Hire the best QBlade experts for your company

I’m Sergio Perez Fontana, an Aerospace Engineer, Manager, and Technologist with over 30 years of experience in Flight Sciences and Structures. My career spans many successful aircraft programs at Boei... Read more

I’m Sergio Perez Fontana, an Aerospace Engineer, Manager, and Technologist with over 30 years of experience in Flight Sciences and Structures. My career spans many successful aircraft programs at Boeing, Gulfstream, Bombardier, Bell Helicopter, and Embraer, where I led cross-functional teams in driving innovations through process and design optimization. I’ve led the implementation of advanced methodologies integrating advanced aerospace and exponential technologies for aircraft and other high-performance products maximizing efficiency and effectiveness. I have also developed a deeper specialty in Generative Design and Structural Optimization. Since 2014, I’ve explored and applied topology optimization and AI-driven generative design techniques, leveraging various generative design tools to inspire better, more efficient designs. For example, I contributed to achieving significant weight reduction in thick aluminum plates used to support heavy monuments on the Boeing VC-25B New Air Force One Presidential Aircraft, achieving tangible benefits in structural performance and cost. Traditional design methods often yield heavy, costly parts with underutilized material after long design processes. Every structural component, regardless of the scale of the project or budget, can benefit from my proprietary AI-driven workflows to transform conventional designs into structures that are: - Stronger and lighter: Eliminating unnecessary mass while exceeding performance requirements. - Optimized for manufacturability: Custom-tailored for efficient, scalable production using subtractive or additive processes. - Cost-effective and ready for validation: Minimizing engineering effort and material usage while seamlessly integrating into certification and operational workflows. This approach delivers high-quality structural engineering solutions faster and at a lower cost. Whether you’re developing an advanced component for a Martian flying vehicle or a flying hydrofoil board over water, I bring deep aerospace expertise and advanced AI tools to help you overcome your design challenges.

Proficient with 2D and 3D CAD design for manufacturing and rendering in the field of mechanical, aerospace and manufacturing engineering

Proficient with 2D and 3D CAD design for manufacturing and rendering in the field of mechanical, aerospace and manufacturing engineering

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

Expert in Fluid Mechanics, CFD, Heat Transfer, Machine Design, Materials, Solidworks, Ansys and much more

Expert in Fluid Mechanics, CFD, Heat Transfer, Machine Design, Materials, Solidworks, Ansys and much more

Expert in Solidworks, CATIA, Autodesk Inventor, and QBlade. A Master's degree holder in Automobile Engineering having experience in Research and Development from Autoliv.

Expert in Solidworks, CATIA, Autodesk Inventor, and QBlade. A Master's degree holder in Automobile Engineering having experience in Research and Development from Autoliv.

2D, 3D CAD in Autodesk and Solidworks drawing formats. Mechanical. 2D Drafting up to Grade 12, then Autocad expertise, 30 years+ of deep technical expertise in a number of areas. Inventor of the... Read more

2D, 3D CAD in Autodesk and Solidworks drawing formats. Mechanical. 2D Drafting up to Grade 12, then Autocad expertise, 30 years+ of deep technical expertise in a number of areas. Inventor of the Harvistor Starwind5 Wind Turbine.

If you have innovative product ideas, I am ready to bring them to life. LET'S DESIGN AND BUILD A PROTOTYPE !!!! I am a Mechanical Design Engineer with expertise in Industrial Product Design and devel... Read more

If you have innovative product ideas, I am ready to bring them to life. LET'S DESIGN AND BUILD A PROTOTYPE !!!! I am a Mechanical Design Engineer with expertise in Industrial Product Design and development, 3D CAD/CAM designs, product and prototype manufacturing, rapid prototyping, 3D printing and CNC manufacturing. I have more than 7 years of experience in the design and manufacturing industry. My areas of expertise includes: 1. 2D/3D CAD Modelling in Fusion360, Autodesk Inventor, Solid works, AutoCAD and Creo Parametric 2. STL files for 3D printing, developing physical cheap prototypes locally using 3D printers and CNC machines 3. Prototype development from concept, design and CAD modelling to physical manufacturing 4. Generating CAM programs through MasterCAM, Siemens NX and Creo Manufacturing Module 5. Product and Prototype development with complete manufacturing documentation ( 2D/3D Engineering drawings, Assembly drawings, process charts, product animation, generating CNC/laser-cutting toolpaths, recommended type of manufacturing process and tool selection etc.) 6. Development of Product process charts and production documentation for entrepreneurs to help them produce physical prototypes through CNC machining, 3D printing, fabrication and casting etc. 7. Converting hand-drawn concepts to engineering drawings in AutoCAD based on real world dimensions for manufacturing or prototype development. 8. Design for Manufacturing (DFM) 9. Rapid Prototyping and Reverse Engineering 10. Realistic Keyshot Renderings

Background in CAD and Design, having worked for multiple engineering firms in Vancouver, Canada. Many of the projects were in Oil/Gas, Infrastructure, Hydro Dams, and Bridge. I used AutoCAD as well as... Read more

Background in CAD and Design, having worked for multiple engineering firms in Vancouver, Canada. Many of the projects were in Oil/Gas, Infrastructure, Hydro Dams, and Bridge. I used AutoCAD as well as Revit, including the 3D and 2D aspect of both software. I have also served a number of clients in the residential field, helping them develop floor plans for new homes and renovations.

I'm a Mechanical Engineer with 20+ years of experience in the energy industry with emphasis in the oil and gas sector. Experienced with the management of product portfolios, commercial services, proje... Read more

I'm a Mechanical Engineer with 20+ years of experience in the energy industry with emphasis in the oil and gas sector. Experienced with the management of product portfolios, commercial services, project management and field and engineering operations. As part of global operations of the Engineering, Manufacturing & Sustaining division of SLB (former SCHLUMBERGER OILFIELD SERVICES) gained experience with CAD on several worldwide product lifecycle projects supported from Aberdeen and Pune, from fixing NPD projects, deploying custom JIGs tools for problem solving during field operations, to creating customized products for specific client needs.

We are architects and designer to help you for your projects working as a free lancer from last 2 years....

We are architects and designer to help you for your projects working as a free lancer from last 2 years....

My name is Pavla, I am an architect and visual artist. I archieved my diploma degree at CTU Universit in Prague, where I gave been working in different studios. After my graduation i started to work i... Read more

My name is Pavla, I am an architect and visual artist. I archieved my diploma degree at CTU Universit in Prague, where I gave been working in different studios. After my graduation i started to work in Amsterdam for ona dutch studio, where I had been for almost 3 years until December 2019. Since that I am freelancing, focusing on architecture, 3d modeling and visual art.

To Whom It May Concern, I am pleased to introduce myself: my name is Roberto Sorrentino, born in Magenta, province of Milan, on April 21, 1959. I currently reside in Modugno, province of Bari, where... Read more

To Whom It May Concern, I am pleased to introduce myself: my name is Roberto Sorrentino, born in Magenta, province of Milan, on April 21, 1959. I currently reside in Modugno, province of Bari, where I have been married for 36 years to my wife, who is currently retired. My professional journey began in 1972, right after finishing compulsory education. I started as an apprentice in a workshop, where I learned the art of model making for foundries, working on machinery and carpenter's tools for about five years. This period allowed me to gain solid experience and then embark on an independent career. Since 1977, I have worked diligently with major companies such as Breda Fonderie Bari, Nuovo Pignone Bari, and Fonderie Agusta in Benevento. These opportunities helped me consolidate my reputation and secure orders for the construction of new design models, especially for oil plants. I vividly remember the moment when I built my first multi-stage pump body at the age of 27. After working for 28 years, I decided to close my business due to disagreements with other partners. However, this did not dampen my passion and commitment to the industry. I gained skills in VISI CAD software rel.14, updated to release 20, and offered my services as an external CAD Designer for prestigious model and foundry companies such as Persico di Nembro and Fonderie CAB di Bastiglia. My experience also includes six months at a local iron carpentry, COMOSUD in Brindisi, where I worked on construction drawings and material lists. In 2016, I had to reduce my activities to care for an ill family member, and in 2018, I closed my VAT number. However, I have never stopped cultivating my passion and skills. Currently, I offer my services to 3D printers and carpentries for limited remote work. I also possess solid proficiency in using the OPEN OFFICE software. Certified as a Protected Category, in compliance with Law 68/99. I remain available for further information or clarification and thank you in advance for your attention. Best regards, Roberto Sorrentino Contact details: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Mobile: 3294705474

-accuracy -right on time -sociability All projects carried out by me were done right on time, with high quality and without hack work. My main job is to convert the point cloud into a 3d model and 2d... Read more

-accuracy -right on time -sociability All projects carried out by me were done right on time, with high quality and without hack work. My main job is to convert the point cloud into a 3d model and 2d drawings. I also model the details and make it out. I develop interior and exterior design, perform visualization.

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

Hello this Mohan Caddes with good experience in mechanical designing field. I am Sure that I can able to fulfill the need of hirer.

Hello this Mohan Caddes with good experience in mechanical designing field. I am Sure that I can able to fulfill the need of hirer.

I am mechanical engineer having 10 years experience in CAD/CAM, product development and working with design outsourced projects with local and international clients.

I am mechanical engineer having 10 years experience in CAD/CAM, product development and working with design outsourced projects with local and international clients.

Until now, I designed and developed 500+ projects in India and Abroad. Also do research and development on different product verticals in the field of Engineering, Medical, Solar, and Food Industry.

Until now, I designed and developed 500+ projects in India and Abroad. Also do research and development on different product verticals in the field of Engineering, Medical, Solar, and Food Industry.

We provide services & consulting in different areas: -Design of machines, assemblies and parts. -3D Design using SolidWorks, Catia, MegaCAD, Inventor, AutoCAD, Unigraphics-NX, Adobe Photoshop, Cinem... Read more

We provide services & consulting in different areas: -Design of machines, assemblies and parts. -3D Design using SolidWorks, Catia, MegaCAD, Inventor, AutoCAD, Unigraphics-NX, Adobe Photoshop, Cinema 4D, Rhinoceros 5. -Analysis of structures and mechanical stress(FEA) using Ansys, SolidWorks. -3D Printing, CNC milling of plastics and metal, 3D Scanning with reverse engineering and Mould Design. -Electrical Engineering, PCB design, circuitry in Altium Designer. -CAD Rendering, Product Design, Enclosure Design. -Technical Writing: English, German.

I am mechanical engineer with more than 15 years of experience in Product design n development of Automotive components such as Interior carpets, Seating n HVAC. Expertise in CATIA Solid and Surface m... Read more

I am mechanical engineer with more than 15 years of experience in Product design n development of Automotive components such as Interior carpets, Seating n HVAC. Expertise in CATIA Solid and Surface modeling. Also expert in CATIA DMU KINEMATIC workbench.

🔹 Mechanical Design Engineer | CAD Machines Designer | Automation Specialist Welcome to my LinkedIn profile! I'm a results-driven mechanical design engineer, specializing in CAD machines design and... Read more

🔹 Mechanical Design Engineer | CAD Machines Designer | Automation Specialist Welcome to my LinkedIn profile! I'm a results-driven mechanical design engineer, specializing in CAD machines design and automation. With a degree from Damascus University, I graduated in 2021 and have since been dedicated to pushing the boundaries of innovation in the field. 🔸 Mechanical Design Expertise: As a #CAD_machines_designer, I leverage my skills and proficiency in #Autodesk_Inventor to develop cutting-edge designs and prototypes. From conceptualization to final production, I ensure that every detail is meticulously crafted to meet the highest standards of quality and functionality. 🔸 Automation Proficiency: Beyond mechanical design, I possess a good understanding of automation technologies, including Programmable Logic Controllers (#PLC), Human-Machine Interfaces (#HMI), and Variable Frequency Drives (#VFD). With this expertise, I can optimize processes and enhance productivity through streamlined automation solutions. 🔸 Continuous Learning: In an ever-evolving industry, I stay updated with the latest advancements in mechanical design and automation technologies. I embrace continuous learning to sharpen my skills and expand my knowledge base, ensuring that I remain at the forefront of innovation. 🔸 Let's Connect: If you're looking for a passionate #mechanical_design_engineer with a knack for #CAD machines design and expertise in automation, let's connect! I'm always open to exciting opportunities and collaborations. Feel free to reach out to me through LinkedIn or via email at: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ #MechanicalDesign #CADDesign #Automation #PLC #HMI #VFD #Innovation #Freelance #ContinuousLearning #LinkedIn

I have completed my bachelor's degree in Mechanical engineering. I am a certified Solid Works designer & AUTO CAD and proficient in Solid works and 3-D designing.

I have completed my bachelor's degree in Mechanical engineering. I am a certified Solid Works designer & AUTO CAD and proficient in Solid works and 3-D designing.

Top-Tier CAD Design & Engineering Solutions -> I am a dedicated Mechanical Designer with extensive experience in transforming complex ideas into high-quality 3D models and manufacturing-ready drawing... Read more

Top-Tier CAD Design & Engineering Solutions -> I am a dedicated Mechanical Designer with extensive experience in transforming complex ideas into high-quality 3D models and manufacturing-ready drawings. My goal is to provide precise, professional, and photorealistic design solutions that help clients bridge the gap between concept and reality. My Core Competencies: -> 3D Modeling & Product Design: Expert-level proficiency in creating detailed parts and complex assemblies. -> Photorealistic Rendering: High-end visualization for marketing, investor pitches, and product catalogs. -> 2D Technical Drawings: Precise drafting including dimensions, tolerances, and BOMs (Bill of Materials). -> Reverse Engineering: Converting hand sketches or 2D images into accurate 3D CAD data. Software Mastery: -> SolidWorks / Autodesk Fusion 360: For parametric modeling and engineering. -> AutoCAD: For 2D layouts and technical schematics. -> KeyShot / Blender: For industry-leading rendering and lighting. Why Work With Me? I prioritize "Design for Manufacturing" (DFM), ensuring that every file I deliver is not just a pretty picture, but a functional design ready for CNC, 3D printing, or injection molding. I am committed to clear communication, strict deadlines, and providing all necessary native file formats (STEP, IGES, STL, DWG). Let’s bring your next innovation to life.

Trained mechanical design engineer with finely tuned technical writing, analytical thinking, and collaborative skills. High level skills of using design software: SolidWorks, Autodesk Inventor, Komp... Read more

Trained mechanical design engineer with finely tuned technical writing, analytical thinking, and collaborative skills. High level skills of using design software: SolidWorks, Autodesk Inventor, Kompas 3D. 2+ years experience of working in machine-building industry. 5 years of industry-specific education Experience: MEDIA DISPLAY GROUP Design engineer (11.2017 - present) Creating prototypes using CAD software Calculation of production costs Researching whether the design will work and be cost effective Providing full project management process from the prototype development to manufacturing and logistics BILOTSERKIVMAZ LLC Deputy head of warranty service department (05.2017 - 11.2017) The workflow organisation Analysis of performance indicators of agricultural machines Preparing detailed reports BILOTSERKIVMAZ LLC Engineer of warranty service department (08.2015 - 05.2017) Providing customers support service Assembling of the machines and putting them into operation Developing of proposals for improving machines

A highly skilled mechanical engineer with more than 10 years of experience in mechanical engineering, specialising in hydro and thermal power plant mechanical maintenance. Proficient in hydro turbine,... Read more

A highly skilled mechanical engineer with more than 10 years of experience in mechanical engineering, specialising in hydro and thermal power plant mechanical maintenance. Proficient in hydro turbine, marine engine, turbocharger maintenance, and failure diagnostics. Experienced in using CAD software, including SolidWorks and AutoCAD, to design, analyse, and modify mechanical components for improved plant performance and reliability.

Hello visitor! First let's take a moment and let me show you some gratitude for visiting my profile and showing interest in hiring me by reading this content. I am a mechanical engineer. I have... Read more

Hello visitor! First let's take a moment and let me show you some gratitude for visiting my profile and showing interest in hiring me by reading this content. I am a mechanical engineer. I have knowledge of Solidworks, Autocad, Fusion 360, Ansys, Keyshot, Blender. I can provide you good creative design as per your requirement. I am a full time freelancer so i reply mostly within an hour except when i am unable to access internet or I am asleep ! ( sorry but a man gotta sleep ! ;) ) As an amateur i provide free after completion support for my every project and contest. I will be there till you get satisfaction from my work. Conclusion : I will provide my best results and will not provide any opportunity to you to complain ! At last, again thank you and have a good day/night !

My name is Margarita, and I am the founder and CEO of ICAD3D. 3D modeling and design have always been my passion until eight years ago, I finally turned it into my profession. I specialize in jewelry... Read more

My name is Margarita, and I am the founder and CEO of ICAD3D. 3D modeling and design have always been my passion until eight years ago, I finally turned it into my profession. I specialize in jewelry modeling. For the past six years, I've been developing designs for wholesale jewelry companies. I work internationally and are up to date with all software currently present on the market

I am working as a mechanical design engineer and have decent knowledge in the engineering design field. I have the professional experience to design a final product from its initial ideas and requirem... Read more

I am working as a mechanical design engineer and have decent knowledge in the engineering design field. I have the professional experience to design a final product from its initial ideas and requirement. Catia and Siemens NX are the major 3D modeling software I use, to make 3D parts and 2D drawings. I always try to maintain proper drafting rules in engineering drawing to deliver ease to the clients as well as the manufacturers. As a young engineer I try to explore more industries and products, it confers me a good knowledge in this field. Furthermore, I have good knowledge of design engineering, which enables me to deliver a benign design solution.