Hire the best HVAC Shop Drawings experts for your company

Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design... Read more

Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design with other trades. • Design energy efficient HVAC systems in Autocad for residential andcommercial(stores,medical facilities,schools,offices) buildings in NYC also do Shop Drawings. •Coordinate HVAC design with other trades: plumbing,• sprinklers,RCP Review applicable design standard requirements, codes and regulations as they relate to the project according to ASHRAE or NYCECC. •Assist the Lead Mechanical Engineer on the development of Instrumentation and Control design for Mechanical systems. • Approve Shop Drawings. • Prepare plans,specifications,schedules,documentation. • Processing Comecheck and Energy Conservation codes. • Prepare as-built drawings.

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating comp... Read more

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating complex hydraulic control skids for offshore use

Hello! As in current global scenario, it is my ambition to focus on providing clients all over the world high-quality, timely, and cost effective engineering services. I have extensive knowledge and e... Read more

Hello! As in current global scenario, it is my ambition to focus on providing clients all over the world high-quality, timely, and cost effective engineering services. I have extensive knowledge and experience in the design of HVAC Systems, MEP Systems, AutoCAD, Revit etc. Also, I am an expert in HVAC Design, AutoCAD drafting, HVAC shop drawing, As-built drawing and MEP detail drawing. I acquired all of my experiences from a job I served for six years. I'll complete the task in accordance with your acceptance criteria.

A Mechanical Engineer with plenty of experience in drafting floor plans for various building services and discipline. Previously worked in a CAD outsourcing company based here in the Philippines that... Read more

A Mechanical Engineer with plenty of experience in drafting floor plans for various building services and discipline. Previously worked in a CAD outsourcing company based here in the Philippines that caters to consultants and designer from the UK, USA, and Australia. I can provide quick CAD drafting for: Architectural plans, sections and elevations Site Plans Structural Details HVAC layout Plumbing layout Electrical layout Electrical schematics P&ID Schematics Isometric diagrams Turnaround of project will be within a day depending on size and quantity.

To serve the industry where creativity is valued and appreciated to polish my knowledge and enhance my technical and managerial skills as well as to gather and apply my knowledge for the prosperity of... Read more

To serve the industry where creativity is valued and appreciated to polish my knowledge and enhance my technical and managerial skills as well as to gather and apply my knowledge for the prosperity of the organization.

I am a graduate in architectural engineering and have working experience in over 15 years as a designer and project coordinator/supervisor. My last permanent employment for more than 5 years was for... Read more

I am a graduate in architectural engineering and have working experience in over 15 years as a designer and project coordinator/supervisor. My last permanent employment for more than 5 years was for a Swiss Company as a draftsperson/Bauzeichnerin where I prepared formwork and reinforcement plans. Although I am an architect, I love the engineering and the managing part of my job, especially rebar detailing and project development planning. My portfolio includes reconstructions of public and commercial buildings in culturally protected neighbourhoods, reconstruction of residential buildings, new residential one-family and multi-family buildings and complexes, detail plans for prefabricated concrete elements (balconies, prefabricated columns, prefabricated elements for underground railroad lines), detail plans for steel elements, detail plans for wooden elements, etc. I can create any Architectural Plan, Construction Plan, Rebar Detailing, Shop drawings, HVAC Plan drafting in AutoCAD, as well as 3D and BIM Model in Allplan, Revit, ACCA Edificius. I can also create take-offs for various phases of construction.

We are an Facade Contracting & Engineering Company , into this business for more than 5 years and have successfully executed prestigious projects of various sizes. We have a Team of Qualified and Expe... Read more

We are an Facade Contracting & Engineering Company , into this business for more than 5 years and have successfully executed prestigious projects of various sizes. We have a Team of Qualified and Experienced Designers , Project Managers, Site Engineers ,Supervisors and a skilled workforce. We are specialised in Unitised Glazing Systems, Semi- Unitised Glazing Systems , Metal Cladding Systems ( Solid Aluminium / Aluminium Composite Panels) , High End Aluminium and Thermal Break Window Systems, Stainless Steel Handrails/Tension Rod Systems ,Tension Cable net Systems, Dry Stone Cladding Systems and Supporting Structural Fabrications. Spaces. Customization To Customer Satisfaction Timely Quality Completion

Have worked in virtual design (primarily Revit/BIM) since college. Graduated in 2018 and have had heavy experience in the virtual design world since 2020. Read more

Have worked in virtual design (primarily Revit/BIM) since college. Graduated in 2018 and have had heavy experience in the virtual design world since 2020.

1. I do Heat Load calculation in an excel sheet and derive the tonnage for the area to be airconditioned. 2. Do Duct design and Chilled water pipe design with Mcquay sizer software. 3. And do VRV/VRF... Read more

1. I do Heat Load calculation in an excel sheet and derive the tonnage for the area to be airconditioned. 2. Do Duct design and Chilled water pipe design with Mcquay sizer software. 3. And do VRV/VRF design with pipe routings. 4. Convert the design into Autocad 2D drawings as per the requirements. 5. Additionally I do Data Entry work in which I can convert any file format to MS word with reasonable speed and accuracy.

Skilled and Experienced in using Autodesk Revit, Autodesk Fabrication, AutoCAD, Navisworks, PTC Creo Parametric , Ansys. Skilled In REVIT Parametric Family Creation and AutoCAD Block Creation Skilled... Read more

Skilled and Experienced in using Autodesk Revit, Autodesk Fabrication, AutoCAD, Navisworks, PTC Creo Parametric , Ansys. Skilled In REVIT Parametric Family Creation and AutoCAD Block Creation Skilled In Structural and Dynamic analysis using Ansys or any other tool. Skilled 3d Modeler , can model complex 3d structures. Experienced in HVAC Heat load calculations for large scale commercial projects.

It is Abdul Wahed Hassoun, a French-educated through my school Journey then English educated at university. I have a great Interest in Green Buildings Technology, Solar energy systems, HVAC systems,... Read more

It is Abdul Wahed Hassoun, a French-educated through my school Journey then English educated at university. I have a great Interest in Green Buildings Technology, Solar energy systems, HVAC systems, Automotive, Programing, and AI. However, my deep knowledge takes place in BIM, designing HVAC, Plumbing, Firefighting, and pool Design systems. In Addition, I am eager to be creative and like to self-learn. Therefore, I Have Installed several Off-Grid solar systems Photovoltaics inside Lebanon, Finally, I own a small Market, so I bought Groceries and so on… Also, I like to communicate with new faces and experts. “I like to be the Best Version of Myself”.

10+ years’ in the Mechanical Construction Industry – encompassing Pipefitting, Welding, Field Supervision, BIM Coordination and Project Management positions Management of projects exceeding five mi... Read more

10+ years’ in the Mechanical Construction Industry – encompassing Pipefitting, Welding, Field Supervision, BIM Coordination and Project Management positions Management of projects exceeding five million dollars in single contract value Municipal and Private Sector experience New construction and renovation

Professional in 2D and 3D system design and animation using sketchup,3Ds Max and Autocadwith over five years experience. Read more

Professional in 2D and 3D system design and animation using sketchup,3Ds Max and Autocadwith over five years experience.

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching... Read more

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching overseas clients, take the follow-ups, and generate new business. Raywell Studio Pvt Ltd. provides a full range of BIM, Engineering, and Visualization services for a wide variety of Construction Projects. Raywell Studio believes that trust, communication, and collaborative working are key to successful project delivery. We have experience working in a dynamic & complex projects environment and are proud of our strong and lasting relationships with our clients and able to work with key clients closely. As a global BIM expert, we offer 3D-4D-5D and production of Architecture, Structural & MEP Engineering services. We assist some of the International Design-Build and General contracting firms in the USA & Middle East for their projects across the globe. Alice White * www.raywellstudio.com * ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ * https://www.linkedin.com/company/raywellstudio/

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System D... Read more

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System Design & selection • Preventative maintenance • MEP Testing & Commissioning • System diagnostics • Primavera P6 & MS project • Carrier HAP 4.51 • MS Word, Excel & power point • Auto CAD • International standards ( ASHRAE, CIBSE, NEEB, NFPA,) • Technical writing Academic(strength & skills) • Machine design problem solving • Heat transfer • Refrigeration & air conditioning • Thermodynamics • Fluid Mechanics • Mathematics General (Strength & skills) • MS office ( word & excel) • File exchange word to pdf & pdf to word • Primavera p6 • Data Entry • Report writing • Technical writing Skills & Experience: (International Experience: United Arab Emirates & Kingdom of Saudi Arabia) •Preparing & Reviewing Reports, Tender Documents, Engineering Calculations with the source of knowledge, specifications, budgeting and literature for HVAC Projects •Design & calculation of cooling/heating loads of commercial & residential buildings by the use of computer software’s like Carrier HAP (Hourly Analysis Program) • FAHU's, AHU's ,DX & Decorative units Selection. • ventilation & smoke control system design & calculation. • Design & Calculation & sizing of airflow ducts for commercial & residential projects. • HVAC System selection for commercial & residential projects. •Data fixation including HVAC design duty parameters. •Scrutiny and comparing of Shop Drawings with the design and Tender drawings •Checking of plans, drawings and quantities for accuracy of calculations. • preparing of ITPs, Technical submittals & Method of statement for Testing & commissioning & Air balancing. •Preparing & reviewing Testing & Commissioning method statement & O & M Manual for MEP works. •Evaluating designs of HVAC systems, plumbing & drainage, irrigation, swimming pool & fire safety and building automation systems. •Creating and carrying out test procedures for MEP system and ensuring their smooth functioning. •Sharing the T&C plan & the sequence of operation with project engineers. •Preparing/updating commissioning tacking program for monitoring status of commissioning works Witness and verifies site installation, pre & post commissioning of the system/equipment performance based on the approved commissioning procedures in accordance with the design, contracts, plans, specifications and standards of various systems and equipment such e.g., HVAC Systems(CHW pipes chemical treatment, Air & Water balancing, CHW Pumps, Chemical dosing & pressurization units DX & CHW FAHU's, AHU's, FCU's & heat pumps ), Plumbing & Irrigation system , Building Ventilation & Smoke Management System, Firefighting Systems(Fire pumps, Clean agent system , fire suppression system, FHC, ZCV & Cause & effect matrix), & specialized Systems( Swimming pool, SPA & sauna , Jacuzzi & heat pumps) etc. •Documenting reports of progress made in project Projects •DAMAC HILLS by DAMAC properties LLC Dubai United Arab Emirates (2500 Villas different Clusters models, Paramount villas, Nine G+7 Clusters, Service stations ) •DAMAC Towers by Paramount Hotel Riyadh Kingdom of Saudi Arabia ( Two High rise building G + 33 & G + 37) •Tower 108 by DAMAC property development Dubai United Arab Emirates ( G+4P +28) •Ghalia Tower by DAMAC property development LLC Dubai United Arab Emirates ( G+4p +38) Education: •Bachelor of Technology Mechanical Engineering •Marks : 76.56% •Achievements& Rewards: Got a distinction certificate on four consecutive positions at university of engineering & technology Peshawar Got a laptop on a good performance from Higher Education Commission Pakistan •Modules Studied: Refrigeration & Air conditioning, Mechanical Engineering Design, Thermodynamics, Heat & mass transfer, Power plant, Mechanical vibration, Engineering Economics, Installation testing & maintenance of Machines, Fluid Mechanics & Hydraulics Machinery, Theory of Machines, Applied Mechanics, Strength of Materials, Basics Electronics, Mechatronics.

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and... Read more

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design with o... Read more

Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design with other trades. • Design energy efficient HVAC systems in Autocad for residential andcommercial(stores,medical facilities,schools,offices) buildings in NYC also do Shop Drawings. •Coordinate HVAC design with other trades: plumbing,• sprinklers,RCP Review applicable design standard requirements, codes and regulations as they relate to the project according to ASHRAE or NYCECC. •Assist the Lead Mechanical Engineer on the development of Instrumentation and Control design for Mechanical systems. • Approve Shop Drawings. • Prepare plans,specifications,schedules,documentation. • Processing Comecheck and Energy Conservation codes. • Prepare as-built drawings.

Cadeosys(CAD Expedite Outsourcing System) is a CAD and Bim Outsourcing Companies In India. We have the ability to give the best MEP Engineering Services with a high-quality result. For new constructio... Read more

Cadeosys(CAD Expedite Outsourcing System) is a CAD and Bim Outsourcing Companies In India. We have the ability to give the best MEP Engineering Services with a high-quality result. For new construction, renovations, and up-gradation of existing design services, we have a professional team of Engineers with comprehensive competence in Architecture, Structure, and MEP Design Services. From the tender stage onwards, we do a thorough drawing for building purposes under the supervision of an engineer. AEC Services , BIM Services, CAD Outsourcing Services, Engineering Services, Infrastructure Services, and Point Cloud Services are some of our primary services.Through our CAD and BIM knowledge, we provide total engineering support. Whatever your needs are, our team can create a high-quality design for you

I like much what I do and I can help you with great project Read more

I like much what I do and I can help you with great project

I am an executive working in a firm namely The Engineering Design. We are providing exclusive outsource services such as BIM Field Drawings Scan to BIM BIM Clash Detection BIM Content BIM Inte... Read more

I am an executive working in a firm namely The Engineering Design. We are providing exclusive outsource services such as BIM Field Drawings Scan to BIM BIM Clash Detection BIM Content BIM Integration Architectural Shop Drawings MEPF Shop Drawings Structural Shop Drawings HVAC Shop Drawings Parametric family creation Cad to Bim conversion Cost estimation Scheduling and phasing Bim co-ordination Clash test

I am a mechanical designer who specializes in HVAC and Plumbing. My work experience spans over 100 jobs large and small, from larger multi-million dollar projects (such as wastewater treatment facilit... Read more

I am a mechanical designer who specializes in HVAC and Plumbing. My work experience spans over 100 jobs large and small, from larger multi-million dollar projects (such as wastewater treatment facilities and Schools) to smaller renovation projects (such as retail tenant space fit-out). I also have 20 years of CAD experience.

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventu... Read more

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventually becoming a Senior Contracts Manager taking charge of large HVAC installations. My Job description: • Duct design and workshop drawing plantroom layout. • Liase with client / consultants and architect on mechanical building services co-ordination and planning. • Workshop, site co-ordination and supervision. • Air-conditioning chilled, hot water piping schematics and layout details. • Tendering and estimating of jobs • Attend site and co-ordination meeting • Procurement of equipment • Monthly invoicing of contracts • Chilled water pipe calculations using the carrier design program. • Writing and compiling air conditioning maintanace manuals. • Design and manufacture of custom built chilled water air handling units for southern air conditioning contracts After 25 years I moved to a HVAC Design Consultancy Company as a Senior Design Engineer. My Job description • Budget proposal reports • Preliminary design reports • Hvac design. • Liase and architect on mechanical building services coordination and planning. • Attend plannining, site and co-ordination meetings. • Financial control up to final account. • Supervision of contract construction to final completion. • Suppervision of the hvac commissioning

I am a mechanical engineer having seven years of experience in MEP field in Nepal and middle east. I have worked on HVAC design and installation in various commercial, residential and industrial proje... Read more

I am a mechanical engineer having seven years of experience in MEP field in Nepal and middle east. I have worked on HVAC design and installation in various commercial, residential and industrial projects. I have experience in high rise buildings also. I have good knowledge of AutoCAD MEP, Autodesk Revit MEP, Carrier HAP.

Mechanical Engineer Graduated from Alexandria University Egypt Specialized in HVAC, Firefighting and plumbing systems design and drawing using Auto-desk Auto-cad and revit Read more

Mechanical Engineer Graduated from Alexandria University Egypt Specialized in HVAC, Firefighting and plumbing systems design and drawing using Auto-desk Auto-cad and revit