Hire the best freelance PLAXIS 2D expert designers for your company

I am a practicing Structural and Geotechnical design Engineer.

I am a practicing Structural and Geotechnical design Engineer.

I am a responsible, ambitious and professional. Last year I have won the first place for best project in general in the international competition ICAMES for “Stabilization of the Skopje Aqueduct”. I h... Read more

I am a responsible, ambitious and professional. Last year I have won the first place for best project in general in the international competition ICAMES for “Stabilization of the Skopje Aqueduct”. I have various certificates from different universities such as ZIGURAT, Bogazici, ICASEM and ICAMES.

I am civil engineer with more than 8 years experience in drafting design and supervision of civil works, I have more than 6 years experience in drafting and design of residential and infrastructure s... Read more

I am civil engineer with more than 8 years experience in drafting design and supervision of civil works, I have more than 6 years experience in drafting and design of residential and infrastructure structures I am very interested to work as a cad freelancer ,because i believe in my self my work correctness and fast worker, Regards

Hey there, I'm Charbel Hachem, and I'm on a mission to make the world a better place, one Civil Structural Engineering feat and data project at a time! My Skill Set: 🏗️ Civil Structural Engineering:... Read more

Hey there, I'm Charbel Hachem, and I'm on a mission to make the world a better place, one Civil Structural Engineering feat and data project at a time! My Skill Set: 🏗️ Civil Structural Engineering: With a solid foundation in structural analysis and design, roads and highways design, traffic and transportation studies and project management, I bring experience and noteworthy achievements to the table. 📈 Data Science: I leverage data-driven insights to enhance decision-making, excelling in data analysis, machine learning, and predictive modeling, ensuring well-informed choices. 🛠️ Data Engineering: I'm proficient in constructing data pipelines, integrating datasets, maintaining databases, and implementing Big Data solutions for scalable, robust solutions. Why Choose Me? My analytical approach and interdisciplinary expertise empower me to tackle engineering and data-related challenges with precision and creative solutions. I manage projects with excellence and maintain open communication for your peace of mind. If you're seeking a professional who can provide structural engineering insights and leverage data for informed decisions, I'm here to collaborate. Let's work together to elevate your projects and drive innovation. Feel free to reach out to discuss your project or inquire about my services. I'm excited to be part of your project success story.

Assistant Professor, Department of Civil Engineering, Payam-e-Noor University, Tehran, Iran

Assistant Professor, Department of Civil Engineering, Payam-e-Noor University, Tehran, Iran

Eng. Islam Saudi is a Structural Engineer with about 11 years of experience in design of projects including underground metro, water and wastewater plants,high rise buildings,repairing of structures a... Read more

Eng. Islam Saudi is a Structural Engineer with about 11 years of experience in design of projects including underground metro, water and wastewater plants,high rise buildings,repairing of structures and precast building. Eng. Islam gained great experience in the analysis and design of RC structures practicing various worldwide building codes including the ACI, BS Codes of Practice, Eurocode and Egyptian Code (ECP), Eng. Islam gained great experience in following programs - PLAXIS; Finite Element Code for Soil and Rock Analysis including the retaining structural elements. - SAP 2000; Structural Analysis Program. - SAFE; Slab Analysis by the Finite Element Method - ETABS; Extended 3D Analysis of Building systems - PROKON, PCA-COL - CONCISE BEAM, Analysis and design of precast prestressed elements (beams,HCS) - Microsoft office; MS Excel, MS Word, MS Power Point. - AutoCAD - Revite structure -Concise Beam

Softprom is a trusted Value Added IT Distributor with over 20 years of experience delivering CAD, graphics, and engineering software solutions across Europe and the CIS. We partner with industry leade... Read more

Softprom is a trusted Value Added IT Distributor with over 20 years of experience delivering CAD, graphics, and engineering software solutions across Europe and the CIS. We partner with industry leaders such as Adobe, Bentley Systems, Cadence, Chaos, Corel, Dassault Systèmes, Hexagon, Onyx Graphics, Wacom, and ZWSoft, providing access to world-class design and visualization tools. Our CAD & Graphics division supports professionals in architecture, engineering, manufacturing, and creative industries. We offer licensing, consulting, technical support, and training to help clients maximize the value of their software investments. From 2D/3D CAD and BIM to product design, rendering, simulation, and digital content creation — Softprom helps you build smarter, design faster, and create with confidence.

I have done 8.5 Machine Installation and Maintenance in Heavy Industrial Area. I can read and draw any complex drawing I have 4+ Years of hands-on experience working with Solidworks & AutoCAD. 1. 3D... Read more

I have done 8.5 Machine Installation and Maintenance in Heavy Industrial Area. I can read and draw any complex drawing I have 4+ Years of hands-on experience working with Solidworks & AutoCAD. 1. 3D molding and 2D detailing drawing of different parts of the machine are done through Solidworks & AutoCAD . 2. If any machine of the plant has to be modified or production has to be increased. Modification machine have to be explained to the top management by creating conceptual design and drawing. Implementing the work as per drawing.

Committed to provide quality service with honesty, I am a Mechanical Engineer having 17 years experience in Product / Tool, Machine Design, Furniture Design, Concept Development, Product Development.... Read more

Committed to provide quality service with honesty, I am a Mechanical Engineer having 17 years experience in Product / Tool, Machine Design, Furniture Design, Concept Development, Product Development. Being an expertise in Solid-works, Solid-edge, Uni-graphics, Sketch-up & Auto-cad, I mostly test everything in 3D before making detail drawings, most of the time. I am very well versed with manufacturing processes & thus provide designs/drawings ready for manufacturers with all the required files including stl/step/iges/dxf/dwg/pdf/rendered images etc. Being a full time designer, I can provide quick turnaround, so you can rely on me for deadline results. I have completed more than 12 years of working via Odesk/▒▒▒▒▒▒ & have worked with more than 200 clients.I have delivered desired results for every project & believe in accepting only those projects for which I can provide desired results. I have worked on machines/machine components, sheet metal products, wooden/steel/sheet metal furniture items, Enclosure/casing for electronic devices, Plastic injection molded products, manufacturing drawings, consumer accessories, wearable products & many more. Product Design/Prototype for 3d printing. Looking for long term association with the employers and provide the best services. Services offered : 1. 3D-Modeling / conversion / house plans /Interior Design. 2. Concept to product development. 3. Product / Tool / Machine design. 4. Manufacturing drawings. 5. General fabrications. 6. Sheet metal developments/Injection molded parts/ products for pressure die casting. 7. Component & Assembly drawings. 8. Component costing. 9. Rendering. 10.Technical Solutions. 11. Prototypes / 3D printing. 12. Reverse Engineering. Thanks & Regards, Shiv K Mittal

Mechanical engineer Fluent experience of solid works, Auto cad, Testing material and and analysis (Ansys) of products.

Mechanical engineer Fluent experience of solid works, Auto cad, Testing material and and analysis (Ansys) of products.

Diplomaed mechanical engineer with 7 years of experience in production and a founder of a manufacturing company. I have earned my experience in engineering, 3D modeling and product development by desi... Read more

Diplomaed mechanical engineer with 7 years of experience in production and a founder of a manufacturing company. I have earned my experience in engineering, 3D modeling and product development by designing products like agricultural cultivators, app-controlled card dealers, gun silencers, furniture, injection molds etc. I am looking forward to design or re-design your product that considers manufacturing costs and available producing technologies. If you are in need of some 3D modelling service and want a professional approach then feel free to contact me and ask further questions.

I'm 26 yearsold. I'm using Solidworks and I have CSWP, CSWPA-DT. I'm can do everything after 6:00PM GMT+7

I'm 26 yearsold. I'm using Solidworks and I have CSWP, CSWPA-DT. I'm can do everything after 6:00PM GMT+7

I am CAD Technician creating 2D drawings, 3D models for products and parts in construction and manufacturing industries. With background in furniture design and production, I am highly proficient in a... Read more

I am CAD Technician creating 2D drawings, 3D models for products and parts in construction and manufacturing industries. With background in furniture design and production, I am highly proficient in autoCAD, Rhinoceros 3D, Adobe Photoshop/Lightroom and a strong understanding in precision drafting. My attention to detail, combined with my ability to manage multiple projects simultaneously, ensures that I can meet tight deadlines without compromising on quality.

I'm a qualified construction engineer with the 14 years of experience. Have a Diploma of Master of Engineering: Shipbuilding. Worked in a Marine Design Bureau. My last finished project was 11982 "Lado... Read more

I'm a qualified construction engineer with the 14 years of experience. Have a Diploma of Master of Engineering: Shipbuilding. Worked in a Marine Design Bureau. My last finished project was 11982 "Ladoga" vessel. Proficient at drafting in AutoCAD, Rhinoceros, AVEVA. Also Maya, Substans and Photoshop

Identifying as driven, constant and consistent in the work I do. I've been working since I was in university, and this strongly shaped my perspective around architecture, interior, and engineering in... Read more

Identifying as driven, constant and consistent in the work I do. I've been working since I was in university, and this strongly shaped my perspective around architecture, interior, and engineering in different working environment.

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a... Read more

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a Professor of Structural Engineering. I am licensed as a Professional Engineer(PE). I am ready to stamp the drawings and calculation sheets with my USA PE stamp if needed. I have extensive experience +25 years of experience including the structural design and analysis of multi-story buildings using structural steel, reinforced concrete, post-tensioned and pre-stressed concrete, deep foundations, and structural masonry. I provided structural forensic studies and structural damage assessments throughout many locations around the world. I served as a credible expert witness and he analyzed and evaluated the cause of failures in a wide variety of structures, such as bridges, buildings, industrial structures, and metro stations under different extreme loading conditions. I am also registered as a structural consultant in the field of seismic assessment of existing buildings at the Applied Technology Council(ATC) of FEMA in California, USA. I work with my professional staff engineers who are into: 1. Excellent complete structural design competence for mainly reinforced concrete, steel, composite & and wooden structures; 2. In-depth knowledge of structural and civil codes (US & European Codes & Standards). 3. Assessment and evaluation the structural safety of the existing buildings; 4. Retrofitting design of un safe structures 5. Prepare the required studies and reports for repair, and strengthening of structures; and 6. Introducing others works related to structural engineering. We are using the most reliable computer software and comply with international codes and local standards, Please contact us for more details or any job inquiry you might have. We are professional, trustworthy, and reliable and offer quality service experience and a quick turn. Your prompt response will be highly appreciated. Note: We offer all engineering services at very competitive and special prices. Thanks & Regards, Structural Engineering Pioneers Bureau, SEPB

I am a mechanical engineering graduate with good skills in Geometry generation and Grid generation using CAD tools. I do performance analyses and computational simulations using CFD solvers.

I am a mechanical engineering graduate with good skills in Geometry generation and Grid generation using CAD tools. I do performance analyses and computational simulations using CFD solvers.

Hello! I specialize in bringing your innovative ideas to life with unmatched precision in Fusion 360, Autodesk Inventor, and SolidWorks. Your aspirations become my blueprint for success. You care to... Read more

Hello! I specialize in bringing your innovative ideas to life with unmatched precision in Fusion 360, Autodesk Inventor, and SolidWorks. Your aspirations become my blueprint for success. You care to know WHAT MY SERVICES & OFFERINGS ARE? 1. TAILORED 3D MODELING: I transform your visions into precise digital realities using CAD SOFTWARE such as Autodesk Fusion 360, Autodesk Inventor and SolidWorks, ensuring every curve, angle, and feature serves a purpose. 2. CUSTOMISED 3D PRINTING DESIGNS: I develop functional, aesthetically pleasing prototypes that meet your specifications and inspire your target audience. 3. FURNITURE DESIGNS: I bring your furniture concepts to life, focusing on designs that enhance space and user experience. 4. PROTOTYPING & MANUFACTURING PROCESS: I bridge the gap between imaginative concepts and manufacturing feasibility, prioritizing your project's unique requirements. 5. RENDERINGS & ANIMATIONS: I capture your product's essence, showcasing its features and benefits through engaging visual storytelling. DELIVERABLES 🔥 🔰.sldprt, .sldasm; .asm; .slddrw; .drw (SOLIDWORKS) 🔰.stl, .stp, fbx, dxf, Adobe Illustrator vectors 🔰CGI, JPEG, .PNG, .PSD, .ai, 🔰.ipt, .iam, .ipn, etc. (AUTODESK INVENTOR, AUTODESK FUSION 360) If you seek a reliable, skilled, and client-focused CAD designer, I'm here to turn your vision into reality. With my dedication to your project's success and a keen focus on aligning with your objectives, we’ll create something truly remarkable.

Hi, I'm a self-motivated and hardworking individual with knowledge of Architecture . Being a highly creative thinker I am enthusiastic about creating beautiful designs and innovative solutions that wi... Read more

Hi, I'm a self-motivated and hardworking individual with knowledge of Architecture . Being a highly creative thinker I am enthusiastic about creating beautiful designs and innovative solutions that will influence the future. My work is always completed in due time without compromising on quality and efficiency which are the values that i strive for. The main objective is to obtain a responsible and challenging position where my education and experience would be put into practice while being resourceful, innovative and flexible.

Designer on Solidworks for more than 5 years, I designee sheet metals as creative products and revering engineering as well ,I rendering an engineering products videos with high quality, currently I... Read more

Designer on Solidworks for more than 5 years, I designee sheet metals as creative products and revering engineering as well ,I rendering an engineering products videos with high quality, currently I'm supervisor engineering Sheetmetal products for 2 years, and following manufacturing process (laser cutting, bending, piercing ,assembly ) , I'm leading (Tachyons team) that design a human power vehicle, I can solve problems with complex parts designing to easy manufacturing it and visualizes it with high-quality images, videos and rendered it as a professional

"Chief Mechanical Engineer and seasoned Mechanical Designer with extensive expertise in SolidWorks and AutoCAD. Passionate about precision engineering, innovative design solutions, and optimizing mech... Read more

"Chief Mechanical Engineer and seasoned Mechanical Designer with extensive expertise in SolidWorks and AutoCAD. Passionate about precision engineering, innovative design solutions, and optimizing mechanical systems for peak performance. Committed to delivering excellence through meticulous attention to detail and a proven track record of successful project execution."

Greetings...! Our aim to provides end-to-end engineering services in various industrial domains using cutting-edge CAD/CAM/CAE technology. When you bring us at work, you realize key benefits li... Read more

Greetings...! Our aim to provides end-to-end engineering services in various industrial domains using cutting-edge CAD/CAM/CAE technology. When you bring us at work, you realize key benefits like: • Lower Project Cost • Faster Schedule • Innovative Design • Value Addition • Higher Quality Vision & Mission: "To establish a global “Power Transmission Design Centre” to help our customers to achieve their objectives of innovation, cost reduction and a faster time to market.“ Area of expertise - - Detailed Product design - 3D CAD modeling - 2D Drawing creation - CAD conversion - CAE Analysis - Simulation - Rendering - CAD Customization Software expertise - - Solidworks - CATIA - UG NX - Creo - FUSION 360 - AutoCAD Feel free to write in case of any further assistance. Regards, Viral Kumar

*Two years of experience as PROJECT ENGINEER in "PCB TEST JIGS & FIXTURE "manufacturing company. *Where I am doing custom designing of PCB TEST JIGS and fixtures for the different customer as per the... Read more

*Two years of experience as PROJECT ENGINEER in "PCB TEST JIGS & FIXTURE "manufacturing company. *Where I am doing custom designing of PCB TEST JIGS and fixtures for the different customer as per their need. *I have a brief knowledge of cad software like AutoCAD, CATIA, Solidworks, creo,NX, draftsight etc. *Also doing the manufacturing job too by machining this product in the CNC MACHINE. *Also more than one year's experience as CNC operator in the same company. *So I have command over the design to final assembly of the custom built product.

Component engineer | ROBERT BOSCH DOO January 2013 - September 2013 - Develop vehicle specific wiper components in Catia V5 according the Bosch design rules - Create detailed 2D drawings in close... Read more

Component engineer | ROBERT BOSCH DOO January 2013 - September 2013 - Develop vehicle specific wiper components in Catia V5 according the Bosch design rules - Create detailed 2D drawings in close cooperation with Bosch production plants and Bosch suppliers - Assure high quality in the development by applying the Bosch quality tools (FMEA, DRBFM) - Document the design in SAP environment - Release project relevant documents (drawings, bill of materials, IMDS) less Structural Engineer | WINASOLAR AG February 2012 - May 2015 - Project developing by making drawings / positions /details in SolidWorks - Design tools for deforming - Preparing drawing release, and bill of materials for all new/ re-designed parts - Static analysis of mechanical structures - Responsible for engineering, layout, pile driving, mounting system assembly, panelization, and DC and AC wiring. - Project implementation in the field and putting into operation less Machine and tools design Engineer | EL-MET Sistem August 2006 - October 2008 - Design machines and tools - Design tools for deforming - Production of technical documentation for tools and equipment - Monitor the development of tools - Static and dynamic analysis of mechanical structures - Planning, directing and overseeing the development of machines and plants - Systematic testing of manufactured components - Organizing and maintaining repairing renewing machine in a production plant - Determination of fault monitoring and intervention service fleet - Preparing drawing release, and bill of materials for all new/ re-designed parts - Design support tools for machines and production procedures - Served as company man communicating with suppliers,vendors and customers.