Hire the best freelance Horizontal Alignment expert designers for your company
Alexander M. N.
Horizontal Alignment Designer
Nairobi, Kenya
- QGIS
- AutoCAD
- 3D Design
- CAD Design
- Road Design
- Highway Design
- Roadway Design
- Technical Audit
- Corridor Design
- Junction Design
- Structure Design
- Spur Road Design
- AutoCAD Civil 3D
- Autodesk Civil 3D
- Rural Road Design
- Urban Road Design
- Autodesk Civil 3D
- Civil Engineering
- Road Design Review
- Access Road Design
- Interchange Design
- Road Safety Design
- Vertical Alignment
- Horizontal Alignment
- General CAD Drafting
- Superelevation Design
- PDF to DWG Conversion
- Civil Drafting Services
- AutoCAD Design Services
- Engineering Design Report
- AutoCAD Drafting & Design
- Drafting and Design Services
- Engineering Technical Reports
Autodesk Certified Professional in Civil 3D for Infrastructure Design (Reg. No. ADSK-155-13971) — one of a small number of certified Civil 3D specialists based in East Africa. I bring 4 years of hand... Read more
Autodesk Certified Professional in Civil 3D for Infrastructure Design (Reg. No. ADSK-155-13971) — one of a small number of certified Civil 3D specialists based in East Africa. I bring 4 years of hands-on road and highway design experience: full corridor development, horizontal and vertical alignment design, junction and interchange geometry, cross-sections, and drainage in AutoCAD Civil 3D. Project highlights include the 150 km Ukasi–Garissa–Modika (A3) Road and a technical audit for the Busega–Mpigi Expressway in Uganda. Skilled in AASHTO and Austroads geometric design standards, hydrological screening, quantity computation, and preparation of construction documentation. FIDIC Contracts trained. Available for remote Civil 3D design work on road infrastructure, access roads, wind/solar farm roads, and rural connectivity projects.
Emmanuel A.
Horizontal Alignment Designer
Accra, Ghana
- AutoCAD
- Road Design
- AutoCAD Civil 3D
- AutoCAD Civil 3D
- Autodesk Civil 3D
- Vertical Alignment
- Horizontal Alignment
- AutoCAD Design Services
- Cross Sectional Drawings
- AutoCAD Drawing Services
Civil engineer based in Ghana with hands-on experience delivering complete road design packages in AutoCAD Civil 3D — from horizontal/vertical alignment and corridor modelling through to earthworks qu... Read more
Civil engineer based in Ghana with hands-on experience delivering complete road design packages in AutoCAD Civil 3D — from horizontal/vertical alignment and corridor modelling through to earthworks quantity take-off, section views, and volume reports.
Amr I.
Horizontal Alignment Designer
Riyadh, Saudi Arabia
- GIS
- AutoCAD
- AutoTURN
- ArcGIS Pro
- Road Design
- Civil Design
- Design Engineer
- AutoCAD Civil 3D
- Corridor Modeling
- Microsoft Project
- Autodesk Civil 3D
- Civil Engineering
- Vertical Alignment
- Horizontal Alignment
- AutoCAD Civil 3D ArcGIS
- civil 3d Cross Sections
- civil 3d Superelevation
- Civil Drafting Services
- AutoCAD Design Services
- Civil Engineering Design
- 2D CAD Drafting Services
- AutoCAD Drawing Services
- AutoCAD Drafting & Design
- civil 3d corridor modeling
- Design Engineering Services
Civil 3D Roadway Design Engineer specializing in road geometry and civil design production. I support roadway and infrastructure projects using Autodesk Civil 3D, including existing ground surfaces,... Read more
Civil 3D Roadway Design Engineer specializing in road geometry and civil design production. I support roadway and infrastructure projects using Autodesk Civil 3D, including existing ground surfaces, survey data, horizontal alignments, existing and proposed profiles, assemblies, corridors, superelevation, cross sections, earthwork quantities, and drawing production. My professional experience includes roadway design, municipal engineering, survey coordination, GIS, and technical drawing production. I am available for project-based and ongoing remote Civil 3D support, including individual production tasks and complete small roadway packages.
R. M.
Horizontal Alignment Designer
Ohsweken, Canada
- Mechanical
- Annotation
- Planting Plan
- Parking Design
- Grading Design
- Jewelry Design
- Civil 3d grading
- AutoCAD Civil 3D
- Playground Design
- Vertical Alignment
- Sheet Set Creation
- Landscape Detailing
- 3D Surface Modeling
- Electrical Drafting
- Mechanical Drafting
- Horizontal Alignment
- General CAD Drafting
- PDF to DWG Conversion
- Landscape Architecture
- Civil Site Plan Design
- AutoCAD Dynamic Blocks
- Manufacturing Drawings
- Road & Highway Drafting
- Civil Drafting Services
- Urban Planning & Design
- Paper to CAD Conversion
- Quantity Take-Offs (QTO)
- Cross Sectional Drawings
- Plan and Profile Drawing
- civil 3d corridor modeling
- Standardization of Drawings
- Drafting and Design Services
- Legacy Drawing Conversion Services
Siva M.
Horizontal Alignment Designer
Bengaluru, India
- CAD Design
- 2D AutoCAD
- Road Design
- CAD Drafting
- site grading
- 3D Modeling
- Highway Design
- Microsoft Excel
- Civil 3d grading
- Survey Topography
- Autodesk Civil 3D
- Design & Drafting
- Civil Engineering
- 2D to 3D Modeling
- As-Built Drawings
- Vertical Alignment
- Horizontal Alignment
- General CAD Drafting
- Construction Drawings
- PDF to DWG Conversion
- PDF to CAD Conversion
- Road & Highway Drafting
- 2D CAD Drafting Services
- Autodesk Vehicle Tracking
- AutoCAD Drafting & Design
- civil 3d corridor modeling
- Civil 3D Grading Plan Edits
Jagdish Kalmekar
Horizontal Alignment Designer
Pune, India
- AutoCAD
- Detailing
- 3D Design
- CAD Design
- SolidWorks
- 3D Modeling
- Home Design
- CAD Drawing
- Home Design
- 3D Modeling
- Solid Modeling
- Land Surveying
- 2D & 3D Design
- Highway Design
- Concept Design
- Interior Design
- Homeware Design
- AutoCAD Civil 3D
- Furniture Design
- Land Developement
- Design & Drafting
- Civil Engineering
- 3D Solid Modeling
- Highway Engineering
- Land Survey Drawing
- Toys & Games Design
- General CAD Drafting
- PDF to DWG Conversion
- Civil Drafting Services
- CAD Digitization Services
- AutoCAD Drafting & Design
- SolidWorks Design Services
- 2D to 3D Conversion Services
Hi, I have 15 years experience as AutoCAD 2D & 3D designer. I specialize in Designing of Roads, Highways, Drainage System, Canals and other Land Development like plotting, contouring, surveying etc.... Read more
Hi, I have 15 years experience as AutoCAD 2D & 3D designer. I specialize in Designing of Roads, Highways, Drainage System, Canals and other Land Development like plotting, contouring, surveying etc. I am skilled in Civil 3D, Autodesk Land Development and AutoCAD for 2D/3D designing. I am also exprienced in 3D modeling using Solidworks and AutoCAD, 3D Punch Home design. I have good creativity for conceptualising new design and also perfectionist for detailed drawing preparation. I have done designing of more than 500 kms of road including hilly/2-lane urban and highways. The scope included importing & plotting of survey points and levels, its countour generation, tracing existing alignment, Horizontal Alignment design as per speed limit, Vertical curve design and cross sectional drawing with estimation of quantity in earthwork cutting/filling. I have also worked for many generation of drawings for Residential Buildings, commercial Malls, multi story buildings etc their detailed sectional & Elevation drawing preparation. I am skilled in - 2D AutoCAD drawing detailing with section, dimention, tolerance - 3D Punch Home design - Autodesk Land Development - 3D solid Modeling using Solidworks I value quality of service by delighting customer with delivering perfection in time.
Jonny P.
Horizontal Alignment Designer
Bengaluru, India
- drain
- metro
- AutoCAD
- Railways
- CSi ETABS
- CAD Design
- Road Design
- Road Modeling
- 2D/3D AUTOCAD
- 2D/3D AutoCAD
- Civil Engineer
- Autodesk Revit
- AutoCAD Civil 3D
- Microsoft Office
- Autodesk Civil 3D
- Bentley STAAD.Pro
- Autodesk Civil 3D
- Civil Engineering
- 2D to 3D Modeling
- Bentley ProjectWise
- General CAD Drafting
- 3D Animation Services
- Structural Engineering
- Road & Drainage Project
- Civil Drafting Services
- Concrete Structure Design
- Trimble SketchUp (Google)
- Bentley OpenRail Designer
- AutoCAD Drafting & Design
- CAD Automation Engineering
- civil 3d corridor modeling
- Bentley OpenRoads Designer
- 2D & 3D Structural Detailing
- Drafting and Design Services
- concrete structure detailing
- Structural Design and Analysis
- 2D CAD Drawing to Revit Conversion Services
I’m a Civil Engineer with 20+ years of experience in Railways, Metro Rail, Road Infrastructure, and Depot design. I specialize in using AutoCAD Civil 3D to deliver precise: -Horizontal and Vertical Al... Read more
I’m a Civil Engineer with 20+ years of experience in Railways, Metro Rail, Road Infrastructure, and Depot design. I specialize in using AutoCAD Civil 3D to deliver precise: -Horizontal and Vertical Alignment Designs -Corridor Modeling for Rail and Road Projects. -Section Sheets and Quantity Takeoff (Earthwork & BOQ). -Profile Sheets, Super Elevation, Target Surface, Assemblies. -Depot Track Layout and Optimization. -Quantity Estimations and Civil Drawings for Metro Projects I’ve led the design for Bangalore Metro Phase-2, 2A & 2B, and modeled Baiyappanahalli Depot expansion with Two Level Depot using Civil 3D. I’m available for part-time or project-based work, delivering high-quality outputs with speed and clarity. Let’s collaborate to bring precision to your infrastructure project!
Arjun P.
Horizontal Alignment Designer
Kathmandu, Nepal
- GIS
- ArcGIS
- AutoCAD
- CAD Design
- Civil Design
- Autodesk Revit
- AutoCAD Civil 3D
- Civil Engineering
- Engineering Design
- Autodesk Infraworks
- Autodesk InfoDrainage
- Autodesk Vehicle Tracking
- Bentley OpenRoads Designer
- HEC-RAS Hydrologic Engineering
- HEC-HMS Hydrologic Modeling Sy
Professional Civil engineer with -10+ years experience in Civil design of roadways, site development and utility design for water, sewer, storm, and other utilities (electric, gas, telecommunication... Read more
Professional Civil engineer with -10+ years experience in Civil design of roadways, site development and utility design for water, sewer, storm, and other utilities (electric, gas, telecommunication) - Licensed Professional Engineer (PE) in Texas and Maryland. - Demonstrated expertise in civil engineering projects, including topographic and boundary surveys, utility conflict investigations, sewer and waterline rehabilitation, roadway widening, drainage analysis, site grading, and storm water modeling and design. - Proficient in AutoCAD, Civil3D, MS Office Suite, ArcGIS, HEC-RAS, HEC-HMS, SWMMM, Open Roads Designer, MicroStation, and Geopak. - Skilled in developing 2D & 3D CAD standards, managing survey practices, and ensuring quality assurance/quality control for civil engineering designs. - Experienced in preparing project deliverables, including plan and profile drawings, corridor modeling, earthwork calculations, utility coordination, SWPPP, accessibility plans, and traffic control plans. -Can work in roadway design and modeling projects in Civil 3d, and OpenRoads designer from field to finish - survey processing (existing topo and boundary drawing, creation of existing and ground surfaces) - design of horizontal and vertical alignment of proposed roadway, - analysis of and mitigation of drainage impacts of proposed roadway and storm water mitigation, - design and modeling of underground storm sewer network, detention pond, drainage channel and outfall design. -creation of horizontal and vertical roadway alignment and profile - corridor modeling of roadway geometry based on AASHTO design guidelines, - preparation of existing and proposed cross sections and creation of cut-fill earthwork calculations - design for proposed roadway signage and pavement stripping - create final design submittal including project phasing, temporary traffic control measures, utility coordination and relocations, design details, calculations, plan and profile sheets - Highly capable in site design for residential and commercial properties -Expertise in site modeling and permit applications for residential and commercial properties.
Viji P.
Horizontal Alignment Designer
Coimbatore, India
- AutoCAD
- Drafting
- CAD Design
- 3D Modeling
- CAD Drafting
- AutoCAD Civil 3D
- AutoCAD Civil 3D
- Civil Engineering
- As-Built Drawings
- Engineering Drawing
I am a Road Engineer and CAD Expert with expertise in roadway design, geometric alignment, highway planning, and detailed CAD drafting for civil infrastructure projects. With hands-on experience using... Read more
I am a Road Engineer and CAD Expert with expertise in roadway design, geometric alignment, highway planning, and detailed CAD drafting for civil infrastructure projects. With hands-on experience using AutoCAD, Civil 3D, and other civil engineering software, I deliver accurate, efficient, and professional design solutions tailored to project requirements. I specialize in: Road and highway geometric design (horizontal & vertical alignments) CAD drafting and 3D modeling for civil engineering projects Plan/profile sheets, cross-sections, and earthwork calculations Drainage layout and road safety design components Site development and grading plans As-built drawings and construction documentation Quantity estimation and detailed engineering drawings What I offer: High-quality, standards-compliant designs Fast delivery with attention to precision Clear communication and collaborative design workflow Ability to translate engineering concepts into detailed, build-ready CAD models and drawings
Jack L.
Horizontal Alignment Designer
Raleigh, United States
- FEA
- AutoCAD
- CAD Design
- Infraworks
- AutoCAD Civil 3D
- As-Built Drawings
I help Civil Engineers, Land Surveyors and Site Developers turn raw survey data, PDFs, redlines and hand sketches into accurate, dynamic and construction-ready Civil 3D drawings. I'm a Civil 3D Speci... Read more
I help Civil Engineers, Land Surveyors and Site Developers turn raw survey data, PDFs, redlines and hand sketches into accurate, dynamic and construction-ready Civil 3D drawings. I'm a Civil 3D Specialist with 7+ years of experience and 100+ projects completed for clients in the US, UK, Canada and Australia. I don't deliver flat lines - you get a true Civil 3D file with working surfaces, alignments, corridors and pipe networks that you can actually edit and submit for permits. WHAT I CAN DO FOR YOU: 1. Survey Processing & Existing Conditions Survey points (CSV/TXT) to Existing Surface, Point Cloud Classification & Surface Extraction (ReCap), Contour Mapping, DEM to Surface, As-Built Drawings, Topographic Plans. 2. Road, Highway & Corridor Design Horizontal Alignments, Vertical Profiles & Profile Views, Assembly & Sub-assembly Creation, Corridor Modeling, Superelevation, Intersection Design, Plan & Profile Sheets, Cross-Section Sheets, Quantity Takeoffs. 3. Site Grading & Earthwork Commercial & Residential Site Grading Plans, Parking Lot Grading, Building Pad Design, Feature Lines & Grading Objects, Cut/Fill Surface & Volume Reports, Earthwork Balancing. 4. Drainage & Utility Design Pipe Networks for Storm Drain, Sanitary Sewer & Water Lines, Pressure Pipe Networks, Structure & Pipe Profile Views, Manhole & Inlet Schedules, Utility Conflict Checks. 5. Land Development & Subdivision Parcel Creation, Lot Layout & Subdivision Plats, Right-of-Way Plans, Demolition & Erosion Control Plans, Final Plat Maps. WHY CLIENTS HIRE ME: ✓ Real Civil 3D - No exploded blocks. All surfaces, corridors and pipe networks remain dynamic and fully editable. ✓ Survey-Accurate - Verified state plane coordinate systems, correct units and NAD83/NAVD88 or client-specified datum on every project. ✓ Clean Standards - Organized layers, proper styles, labels and CTB plot-ready sheets per APWA / DOT / City standards. ✓ Right the First Time - Every drawing is checked for accuracy before delivery, with revisions built into every scope. ✓ Reliable Communication - Clear scope, fixed price and defined delivery date, agreed upfront before work begins. DELIVERABLES: Native Civil 3D .DWG with dynamic data, AutoCAD .DWG/.DXF, PDF Plan Sets, Earthwork & Material Quantity Reports, all to construction documentation standards. TURNAROUND: 48 hours for point-to-surface, topo and single grading plans. Corridor, utility network and subdivision projects are scoped and timed individually based on complexity. SOFTWARE: AutoCAD Civil 3D, AutoCAD, Navisworks, InfraWorks, ReCap, Google Earth Pro, Bluebeam If you have survey data, a PDF plan or even a hand sketch - send it over. I'll review it and send you a clear scope, timeline and fixed price within a few hours. Let's get your plans permit-ready.
Peter C.
Horizontal Alignment Designer
Walnut Creek, United States
- AutoCAD
- Drafting
- Surfacing
- CAD Design
- AutoCAD Civil 3D
Throughout my career, I have leveraged AutoCAD Civil 3D to deliver accurate, standards-compliant drafting across several core civil and transportation disciplines: • Offsite & Transportation Plans (C... Read more
Throughout my career, I have leveraged AutoCAD Civil 3D to deliver accurate, standards-compliant drafting across several core civil and transportation disciplines: • Offsite & Transportation Plans (Commercial): Signage and striping plans, signal control plans, demolition plans, grading tie-ins, horizontal control plans, and notes and pole schedules. • Utility Plans (Commercial & Residential): Sewer, storm drainage, and water plan and profiles, as well as fire access plans. • Grading & Site Development (Commercial & Residential): Finished grade (FG) surfacing, existing/proposed (EG/FG) surface creation, ADA compliance plans, Stormwater Pollution Prevention Plans (SWPPP), and detention pond work. • Survey (Commercial & Residential): Survey plats, data collection and points processing, existing utility mapping, and legal descriptions and exhibits. • Oil & Gas Pipeline Infrastructure: Pipeline relocation and as-built plan and profile drawings, heavy haul and construction road layouts, tank and containment design, valve sites, pump station layout and design and facility expansions.
Vijaya P.
Horizontal Alignment Designer
Hyderabad, India
- GIS
- FEA
- Casting
- AutoCAD
- Drafting
- Detailing
- CAD Design
- CAD Drafting
- Geotechnical
- Detail Drawing
- Autodesk Revit
- Instrumentation
- Design Engineer
- Civil Engineering
- As-Built Drawings
- Design & Drafting
- Civil Engineering
- Engineering Drawing
- Structural Detailing
- Bentley Microstation
- General CAD Drafting
- Construction Drawings
- PDF to DWG Conversion
- Civil Drafting Services
CURRICULAM VITAE VIJAYAGOPAL. P Civil & Structural CADD Engineer. ?:▒▒▒▒▒▒▒▒▒▒▒▒▒ E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ To put myself in a globally reputed organization which motivates me by providin... Read more
CURRICULAM VITAE VIJAYAGOPAL. P Civil & Structural CADD Engineer. ?:▒▒▒▒▒▒▒▒▒▒▒▒▒ E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ To put myself in a globally reputed organization which motivates me by providing excellent opportunities and suitable environment where, I can apply my knowledge and skills, and to be a valuable asset in organization I work with to yield - both benefits of the job satisfaction as well as a steady-paced professional growth. PROFILE SUMMARY • A result oriented professional with more than 12.00 years of experience in complex structural drawings and detailing as well as on-site construction activities to ensure completion of project within the time & cost parameters and effective resource utilization to maximize the output • Adroit at swiftly ramping-up projects with competent cross-functional skills and ensuring on time deliverables • Acquired extensive experience of: • RCC Structures including preparation of Framing Layouts/General arrangement drawings, As-built drawings • Detailed Drawings For Raft Foundation, Columns, Beams, Slabs, Retaining Walls, Diaphragm Walls, Piles, Pile Caps, and Details Of Precast Columns, Precast Panels, Precast Slabs, Beams, Geotechnical Instrumentation Drawings & Calculation And Quantity Of Steels for reinforced Concrete and Bar Bending Schedule • Execute all type of R.C.C Drawings, mainly structural & various types of works, such as include drafting, checking, & preparing bar bending schedule with steel quantity using Base Of AutoCAD 2000 – 20016. EMPLOYMENT HISTORY Sr. CADD Engineer (Structures) September 2014 – August 2016 ArRiyadh New Mobility, CWG Group (Salini Impregilo, L&T & Nesma) at Riyadh. Project: ArRiyadh New Mobility (ANM) has been awarded a contract to design and build Line 3 which is the longest line at 41.2 km. Line 3 features 22 stations, including the Main Stations “Qasr Al-Hokm” and “Western”, 10.4 km of Bored and mined tunnel and 26.7 km of viaduct with maintenance depots at the west and east extremities. Client: ArRiyadh Development Authority (ADA) Responsabilités: • Preparation/review of span arrangement drawings for viaduct of various locations considering all aspects of site requirements for Line – 3. • Preparation of fabrication detail of Rebar jig for central pier segment of Continuous Span. Fabrication detailing of Rebar jig of center segment and expansion joint segment of Station Span. • Preparation of Erection scheme of launching girder for Straight and Curved spans. • Preparation of Bearing Installation & Bearing Pockets for all Spans. • Preparation of casting coordinates of segmental Box Girder for Casting yard purpose and giving global execution co-ordinates for all piers and spans (segments of box girder). • Preparation of Footing & Pier coordinates for Site and giving global co-ordinates for all piers and spans. • Preparation of numeration drawing for substructure and superstructure for viaduct and Station. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation for all type of Reinforcement drawings for substructure and superstructure for viaduct and Station. Sr. CAD Engineer (Structures) July 2011 – September 2014 PARSONS BRINCKERHOFF INDIA PVT.LTD, CHENNAI & HYDERABAD. Position: Engineering Consultant (Rail & Transit) Project : Chennai Metro Rail Client : GAMMON - MOSMETROSTROY JV Responsabilités: • Chennai Metro Rail Limited – CMRL UAA – 02 & UAA – 03 (Corridor – 2) Projects Consisting the Railway stations from Saidapet to Government Estate. • Worked on Detailed Design of Chennai Metro Rail Project Corridor-2. Responsable for the Preparations detailed structural drawings for entities of the underground stations like tunnel Drawings Diaphragm wall drawings and sections. Preparation of D-wall Reinforcement details and also concourse Slab, roof Reinforcement Detail Drawings and also my Process involves in preparing the project related Drawings with the specifications given by the Design team and developing drawings for the client. Responsabilités: • Preparation of span arrangements drawings for viaduct of various locations considering all aspects of site requirements for Corridor - 1 (Miyapur P.O.B to L.B Nagar P.O.E). • Preparation of numeration drawing for substructure and superstructure for viaduct and Station. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation for all type of Reinforcement drawings for substructure and superstructure for viaduct and Station. • Preparation of numeration drawing for substructure and superstructure for Cantilever Pier, Portal Pier and Obligatory Span Viaduct. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation of casting coordinates of segmental Box Girder for Casting yard purpose and giving global co-ordinates for all piers and spans (segments of box girder). • Preparation of Reinforcement drawings for Prestressed Concrete (PSC) Superstructure like segmental Box girders and substructure drawings of piers, pier caps, footing and Piles and pile caps. • Specialized In Cable Profiling Of Prestressed Box-Type Girders As Directed By Design Engineer. • Preparation of Bar Bending Schedules and Calculation of Quantities As Directed By Design Team. • Preparation of Pier Schedule for Viaduct and Station Piers. Co-Ordinates for Viaduct and Station Piers Foundation, Pedestal, Pier, Pier Cap & Bearing Pedestal. • Preparation of Seismic Arrestor for Viaduct and Station Piers. Details of Bearing Pedestal Numeration Details Viaduct and Stations. • Preparation of Shear Key Details for Superstructure for Viaduct and Station Piers. • CAD ENGINEER (Alignment) January 2011 – June 2011 FEEDBACK INFRASTRUCTURES Pvt. Ltd, HYDERABAD. Position: Engineering Consultant (Rail & Transit) Project : Hyderabad Metro Rail Limited, Client : L&T Metro Rail Ltd Responsabilités: • Assist Alignment Expert in design of Track Alignment (Horizontal & Vertical) for 3 Corridors (Total 72 kms) of Hyderabad metro Project using Bentley Rail Track and AutoCAD. • Drafting of Alignment 3 Corridors of Hyderabad metro Project based on design of Horizontal & Vertical. • Preparation of Cross Sections for all 3 Corridors of Hyderabad Metro Rail Project. • Assist in fixing of Turnouts and Crossovers along the proposed Corridors of Hyderabad Metro Rail Project. • Preparation of Power Supply Scheme Drawings for Hyderabad Metro Rail Project. • Designing / Preparation of Track Layout Plans for 3 Railway Depot Layouts of Hyderabad Metro Rail Project. • Setting of drafting standard and specifications for Hyderabad Metro Rail Project • Preparing the project related drawings with the specifications given by the Design team and developing drawings for the client. CADD Engineer (Bridge Structures) January 2010 – December 2010 EGIS INDIA CONSULTING ENGINEERS Pvt. Ltd, HYDERABAD. Position: Engineering Consultant (National Highways and Rail & Transit) Project : Chennai – Bangalore to Chennai Expressway Client – National Highway Authority of India Responsibilities: Preparation of GAD’s, which includes plans and sections of the structures, Highway Alignment, Strip Plans, Layouts, Reinforcement drawings as specified by the Design team. And also my Process involves in preparing the project related drawings with the specifications given by the Design team and developing drawings for the Client. Preparation of traffic engineering drawings as directed by design team. Civil Draughtsman (Building Structures) December 2007 – December2009 SAR PRO CONSULTING ENGINEERS, BANGALORE. Position : Engineering Consultant (Residential Apartment, Commercial complexes, Colleges & Industrial Buildings) Scope of Work : 2- 5 Floors Apartment, 2- Industrial Buildings, and 3-Engineering colleges. Responsibilities: Preparation of Structural drawings. Thorough knowledge of AutoCAD since 2004.Expert in CAD work for Structural detailing of residential buildings, commercial and industrial structures. I was worked on many type of Foundation Dwg. Like Raft-Foundation, Retaining Wall Detail, Lift-Pit Foundation Detail, etc. Efficiently led the team of STRUCTURAL DRAUGHTSMAN by visualizing the project requirements and capable of managing all crises to match the dead line. Good interpersonal skills to coordinate technical aspects within the team and with Architectural and other disciplines. Structural Draughtsman (Building Structures) October2004 to November 2007 SEMAC CONSULTING Pvt. Ltd AT BANGALORE. Position : Engineering Consultant Scope of Work : 3-Industrial, and 3-Public Buildings. STRENGTHS Aptitude to increase knowledge through continuous learning & Hardworking, Maintaining good relations with a friendly attitude, dedication towards a task once confided to complete with sincerity, punctuality and hard work. ACADEMIC CREDENTIALS ------------------------------------- • AMICE Civil Engineering - 2015 By Board of Technical Education. (fromInstitution of Civil Engineers India) PERSONAL DETAILS Father’s Name: Srinivasulu P. Date of birth: 25th December 1981 Current Address: #5, Ground Floor, 12th main, 14th cross, Wilson Garden, Bangalore – 5600301, Karnataka. Permanent Address : #26/831-3, Bangaraiah Kottal, Mittamadi, Proddatur, Kadapa (Dist) Andhra Pradesh-516360 Passport Details : No. N4670605 (Date of Issue: 12-NOV-2015 to Date of Expire: 11-NOV-2025). Gender: Male. Marital Status: Single. Number of Dependents: 4. Languages Known: Hindi, English, Kannada, Tamil. Software Skills : Autocad 2000-16, MS Office, BIM - Revit 2012 & 2014, ArmaCAD V8 & Bentley rail (Basic) AFFIRMATION Date: Place: VIJAYAGOPAL.P
Peter M.
Horizontal Alignment Designer
Lagos, Nigeria
- FEA
- API
- CAM
- Rigging
- AutoCAD
- Blender
- Drafting
- 3D Models
- Detailing
- Extrusion
- 3D Design
- 3D Artist
- Rendering
- PDF to DWG
- Elevations
- CAD Design
- 3D Modeling
- 2D Drafting
- Floor Plans
- 3D Drafting
- CAD Drawing
- 3D Rendering
- 3D Animation
- CAD Drafting
- Walkthroughs
- 3D Modeling
- Sketch to CAD
- Motion Design
- Solid Modeling
- Product Design
- CAD Conversion
- 3D Flythroughs
- 3D Logo Design
- Lighting Design
- Interior Design
- Building Design
- Post-Production
- Motion Graphics
- Exterior Design
- 3D Visualization
- Surface Modeling
- Product Designer
- Drafting Services
- 3D Rigging Design
- 3D Solid Modeling
- 2D to 3D Modeling
- Engineering Design
- Design Development
- Material Selection
- 3D Design Services
- 2D to 3D Conversion
- Product Development
- Mechanical Drafting
- Concept Development
- 3D Sculpting Design
- 3D Product Modeling
- Architectural Design
- 3D Product Animation
- 3D Scanning Services
- 3D Character Modeling
- Hard Surface Modeling
- Topology Optimization
- 3D Animation Services
- 3D Rendering Services
- Architectural Modeling
- Architectural Drafting
- Architectural Drawings
- 3D Presentation Design
- 3D Character Animation
- Architectural Animation
- Photorealistic Rendering
- 3D Architectural Modeling
- 3D Models of Machine Parts
- Architectural Visualization
- Blender 3D Modeling Services
- 3D Furniture Modeling Services
- 3D Character Modeling Services
Peter Maximus – Blender 3D Animation Expert | AutoCAD Drafter | Architectural Designer I am Peter Maximus, a multidisciplinary 3D Artist, Blender Animation Specialist, AutoCAD Drafter, and Architectu... Read more
Peter Maximus – Blender 3D Animation Expert | AutoCAD Drafter | Architectural Designer I am Peter Maximus, a multidisciplinary 3D Artist, Blender Animation Specialist, AutoCAD Drafter, and Architectural Designer whose work bridges the creative possibilities of three-dimensional visualization with the technical precision of computer-aided design and architectural development. My professional approach combines artistic creativity, geometric accuracy, spatial understanding, animation principles, and digital design technology to transform concepts into detailed, functional, and visually compelling digital creations. My services extend across Blender 3D modeling and animation, character creation, product visualization, mechanical and technical drafting, architectural planning, interior and exterior design, photorealistic rendering, and the development of comprehensive digital design presentations. I approach these disciplines as interconnected capabilities, using their combined strengths to solve design challenges and communicate complex ideas with clarity. What distinguishes my approach is the ability to work between creative visualization and technical documentation. A product concept may require precise dimensional drafting before it can become a realistic 3D model. An architectural project may begin as a two-dimensional floor plan before developing into a fully rendered environment. A character or digital object may require careful modeling, material development, rigging, and animation before it can communicate its intended personality or purpose. I understand these relationships and structure my workflow to support the complete development process. My objective is not simply to produce attractive renders, animated sequences, or technical drawings. It is to create digital assets and design solutions that are accurate, purposeful, professionally presented, and appropriate for their intended applications. Whether a client requires a detailed AutoCAD drawing, a Blender product animation, a three-dimensional architectural model, or a complete design visualization package, I approach every assignment with careful attention to its technical requirements, visual quality, and practical objectives. Blender 3D Modeling and Digital Asset Creation Three-dimensional modeling forms a central part of my creative practice. Using Blender, I develop digital objects, environments, architectural components, characters, and product representations that translate design concepts into fully realized three-dimensional forms. My modeling process begins with understanding the intended application of each asset. A model created for animation requires a different structural approach from one intended for an architectural presentation, product advertisement, engineering visualization, or static image. I consider these requirements before developing the geometry to ensure that the final asset supports its intended purpose. I work with fundamental geometric principles, polygonal modeling techniques, subdivision surfaces, modifiers, and precision transformation tools to construct models with appropriate proportions, organized topology, and consistent visual quality. Hard-surface modeling is particularly valuable for creating objects with defined mechanical or manufactured characteristics. Products, appliances, electronics, tools, equipment, furniture, and engineered components often contain complex combinations of curved and planar surfaces. I approach these models through controlled geometry, carefully constructed edges, accurate surface transitions, and realistic proportions. Organic modeling involves a different set of considerations. Characters, stylized objects, natural forms, and decorative elements require geometry that supports smooth surfaces, expressive silhouettes, and believable visual continuity. I pay attention to how models will respond to lighting, shading, and deformation. Clean geometry is important not only for appearance but also for rendering efficiency, animation performance, and future modifications. My Blender modeling capabilities encompass hard-surface modeling, polygonal and subdivision-surface modeling, character development, product modeling, furniture and interior asset creation, architectural modeling, mechanical component visualization, low-poly and high-poly modeling, surface refinement, topology optimization, UV mapping, texture preparation, and model cleanup. Every model is developed with attention to geometry, proportion, presentation quality, and the requirements of its intended use. Blender 3D Animation and Motion Design Animation gives digital objects the ability to communicate through movement. It transforms static geometry into visual sequences capable of demonstrating product functionality, explaining technical processes, creating memorable advertising content, and bringing characters or environments to life. My Blender animation work focuses on combining movement, timing, composition, and visual storytelling to produce sequences that communicate clearly and maintain the viewer's attention. Before developing an animation, I identify its central objective. Some projects require realistic mechanical motion. Others benefit from stylized movement, cinematic camera work, or carefully choreographed product reveals. The animation strategy must support the message being communicated. I work with keyframe animation, transformation controls, interpolation, animation curves, and Blender's timeline and Graph Editor to develop motion with appropriate acceleration, deceleration, timing, and spatial relationships. Motion is not simply the movement of an object between two positions. Its quality depends on how that object begins moving, changes direction, interacts with its environment, and comes to rest. For product animations, I develop controlled camera movements, object rotations, assembly sequences, and visual transitions that reveal important design details. For architectural projects, I create camera paths that guide viewers through rooms, corridors, exterior spaces, and building environments. Technical animations may demonstrate the operation of components or explain how different parts fit together. These sequences demand particular attention to movement accuracy, sequencing, and clarity. My animation services include product animations, object motion, camera animation, architectural walkthroughs, exploded-view presentations, assembly demonstrations, looping animations, motion graphics, and animated digital scenes. Where appropriate, I incorporate lighting transitions, material changes, object visibility controls, and synchronized scene elements to reinforce the animation's visual narrative. The goal is to produce motion that feels intentional, polished, and suitable for the client's presentation, advertising, or communication requirements. 3D Character Modeling and Character Animation Character design is one of the most expressive applications of three-dimensional art. It combines anatomy, proportion, personality, visual storytelling, and digital craftsmanship to create characters capable of communicating recognizable identities and emotions. My character modeling process begins with the character's intended role and visual style. A stylized mascot designed for advertising may prioritize distinctive shapes, exaggerated features, and approachable expressions. A realistic digital character demands closer attention to anatomical proportions, surface detail, and material behavior. I develop character models by studying silhouettes, facial proportions, body structure, and the relationship between individual features. These elements establish the character's visual identity before materials, clothing, and additional details are introduced. Facial modeling receives particular attention because relatively small adjustments to the eyes, eyebrows, nose, mouth, or jawline can significantly influence the character's appearance and expression. For stylized characters, I explore proportion and shape language to develop memorable designs. Larger heads, simplified facial structures, exaggerated hands, and carefully controlled body proportions may be used when appropriate to the project's visual direction. Character topology is also important, particularly when the model will be animated. Geometry around the face, shoulders, elbows, knees, and other joints must be arranged to support movement and reduce unwanted deformation. My character workflow may include modeling, retopology, UV mapping, material development, rigging preparation, basic facial expression controls, posing, and animation. Where a project requires character movement, I consider body mechanics, weight distribution, balance, and timing to create poses and motion that support the character's personality. I also develop presentation renders that showcase characters from multiple angles, including front, side, three-quarter, and perspective views. These capabilities are applicable to advertising mascots, animated presentations, digital storytelling, stylized avatars, character concept visualization, and promotional content. Product Design Visualization and Commercial 3D Rendering Product visualization is an essential part of modern product development, advertising, e-commerce, and brand communication. I use Blender to create detailed three-dimensional representations of products that allow businesses, manufacturers, designers, and marketing teams to present their ideas with clarity and visual impact. My product visualization workflow begins with the physical characteristics of the object. I study its dimensions, shape, material composition, surface finishes, functional features, and branding requirements. When reference photographs, sketches, CAD drawings, or dimensional specifications are available, I use them to guide the development of the model. A successful product render must communicate more than an attractive appearance. It should accurately represent the product's form while emphasizing the details that make it distinctive. I work with materials such as plastic, glass, metal, rubber, wood, fabric, ceramic, and painted surfaces, considering their individual reflective and optical properties. Lighting is equally important. A reflective metal surface requires a different lighting arrangement from a transparent glass container or a matte plastic object. I develop lighting setups that reveal product contours, communicate surface quality, and establish the desired presentation style. My product visualization services can support cosmetics, consumer electronics, household products, furniture, packaging, industrial equipment, accessories, and manufactured components. I create clean studio renders, product close-ups, multiple-angle presentations, exploded views, and cinematic product scenes. For commercial projects, I can develop animated product reveals, rotating product showcases, assembly demonstrations, and short promotional sequences. The result is a visual representation that helps clients communicate their products to prospective customers, investors, manufacturing partners, or internal design teams. Materials, Texturing, Shading, and Surface Development The realism and visual character of a 3D model depend heavily on the quality of its materials and surface treatment. Geometry establishes an object's shape, but materials determine how that shape interacts with light and how viewers perceive its physical qualities. Using Blender's material and shader systems, I develop surfaces that reflect the visual properties of real-world materials or support a deliberately stylized artistic direction. My material development process considers base color, roughness, metallic response, transparency, surface texture, normal information, and environmental lighting. For photorealistic projects, I use physically based rendering principles to create plausible material behavior. Metal should exhibit appropriate reflectivity, glass should communicate transparency and refraction, and textured surfaces should respond to lighting in a way that reveals their physical characteristics. Surface imperfections are also an important consideration. Completely uniform materials can appear artificial, particularly in close-up renders. Subtle roughness variations, texture differences, and carefully controlled imperfections may improve realism without distracting from the design. For stylized projects, I use materials to support a specific visual identity rather than simply imitate physical reality. Color relationships, surface simplicity, and exaggerated material responses can contribute to a distinctive artistic style. My workflow includes UV mapping, texture placement, procedural material development, shader adjustments, bump and normal mapping, and material organization. I also consider consistency across scenes and assets, ensuring that materials work together visually and support the overall presentation. Photorealistic Rendering, Lighting, and Visual Composition Rendering is where technical model development and artistic presentation converge. I use Blender's rendering environment to transform three-dimensional scenes into finished images and animation sequences with carefully controlled lighting, materials, composition, and visual atmosphere. My workflow incorporates both Cycles and Eevee, selecting the rendering approach according to the project's visual objectives, complexity, performance requirements, and delivery expectations. Cycles supports physically based lighting and realistic material interactions, making it valuable for architectural visualization, product presentation, and scenes where accurate reflections and light behavior are important. Eevee offers efficient rendering capabilities that can be advantageous for rapid previews, stylized scenes, and animation workflows. Lighting design is central to my process. I consider the direction, intensity, color, and relative size of light sources, as well as their interaction with the geometry and materials in a scene. A product may require a studio lighting arrangement that emphasizes its silhouette and surface finish. An interior architectural scene may benefit from a combination of natural daylight and artificial illumination. A cinematic animation may require dramatic contrasts and carefully positioned highlights to direct the viewer's attention. Composition receives the same level of consideration. Camera placement, focal length, framing, perspective, and depth of field all influence how viewers interpret a design. I develop rendering compositions that prioritize the subject, preserve visual clarity, and support the project's intended message. Post-production adjustments may include color correction, exposure refinement, contrast management, compositing, and final image preparation. My objective is to produce renders that communicate material quality, spatial depth, dimensional accuracy, and professional visual presentation. AutoCAD 2D Drafting and Technical Drawing Technical drafting is a distinct but complementary part of my professional practice. As an AutoCAD Drafter, I develop precise two-dimensional drawings that translate design information into organized documentation suitable for technical review, design development, coordination, and construction-related applications. AutoCAD drafting requires a disciplined approach to measurement, geometry, annotation, drawing organization, and technical communication. I begin by studying the available source information, including sketches, reference drawings, dimensions, specifications, and project requirements. From this information, I construct drawings using accurate coordinates, drawing units, geometric relationships, and controlled drafting methods. My drafting workflow includes linework development, layer management, object properties, dimensioning, text annotation, blocks, hatching, and drawing sheet preparation. Layer organization is particularly important because technical drawings often contain several overlapping categories of information. Separating walls, doors, windows, furniture, dimensions, centerlines, reference geometry, and other elements improves readability and supports efficient editing. I develop drawings that communicate information clearly, avoiding unnecessary linework, inconsistent annotations, or confusing layouts. My AutoCAD drafting capabilities encompass architectural floor plans, building elevations and sections, site and layout plans, furniture and interior layouts, roof plans, reflected ceiling plans, technical detailing, mechanical component drawings, orthographic projections, sketch-to-CAD conversion, PDF-to-DWG redrawing, existing drawing cleanup, and drawing sheet preparation. I understand that a technically accurate drawing must also be easy for other professionals to interpret. For this reason, I give attention to drawing hierarchy, lineweights, scale, dimension styles, annotation clarity, and organized presentation. AutoCAD 3D Drafting and Technical Modeling Beyond two-dimensional drafting, AutoCAD provides tools for developing three-dimensional representations of designed objects and technical components. I approach 3D drafting as a method of exploring geometry, evaluating spatial relationships, and communicating the physical form of technical designs. My 3D CAD workflow begins with establishing reliable dimensions and geometric constraints. I develop forms using solid modeling operations, surface construction, extrusion, revolution, Boolean operations, and other suitable modeling techniques. Technical models may represent architectural elements, manufactured objects, mechanical components, assemblies, or conceptual products. Unlike purely artistic modeling, CAD-based modeling often places greater emphasis on dimensional consistency, measurable geometry, and the relationship between individual components. I consider these requirements throughout the modeling process. For clients working between AutoCAD and Blender, I can structure projects so that CAD drawings provide the dimensional reference for subsequent visualization work. This combination makes it possible to move from a technical concept toward a more visually engaging presentation without losing the relationship between the original geometry and its intended appearance. Depending on the project, deliverables may include three-dimensional CAD geometry, orthographic drawings, perspective views, annotated layouts, and models prepared for further development in compatible software. Mechanical Drafting and Engineering Design Visualization Mechanical drafting requires careful attention to dimensions, component relationships, manufacturing geometry, and the conventions used to communicate technical information. My mechanical drafting services focus on translating supplied engineering concepts, sketches, and specifications into clear technical drawings and three-dimensional representations. I work with geometric forms commonly found in mechanical parts, equipment, fabricated components, and product assemblies. These may include plates, brackets, housings, shafts, flanges, frames, enclosures, mounting structures, and other manufactured elements. I consider the practical relationships between features such as holes, slots, edges, surfaces, fasteners, and connecting components. Mechanical drawings may require orthographic projections, sectional views, detailed dimensions, centerlines, and annotations that clarify the geometry of the object. Where tolerances, fits, or manufacturing specifications are provided, I incorporate the relevant information into the documentation. I also use 3D visualization to communicate how components relate to one another. An exploded assembly view can help a client understand the arrangement of parts, while an animated assembly sequence can demonstrate a proposed installation or operating process. My role is to translate established technical requirements into accurate and accessible drafting and visualization deliverables. Engineering calculations, formal design certification, and safety-critical approvals remain the responsibility of appropriately qualified professionals. Architectural Concept Development and Building Design Architecture brings together spatial planning, visual composition, construction considerations, environmental context, and human experience. As an Architectural Designer, I approach projects by examining how a building should function, how it should relate to its surroundings, and how its form can communicate the client's intended character. Every architectural project begins with a set of requirements. These may include the type of building, available site dimensions, proposed room arrangements, architectural style, budget considerations, environmental conditions, and the intended use of the spaces. I organize this information into a design direction that establishes the foundation for further development. My concept development process includes preliminary massing, spatial arrangement, building orientation, facade composition, roof form exploration, and the relationship between interior and exterior spaces. I consider the balance between aesthetics and functionality. A visually impressive building must still provide practical circulation, appropriately sized rooms, effective access, and a coherent spatial organization. Architectural proportions are another important consideration. The relationship between building height, width, openings, projections, and material surfaces influences the overall appearance of a structure. I explore these relationships through sketches, CAD drawings, and three-dimensional models. My architectural design services can support residential houses, duplexes, apartments, villas, commercial premises, offices, retail buildings, and other building concepts appropriate to the project brief. Each design is developed in response to the client's requirements rather than relying on an identical visual formula. Architectural Floor Planning and Space Optimization Floor planning is one of the most important stages of architectural development because it determines how a building will function in daily use. My planning process focuses on organizing spaces into layouts that support movement, privacy, accessibility, comfort, and efficient use of available area. I begin by identifying the required rooms and the relationships between them. In residential projects, this may involve coordinating living areas, dining spaces, kitchens, bedrooms, bathrooms, staircases, corridors, storage, and outdoor connections. For commercial projects, planning may involve workspaces, reception areas, meeting rooms, customer circulation, service zones, and operational support areas. I consider the practical dimensions of rooms and the clearance required around furniture, doors, fixtures, and circulation routes. The positioning of doors and windows is assessed not only for visual balance but also for accessibility, natural lighting, ventilation, and the effective use of interior walls. Circulation is especially important. Poorly arranged spaces can create unnecessary movement, wasted floor area, and inconvenient transitions between rooms. I work to develop layouts that are logical, comfortable, and appropriate to the intended occupants. Floor plans are presented with clearly defined walls, openings, dimensions, room labels, and relevant architectural symbols. Where necessary, I develop alternative arrangements to help clients compare different spatial solutions before selecting a final direction. Architectural Drafting and Construction Documentation Architectural drawings provide the technical language through which building concepts are communicated to designers, consultants, contractors, and other project participants. Using AutoCAD, I develop architectural documentation that translates design ideas into clearly organized drawings. My drafting scope includes site plans, floor plans, elevations, sections, roof plans, reflected ceiling plans, door and window layouts, and selected construction details. Floor plans communicate the horizontal arrangement of spaces, while elevations establish the building's exterior appearance. Sections provide information about vertical relationships, including ceiling heights, floor levels, roof arrangements, and the connection between building elements. Roof plans may illustrate roof geometry, slopes, drainage directions, and related components. Detailed drawings provide additional clarity where general plans are insufficient to explain how particular elements relate to one another. I also prepare drawing layouts with appropriate scales, labels, dimension styles, annotations, and title blocks. Drawing consistency is an important part of this process. Changes made to one drawing must be reviewed against related views to reduce contradictory information. For existing projects, I can assist with revisions, redrawing, formatting, and the development of documentation from supplied reference materials. Construction documents are prepared within the agreed drafting scope and should be reviewed or approved by the relevant licensed professionals wherever required by local regulations. 3D Architectural Modeling and Building Visualization Three-dimensional architectural modeling allows a building to be understood beyond the limitations of conventional plans and elevations. I use Blender to transform architectural concepts and AutoCAD drawings into digital building models that communicate form, scale, spatial organization, and material characteristics. My workflow begins with the available design information, including floor plans, elevations, dimensions, roof configurations, and reference photographs. I construct the building's primary geometry, establishing walls, floors, openings, roofs, balconies, stairs, and other architectural features. Once the primary structure is represented, I develop secondary elements such as facade details, window frames, doors, railings, exterior fixtures, and surrounding site components. Model accuracy is especially important when the visualization must correspond closely to technical drawings. I pay attention to architectural dimensions, relative proportions, and the alignment of building elements. For exterior visualization, I consider the surrounding environment and how the building is positioned within its site. For interior visualization, I develop the spatial character of rooms through furniture placement, materials, lighting, and decorative elements. These models provide the foundation for high-quality architectural renders, walkthrough animations, design presentations, and future design revisions. Interior Design and 3D Interior Visualization Interior spaces require careful coordination of layout, materials, lighting, furniture, and visual atmosphere. My interior design and visualization services help clients explore how a space can be organized and how different design decisions will appear before physical implementation. I begin by studying the dimensions of the space, its intended function, and the client's preferred design direction. Furniture arrangements are developed to support practical movement and comfortable use. I consider how the scale of furniture relates to the room, how circulation paths remain unobstructed, and how the placement of major elements influences the overall experience. Material choices are then explored to establish the space's visual character. Floor finishes, wall treatments, ceilings, cabinetry, upholstery, decorative surfaces, and lighting fixtures all contribute to the final composition. I use Blender to develop interior scenes that communicate these relationships in three dimensions. My interior visualization work can cover living rooms, bedrooms, kitchens, bathrooms, dining areas, offices, reception spaces, retail interiors, and other environments. Lighting is developed to support both realism and atmosphere. Natural daylight may be used to communicate openness and room proportions, while artificial lighting can establish a particular mood or emphasize important design features. I produce interior renders from carefully selected camera positions that reveal the room's arrangement and important architectural details. These visualizations help clients evaluate design ideas, compare finishes, and communicate their preferred direction to other project participants. Exterior Architectural Design and Facade Visualization The exterior of a building communicates its architectural identity and establishes its relationship with the surrounding environment. My exterior design work focuses on creating balanced building compositions through proportion, material selection, geometry, and the arrangement of architectural elements. I consider the relationship between walls, windows, entrances, rooflines, balconies, projections, and decorative features. A successful facade should appear coherent from multiple viewpoints, not only from a single presentation angle. I explore contemporary, minimalist, modern, and other architectural styles according to the client's preferences and the building's intended use. Material selection plays an important role in defining the exterior character. Rendered surfaces, masonry, timber finishes, metal panels, glass, stone, and other materials can be combined to establish contrast, rhythm, and visual depth. Using Blender, I create exterior models and renders that communicate these design decisions. I also develop surrounding visual context where appropriate, including walkways, driveways, boundary walls, planting, outdoor furniture, and environmental details. Lighting conditions can be adjusted to demonstrate how a building appears during daylight, sunset, or nighttime. My exterior visualization services are useful for property presentations, residential developments, commercial building concepts, client design reviews, and architectural marketing materials. Architectural Walkthroughs and Flythrough Animation Architectural animation provides a more immersive way to communicate a building than static drawings or still images alone. I create walkthrough and flythrough animations that guide viewers through designed environments and reveal the relationship between spaces. A walkthrough is typically developed from a viewpoint that approximates a person moving through the building. This approach helps clients understand room sequences, circulation routes, spatial proportions, interior finishes, and the overall experience of the design. Flythrough animations provide greater flexibility in camera movement. They may begin with an exterior overview, move toward the building, pass through significant architectural spaces, or reveal the project from elevated perspectives. I plan these animations by identifying the most important spaces and viewpoints. Camera paths are developed to communicate the project clearly rather than simply moving through the model without purpose. I consider camera speed, turning movements, framing, transitions, and the duration of each shot. Lighting and material consistency are maintained throughout the sequence to create a unified presentation. Architectural animations can be particularly valuable for real estate marketing, property development proposals, design presentations, and client approvals. They allow viewers to develop an understanding of a project before construction begins. Furniture, Fixtures, and Custom 3D Object Modeling Furniture and architectural fixtures form an important connection between product design and interior visualization. I create three-dimensional representations of furniture, decorative objects, fittings, and custom architectural components for design presentations and digital environments. My workflow begins with the intended dimensions, visual style, and construction characteristics of the object. Furniture models may include chairs, tables, sofas, beds, cabinets, desks, shelving units, storage systems, and decorative installations. I examine the relationship between structural components, proportions, surface details, and material finishes. Hard-surface modeling techniques are applied to develop controlled geometry, while subdivision tools are used where smooth curvature is required. For upholstered furniture, I consider surface softness, cushion volume, seams, and material characteristics. Wooden or metal furniture may require more attention to joints, frame construction, edge treatment, and reflective behavior. These assets can be used independently in product presentations or incorporated into larger interior and architectural scenes. 2D to 3D Conversion and Design Reconstruction Many clients begin with an idea represented through sketches, photographs, existing floor plans, PDF drawings, or incomplete design references. I assist with converting these materials into organized digital drawings and three-dimensional models. The conversion process begins with evaluating the source information and identifying which dimensions, proportions, and design details are available. Where reliable measurements are supplied, I use them to establish the geometry of the model. For architectural projects, a two-dimensional floor plan can serve as the foundation for constructing walls, openings, floors, roofs, and interior spaces in Blender. For products or mechanical objects, orthographic sketches and technical drawings can provide the reference needed to reconstruct a three-dimensional representation. The accuracy of the final model depends on the quality and completeness of the source material. Where information is missing, I identify the assumptions that require confirmation rather than presenting estimated geometry as verified dimensional information. This service supports design development, digital archiving, product visualization, architectural presentations, and the modernization of existing drawing records. CAD Drawing Conversion, Cleanup, and Revision Existing technical drawings sometimes require correction, organization, modernization, or conversion into editable formats. I provide drafting support for clients who need their existing design information prepared for further development. This may involve redrawing scanned plans, converting PDF references into AutoCAD geometry, correcting dimensions, reorganizing layers, removing duplicated lines, or improving annotation consistency. I also work on revisions to existing architectural or technical drawings based on updated client instructions. Drawing cleanup requires careful attention because small drafting inconsistencies can create problems when files are reused or shared. Overlapping lines, disconnected geometry, inconsistent layer assignments, incorrect scales, and unnecessary blocks can make a drawing difficult to edit. I approach these issues systematically, improving the organization and usability of the drawing while preserving its intended design information. Final deliverables can be prepared in the agreed CAD and drawing exchange formats. Technical Animation and Exploded-View Visualization Complex objects and assemblies are often difficult to understand through conventional still images. Technical animation provides an effective way to explain how different components relate to one another, how an assembly is constructed, or how a proposed mechanism is intended to operate. Using Blender, I develop animated sequences that separate, position, rotate, or assemble digital components in a controlled and understandable manner. Exploded views are particularly useful because they reveal the internal arrangement of an object without requiring the viewer to interpret several overlapping parts simultaneously. I consider the order of movement, spacing between components, camera positioning, and visual emphasis. Animation sequences may be supported by labels, arrows, highlighted components, or other explanatory elements when required by the project. The underlying movement is developed from the supplied design information and intended operating principles. Technical visualization can support equipment presentations, product demonstrations, training materials, concept explanations, and marketing communication. My focus is on visual clarity and accurate representation of the provided design, rather than independently certifying the mechanical performance of the system. 3D Advertising, Brand Visualization, and Promotional Animation Three-dimensional content has become an important tool for brands that want to present products and ideas in distinctive visual formats. I create 3D scenes and animations intended to communicate product features, support brand identity, and make commercial presentations more visually engaging. My advertising workflow begins by understanding the product, the intended audience, and the message the client wants to communicate. A premium product campaign may require restrained lighting, elegant camera movements, and carefully controlled reflections. A playful consumer brand may benefit from vibrant colors, stylized objects, expressive motion, and dynamic transitions. I adapt the visual direction to the product and the brand rather than applying the same style to every project. My commercial visualization services can include animated product introductions, rotating product displays, product feature presentations, packaging visualization, branded 3D compositions, and short promotional sequences. I also consider the intended publishing format. Content designed for a website may require a different composition from content intended for a vertical social media advertisement or a widescreen commercial presentation. Camera framing, subject positioning, image resolution, and animation duration are planned around the selected output. The goal is to create visual assets that communicate a product's value while maintaining a professional and recognizable brand presentation. Scene Composition and Digital Environment Development A 3D asset rarely exists in complete isolation. Its surroundings influence how viewers understand its size, materials, purpose, and visual character. I develop digital environments that provide suitable context for products, characters, architectural models, and animated scenes. Environment creation involves organizing the spatial relationships between objects, backgrounds, lighting sources, and camera viewpoints. For architectural scenes, I consider terrain, exterior surfaces, vegetation, surrounding objects, and environmental lighting. For product presentations, the environment may be deliberately minimal, using a studio backdrop and controlled reflections to keep attention on the main subject. For character animation or storytelling, the environment may require additional props, surfaces, and background elements to establish the setting. I aim to create scenes that are visually coherent and efficient to render. This involves managing object complexity, using appropriate material detail, organizing collections, and avoiding unnecessary geometry that does not contribute meaningfully to the final presentation. Camera Animation and Cinematic Visual Storytelling Camera movement plays an important role in determining how a viewer experiences a 3D scene. I approach camera animation as a form of visual communication, using movement and framing to direct attention toward important features. Camera paths may include controlled tracking movements, orbiting shots, close-up transitions, overhead views, perspective reveals, and guided walkthroughs. Each movement serves a specific purpose. For example, an orbiting camera can communicate the overall shape of a product. A close-up can reveal surface details or functional features. A wide architectural shot can establish the relationship between a building and its environment. I consider focal length, camera height, depth of field, movement speed, and visual continuity. Abrupt camera movements are avoided unless they deliberately support the intended presentation style. For longer sequences, I organize shots to create a logical progression from general views to detailed information. This approach helps make visual presentations easier to follow and more engaging. Design Accuracy, Quality Control, and File Organization Professional digital design requires more than creativity and technical software knowledge. It also requires an organized workflow and consistent quality control. I approach every project with attention to file structure, naming conventions, dimensional consistency, scene organization, and revision management. For AutoCAD projects, I review drawing units, geometry, dimensions, layers, annotations, scales, and plotting requirements. For Blender modeling projects, I inspect geometry, normals, material assignments, object transforms, topology, and overall scene organization. For animation projects, I review timing, camera movement, object behavior, lighting consistency, and final rendered output. I also consider how the client may need to use the files after delivery. A project intended for continued editing should be organized differently from one that only requires a final rendered image or video. Where editable native files are part of the agreed deliverables, I prepare them with attention to structure and usability. Clear file organization supports collaboration, reduces confusion, and makes future revisions more efficient. Client Collaboration and Project Development Successful freelance projects depend on communication as much as technical ability. I begin assignments by establishing a clear understanding of the client's requirements, available references, expected deliverables, preferred format, and project priorities. I believe that the most efficient way to approach a design challenge is to resolve important questions early rather than make assumptions that may lead to avoidable revisions. For Blender projects, this may involve discussing visual style, model complexity, animation length, camera direction, and rendering expectations. For AutoCAD assignments, it may involve confirming drawing units, dimensions, scales, source references, and annotation requirements. For architectural projects, it may involve understanding site conditions, spatial requirements, preferred design styles, and the extent of technical documentation needed. I structure projects around clearly defined stages where appropriate. These stages may include reference review, concept development, modeling or drafting, preliminary presentation, revisions, and final delivery. Feedback is incorporated into the design process with attention to the original project requirements. I aim to ensure that clients understand what is being developed, which decisions require their approval, and how the final deliverables will support their objectives. Software Expertise and Digital Workflow My professional services are centered on two primary digital design platforms: Blender and AutoCAD. Blender supports my three-dimensional creative work, including modeling, character development, animation, material creation, lighting, scene construction, architectural visualization, and rendering. Its integrated toolset allows different stages of 3D production to be developed within a coordinated environment. I work with Blender's modeling tools, modifier systems, shader editor, keyframe animation controls, Graph Editor, camera systems, and rendering engines. AutoCAD supports my technical drafting and computer-aided design work. I use its drafting environment to construct precise two-dimensional geometry, organize technical information, annotate drawings, develop layouts, and prepare design documents. The integration of these two platforms provides an important advantage. AutoCAD can establish dimensional clarity, while Blender can communicate the resulting design through realistic materials, lighting, animation, and perspective visualization. This workflow is especially useful when projects require both technically organized source drawings and visually compelling presentations. I select techniques according to the requirements of each assignment, keeping the focus on the suitability and quality of the final deliverable rather than software complexity alone. Professional Specializations and Project Applications My work supports clients across several areas of design, architecture, visualization, and digital content production. Architectural and Real Estate Projects I develop architectural drawings, building models, exterior renders, interior visualizations, and walkthrough animations that help communicate proposed spaces and developments. Product Design and Consumer Goods I create product models, packaging visualizations, studio renders, animated product showcases, and promotional presentations. 3D Character and Digital Content Development I work on stylized character models, digital avatars, animated objects, visual storytelling assets, and character presentation renders. Mechanical and Technical Design I prepare CAD drawings, three-dimensional component representations, assembly visualizations, and explanatory technical animations based on supplied design information. Interior Design and Furniture Visualization I create digital representations of rooms, furniture, fixtures, finishes, and interior arrangements that support design evaluation and presentation. Advertising and Commercial Visual Content I develop 3D imagery and animations intended for marketing campaigns, digital advertisements, websites, and product promotions. Although these applications differ in their objectives, they share common requirements: clear communication, technical consistency, suitable visual quality, and attention to the client's instructions. My Approach to Professional Design I organize my professional practice around three complementary disciplines: creative 3D production, technical CAD drafting, and architectural design. Each contributes a different form of value. Blender enables me to visualize ideas, explore geometry, develop animated sequences, and present designs through realistic or stylized digital imagery. AutoCAD provides the precision required to communicate dimensions, geometric relationships, and technical design information. Architectural design brings these tools together through spatial planning, form development, functionality, and the understanding of how people interact with designed environments. My approach is based on the principle that effective design should be both visually understandable and technically purposeful. A model should be constructed with attention to its intended use. A drawing should communicate information accurately. An animation should make its subject easier to understand. An architectural design should consider how spaces function, not simply how they appear in a render. I also recognize that different clients require different levels of service. Some assignments involve creating a single object from a reference image. Others require detailed CAD drawings, multiple architectural views, character modeling, or complete rendered animation sequences. I adapt the workflow and deliverables to the project scope while maintaining consistent attention to quality, organization, and communication. Why Clients Work With Me Clients seeking Blender 3D modeling, 3D animation, AutoCAD drafting, or architectural visualization often need more than someone who can operate the relevant software. They need a freelancer who can interpret project requirements, understand the relationship between technical and visual information, and produce deliverables that serve a practical purpose. My multidisciplinary approach allows me to understand how different design stages relate to one another. An architectural drawing can inform a three-dimensional building model. A product sketch can become an organized digital object. A mechanical assembly can be presented through an explanatory animation. A simple design concept can be developed into a polished visual presentation. I approach this work with a focus on clear understanding of the client's requirements, accurate geometry, professional modeling and rendering, organized CAD documentation, thoughtful architectural planning, purposeful animation, consistent communication, structured revisions, and practical final deliverables. I value design processes that are transparent, collaborative, and focused on producing work that clients can use confidently. Professional Commitment My commitment is to provide 3D design, animation, CAD drafting, and architectural visualization services that combine creativity with discipline. I understand that every design carries expectations. A client investing in architectural drawings expects clarity and accuracy. A product designer needs a model that represents the intended object. A business commissioning an animation wants visual content that communicates its message effectively. These expectations shape the way I approach my work. I give attention to the initial brief, the development process, the presentation of design options, and the preparation of final files. I also recognize the importance of working within the limits of the supplied information and agreed professional scope. Where specialist engineering calculations, statutory approvals, or licensed architectural sign-offs are required, those responsibilities must be handled by appropriately qualified professionals. My role is to contribute dependable drafting, design development, three-dimensional production, and visualization expertise to the assignments entrusted to me. Final Statement My professional identity is built around the integration of three disciplines: Blender 3D Modeling and Animation, AutoCAD Drafting, and Architectural Design. Together, these capabilities allow me to work across a broad range of creative and technical projects, from individual digital assets and mechanical drawings to architectural environments and animated visual presentations. I understand that successful design must satisfy more than one requirement. It should communicate the original idea, respect relevant technical constraints, maintain visual quality, and provide practical value to the client. That is the standard I aim to bring to every project. Whether you need a character brought to life through animation, a product presented through realistic 3D imagery, an architectural concept developed into a digital environment, or technical information translated into clear AutoCAD drawings, my objective remains the same: to provide carefully developed work that meets your requirements and communicates your vision effectively. I am Peter Maximus Blender 3D Animation Expert, AutoCAD Drafter, and Architectural Designer. I transform concepts into precise drawings, detailed 3D models, compelling animations, and professionally presented architectural designs.
Prathamesh J.
Horizontal Alignment Designer
Mumbai, India
- Blender
- Unity 3D
- CAD Design
- 3D Modeling
- Logo Design
- Game Design
- Unreal Engine
- 3D Logo Design
- Substance Painter
- 3D Architectural Modeling
- Blender 3D Modeling Services
Experienced in Blender, Unity engine and unreal Engine. If you want anything rendered or Modelled or even want a specific logo designed in 3D then welcome to my profile. Keeping it short and simple. Y... Read more
Experienced in Blender, Unity engine and unreal Engine. If you want anything rendered or Modelled or even want a specific logo designed in 3D then welcome to my profile. Keeping it short and simple. You can also mail me through ▒▒▒▒▒.
Ispat R.
Horizontal Alignment Designer
Bengaluru, India
- AutoCAD
- 3ds Max
- Drafting
- CAD Design
- SolidWorks
- Home Design
- General Design
- Master Planning
- Hourly Services
- Structure Design
- Landscape Design
- Design & Drafting
- Floor Plan Design
- AutoCAD Electrical
- Commercial Drafting
- Project Coordination
- General CAD Drafting
- CAD Drawing Services
- PDF to DWG Conversion
- PDF to CAD Conversion
- 2D CAD Design Services
- AutoCAD Design Services
- ArchiCAD Design Services
- 2D CAD Drafting Services
- AutoCAD Drawing Services
- Architectural Site Plans
- AutoCAD Drafting & Design
- Contract Drafting Services
- Architectural Model Making
- Project Management Engineer
- AutoCAD Conversion Services
- Drafting and Design Services
- Architectural Drafting Services
- Architectural Planning and Design
Full Stack CAD designing and drafting Security Infrastructure designing using CPTED Six Sigma & certified project manager capable of project risk evaluation A self motivated individual and can work i... Read more
Full Stack CAD designing and drafting Security Infrastructure designing using CPTED Six Sigma & certified project manager capable of project risk evaluation A self motivated individual and can work independently
Jon W.
Horizontal Alignment Designer
Port Angeles, United States
- AutoCAD
- Drafting
- CAD Design
- DraftSight
- SolidWorks
- 3D Modeling
- Shop Drawings
- 3D CAD Modeling
- Industrial Design
- Parts to 3D Model
- 2D to 3D Modeling
- Sheet Metal Design
- Production Planning
- Press Brake planning
- Part-to-CAD Modeling
- 2d to 3D CAD Modeling
- PDF to CAD Conversion
- SolidWorks Professional
- Autodesk Fusion 360 CAD
- Steel Fabrication Design
- SolidWorks Design Services
- 3D Models of Machine Parts
- Steel Shop Drawing Services
- Fabrication Drawings Services
- Design for Additive Manufacturing
Solidworks/Fusion360/Autocad. 15 years inhouse parts production manager at Lincoln Industrial Corporation, an internationally distributed log truck/industrial trailer/dump truck mfgr., experienced in... Read more
Solidworks/Fusion360/Autocad. 15 years inhouse parts production manager at Lincoln Industrial Corporation, an internationally distributed log truck/industrial trailer/dump truck mfgr., experienced in guiding production fabrication enterprise with CAD by assessing production needs and diving into assembly models for DXFs and shop drawings to power CNC cutting, pressbrake operations, and assembly. Also frequently scratch-modeled/reverse engineered parts and assemblies from broken physical examples or customer sketches to supply jobber replacement parts and structural steel to local industrial concerns and construction companies. Earned CSWA late 2025. Currently own/operate 3Design CAD, LLC, a 3D/2D industrial design/drafting and fabrication consultation provider doing business locally in the Puget Sound area and nationally online.
Yasmeen V.
Horizontal Alignment Designer
Hyderabad, India
- AutoCAD
- SketchUp
- 3D Models
- Elevations
- CAD Design
- 2D Drawing
- 2D AutoCAD
- 3D Modeling
- Floor Plans
- 3D Rendering
- Interior Design
- Design & Drafting
- 2D to 3D Modeling
- 3D House Rendering
- 2D AutoCAD drafting
- 3D Rendering Services
- PDF to DWG Conversion
- 3D Interior Rendering
- 3D Exterior Rendering
- PDF to CAD Conversion
- 2D CAD Drafting Services
- 2D Drawings and Floor Plans
- Architectural Drafting Services
I’m an interior designer with a strong background in creating 2D drawings in AutoCAD and 3D models in SketchUp, along with good-quality 3D renders. I hold a Bachelor’s degree in Interior Design and ha... Read more
I’m an interior designer with a strong background in creating 2D drawings in AutoCAD and 3D models in SketchUp, along with good-quality 3D renders. I hold a Bachelor’s degree in Interior Design and have around three years of hands-on experience in the field. Once I’m given clear instructions and requirements, I can take your project from concept to complete 2D plans, 3D models, and final renders. I aim to deliver work as quickly as possible, but I also believe in doing it right—so if something takes a little extra time, it’s only to make sure you receive the best possible results. My goal is always to meet (and hopefully exceed) your expectations with accurate, clean, and well-thought-out drawings. I’m easy to communicate with and open to feedback. If you’re looking for someone reliable who cares about the quality of the final outcome, I’d be happy to work with you. 2D Floor Plans & Elevations (AutoCAD) 3D Interior & Exterior Models (SketchUp) Photo-realistic Renders Revisions based on feedback Design support for residential, and small-scale projects Looking forward to collaborating and bringing your ideas to life.
Siang Eu T.
Horizontal Alignment Designer
London, France
- 3D Design
- CAD Design
- Simplify3D
- DIY Design
- 3D Rendering
- 3D Modeling
- Adobe InDesign
- General Design
- Gadgets Design
- Jewelry Design
- 3D Print Design
- Adobe Lightroom
- Adobe Photoshop
- Homeware Design
- Lighting Design
- Hourly Services
- Furniture Design
- Wearables Design
- Injection Molding
- Exhibition Design
- 3D Solid Modeling
- 3D Home Rendering
- 2D to 3D Modeling
- 3D Printing Design
- Electronic Devices
- 3D Design Services
- Pet Product Design
- Concept 3D Modeling
- Toys & Games Design
- 3D Product Modeling
- Laser Cutting Design
- 3D Printing Modeling
- General CAD Drafting
- CAD Drawing Services
- Part-to-CAD Modeling
- 3D Floor Plan Design
- 3D Rendering Services
- PDF to DWG Conversion
- 3D Interior Rendering
- 3D Exterior Rendering
- 3D Art Design Services
- 3D Furniture Rendering
- 3D Presentation Design
- 3D High-Rise Rendering
- 2D CAD Design Services
- 3D Scan to CAD Service
- Paper to CAD Conversion
- 3D Commercial Rendering
- 2D CAD Drafting Services
- Photorealistic Rendering
- New Invention Development
- 3D Architectural Modeling
- CAD Vectorization Services
- 3D Models of Machine Parts
- Assembly Modeling Services
- 3D CAD Translation Services
- 2D to 3D Conversion Services
- Grasshopper for Rhinoceros 3D
- CAD Data Translation Services
- 3D Furniture Modeling Services
- Rhinoceros (RhinoCAD, Rhino 3D)
- 3D Product Rendering and Design
- Raster to Vector CAD Conversion
- Image to CAD Conversion Services
- 3D Architectural Rendering Services
- Furniture Design and Engineering Services
Design project and team management, 3D CAD modelling with Rhino 3D, expert surface and solid modelling, Grasshopper. Keyshot. Adobe Photoshop, Adobe InDesign, Adobe Lightroom, Experience in metal fabr... Read more
Design project and team management, 3D CAD modelling with Rhino 3D, expert surface and solid modelling, Grasshopper. Keyshot. Adobe Photoshop, Adobe InDesign, Adobe Lightroom, Experience in metal fabrication, injection molding and blow-molding.
Talha A.
Horizontal Alignment Designer
Rawalpindi, Pakistan
- ANSYS
- XFLR5
- Matlab
- MATLAB
- EasyEDA
- openVSP
- Robotics
- ANSYS FEA
- Ansys CFD
- PCB Design
- Simulation
- CAD Design
- UAV design
- SolidWorks
- Spacecraft
- EasyEDA Pro
- CFD Analysis
- FEA Analysis
- NASA OpenVSP
- ANSYS Fluent
- Python Script
- Aircraft Design
- Design Engineer
- MATLAB Simulink
- Spacecraft Design
- Python Programming
- Engineering Design
- Drones & UAV Design
- PCB Design Services
- Reverse Engineering
- Aerodynamic Analysis
- Aerospace Engineering
- Aerospace Engineering
- Systems Tool Kit (STK)
- CFD Simulation Engineering
- SolidWorks Design Services
- 2D & 3D Modeling Solidworks
- FEA Finite Element Analysis
- Prototype Design Engineering
- Computational Fluid Dynamics
- 3D Modeling & CAD Design, FEA
- SolidWorks Engineering Services
I am a specialized UAV Fixed-Wing Design Engineer. I don't just run simulations, I perform the comprehensive aerodynamic and flight dynamics analysis required to ensure your drone is stable, efficient... Read more
I am a specialized UAV Fixed-Wing Design Engineer. I don't just run simulations, I perform the comprehensive aerodynamic and flight dynamics analysis required to ensure your drone is stable, efficient, and flight-ready. I validate my findings with extensive knowledge in Flight Dynamics, Stability, Aircraft Performance, Control Systems and Aerodynamics. I also have practical experience in CFD Field and performing high-fidelity CFD analysis. My practical experience includes designing and fabricating custom RC aircrafts and my expertise extends to the wider robotics field, including embedded systems, PID logic, and PCB design.
Hopechechet Y.
Horizontal Alignment Designer
Owerri, Nigeria
- CATIA
- ANSYS
- Simulation
- CAD Design
- SolidWorks
- 2D/3D AutoCAD
- Ansys 2022 R2
- 3D CAD Simulations
- Product Development
- Mechanical Engineer
- Autodesk Fusion 360
- Mechanical Engineering
- Siemens NX (Unigraphics)
- Ansys Composite PrePost(ACP)
I’m a Mechanical Engineer with strong experience in CAD design, product development, and technical analysis. Skilled in SolidWorks, ANSYS, and HVAC system design, I’ve successfully executed projects r... Read more
I’m a Mechanical Engineer with strong experience in CAD design, product development, and technical analysis. Skilled in SolidWorks, ANSYS, and HVAC system design, I’ve successfully executed projects ranging from robotic arm modeling to solar-powered systems and compact heat exchanger studies. My work blends creativity with precision engineering to deliver efficient, manufacturable solutions. I hold a degree in Mechanical Engineering and continue to build expertise in sustainable design and automation.
Tiago R.
Horizontal Alignment Designer
London, United Kingdom
- CAD Design
- SolidWorks
- Mechanical Design
- 3D Printing Design
- Mechanical Engineer
- PTC Creo Parametric
- Mechanical Engineering
- SolidWorks 3DEXPERIENCE
BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Kinza S.
Horizontal Alignment Designer
Fermo, Italy
- AutoCAD
- Blender
- Rendering
- CAD Design
- SolidWorks
- 3D Modeling
- 3D Modeling
- Concept Design
- Adobe Photoshop
- 3D Product Demo
- Packaging Design
- 3D Solid Modeling
- 2D to 3D Modeling
- 3D Product Modeling
- Tool Design Services
- Medical Devices Design
- 2D CAD Design Services
- Lighting Fixtures Design
- AutoCAD Drafting & Design
- Industrial Design Services
- SolidWorks Design Services
- Assembly Modeling Services
- Blender 3D Modeling Services
- Design for Assembly Services
- Food & Beverage Packaging Design
- Prototypes for Shoes, Sneakers, and Athletic Runners
I am proficient in 2D and 3D modeling and rendering with AutoCad, SolidWorks, Blender, Rihno, 3dsmax and Keyshot software. I am also familiar with Adobe Photoshop and Illustrator. My inspiration comes... Read more
I am proficient in 2D and 3D modeling and rendering with AutoCad, SolidWorks, Blender, Rihno, 3dsmax and Keyshot software. I am also familiar with Adobe Photoshop and Illustrator. My inspiration comes from Nature and history. I strive to develop key qualities such as aesthetic, problem solving, creativity and visualization.
Raghda K.
Horizontal Alignment Designer
Giza, Egypt
- 3ds Max
- 3D Models
- 3D Design
- Rendering
- Wearables
- CAD Design
- 3D Modeling
- Home Design
- 3D Rendering
- 3D Modeling
- Games Design
- Autodesk Maya
- Machine Design
- General Design
- Fashion Design
- Jewelry Design
- Display Design
- Concept Design
- Interior Design
- Homeware Design
- Lighting Design
- Packaging Design
- Furniture Design
- Adobe Illustrator
- Remodeling Design
- Exhibition Design
- Electronic Devices
- 2D to 3D Conversion
- Toys & Games Design
- 3D Art Design Services
- New Invention Development
I'm Raghda, from Egypt. I worked as a Real Estate Coordinator for 5 years then i decided to follow my passion for art. So i took a Certified Autodesk Course in Maya and now working as a 3D Designer fo... Read more
I'm Raghda, from Egypt. I worked as a Real Estate Coordinator for 5 years then i decided to follow my passion for art. So i took a Certified Autodesk Course in Maya and now working as a 3D Designer for several websites on a freelance basis. I'm very good at 3d modeling and rendering. I'm also a hard worker and will do my best to make the model as professional and realistic looking as it should.
Rathlavath R.
Horizontal Alignment Designer
Visakhapatnam, India
- ANSYS
- V-Ray
- AutoCAD
- CSi ETABS
- STAAD Pro
- CAD Design
- Home Design
- Sketch to CAD
- Sketch Drawings
- Interior Design
- Homeware Design
- Bill of Quantity
- Microsoft Office
- Furniture Design
- Design & Drafting
- Civil Engineering
- 3D Home Rendering
- Floor Plan Design
- 2D to 3D Modeling
- Quantity Surveying
- 3D House Rendering
- Structural Analysis
- Floor Plan Drawings
- Commercial Drafting
- Electrical Drafting
- General CAD Drafting
- CAD Drawing Services
- Part-to-CAD Modeling
- Swimming Pool Design
- 3D Floor Plan Design
- Construction Drawings
- 3D Rendering Services
- PDF to DWG Conversion
- 3D Interior Rendering
- 3D Exterior Rendering
- BIM Modeling Services
- Shop Drawing Services
- CAD Drafting Services
- PDF to CAD Conversion
- PDF to PWG Conversion
- New Residential Design
- 3D Furniture Rendering
- CAD Migration Services
- 3D High-Rise Rendering
- 2D CAD Design Services
- 3D Visualizer Services
- 3D Scan to CAD Service
- Structural Calculations
- Civil Drafting Services
- AutoCAD Design Services
- CAD Conversion Services
- Paper to CAD Conversion
- 3D Floor Plan Rendering
- ArchiCAD Design Services
- 2D CAD Drafting Services
- AutoCAD Drawing Services
- Architectural Site Plans
- Trimble SketchUp (Google)
- CAD Digitization Services
- AutoCAD Drafting & Design
- 3D Architectural Modeling
- Assembly Drawing Services
- 3D Real Estate Rendering
- 3D Construction Rendering
- 3D Interior Visualization
- Bentley STAAD Pro Advanced
- Structural Steel Detailing
- Contract Drafting Services
- Structural Design Services
- CAD Design File Validation
- Isometric Drawing Services
- AutoCAD Conversion Services
- Rebar Detailing and Drawing
- CAD Drawing Standardization
- 3D CAD Translation Services
- 2D Drawings and Floor Plans
- 3D Interior Rendering Design
- Cad Drafter and 3D Rendering
- 2D to 3D Conversion Services
- Drafting and Design Services
- Fabrication Drawings Services
- CAD Data Translation Services
- Structural Design and Analysis
- DWG to DGN Conversion Services
- Image to CAD Conversion Services
- Virtual Staging for Architecture
- Retail Space Construction Drawings
- 3D Architectural Rendering Services
- 3D Architectural Animation Services
- 3D Architectural Site Plan Rendering
- Architectural Sketch Design Services
- CAD Redrafting and Conversion Services
- 3D Architectural Visualization Services
CIVIL ENGINEER I CAN PROVIDE YOU A GOOD QUALITY AND ACCURATE DRAWING I HAVE DONE LOT OF PROJECTS ON AUTO CAD
CIVIL ENGINEER I CAN PROVIDE YOU A GOOD QUALITY AND ACCURATE DRAWING I HAVE DONE LOT OF PROJECTS ON AUTO CAD
Patrick W.
Horizontal Alignment Designer
Bristol, United Kingdom
- 3D Models
- 3D Design
- Rendering
- CAD Design
- 2D Drawing
- SolidWorks
- Twinmotion
- DIY Design
- Spacecraft
- 3D Modeling
- 3D Animation
- CAD Assembly
- 3D Modeling
- Drone Design
- DFM Services
- Product Design
- 2D & 3D Design
- Luxion KeyShot
- Machine Design
- General Design
- Display Design
- Concept Design
- Yacht & Marine
- Homeware Design
- Hourly Services
- Prototype Design
- Packaging Design
- Furniture Design
- Wearables Design
- Industrial Design
- 3D Drawing Design
- Exhibition Design
- Rapid Prototyping
- 3D Solid Modeling
- 2D to 3D Modeling
- 3D Printing Design
- Engineering Design
- Electronic Devices
- 3D Design Services
- Pet Product Design
- Sheet Metal Design
- Rendering 3D Design
- Mechanical Drafting
- Toys & Games Design
- Reverse Engineering
- 3D Product Modeling
- Manufacturing Design
- General CAD Drafting
- 3D Printing Services
- CAD Drawing Services
- Part-to-CAD Modeling
- 3D Product Animation
- 3D Animation Services
- 3D Rendering Services
- 3D Interior Rendering
- CAD Drafting Services
- PDF to CAD Conversion
- Mechanical CAD Design
- Design and Development
- Mechanical Engineering
- Medical Devices Design
- 3D Landscape Rendering
- 3D Furniture Rendering
- CAD Migration Services
- 2D CAD Design Services
- Manufacturing Drawings
- Mechanical 3D Rendering
- CAD Conversion Services
- Paper to CAD Conversion
- Design for Manufacturing
- Internet of Things (IoT)
- Injection Molding Design
- 2D CAD Drafting Services
- Machine Drawing Services
- Packaging Concept Design
- Trimble SketchUp (Google)
- New Invention Development
- Fused Deposition Modeling
- CAD Digitization Services
- Prototype Design Services
- Assembly Drawing Services
- Exercise Equipment Design
- Cosmetic Packaging Design
- Industrial Design Services
- SolidWorks Design Services
- Rapid Prototyping Services
- 3D Models of Machine Parts
- CAD Design File Validation
- Isometric Drawing Services
- Design Engineering Services
- Standardization of Drawings
- 2D to 3D Conversion Services
- Custom Cast Urethane Molding
- Prototype Design Engineering
- Metal Design and Fabrication
- Product Engineering Services
- Design for Assembly Services
- Drafting and Design Services
- Injection Molding and Casting
- Fabrication Drawings Services
- CAD Data Translation Services
- 3D Furniture Modeling Services
- 3D Product Rendering and Design
- Image to CAD Conversion Services
- Design for Additive Manufacturing
- Design for Manufacturing and Assembly
- Design for Manufacture and Assembly (DFMA)
- Design for Manufacturability (DFM Services)
Having graduated from university with a product design qualification I established myself as a freelance designer helping companies and individuals develop their products and ideas into 3D and creatin... Read more
Having graduated from university with a product design qualification I established myself as a freelance designer helping companies and individuals develop their products and ideas into 3D and creating parts ready for manufacture or prototype. Two years ago I co-foundered a technical design agency offering creative and technical support. We've worked with some big names such as Samsung, Lotus, Dyson, Courvoisier, Pelican, and Softbox to help develop point of sale stands, and product ranges. We use the latest CAD software to develop our models mainly utilising SolidWorks to create technical models, drawings and renders.
Dimitris Sxizas
Horizontal Alignment Designer
Athens, Greece
- AutoCAD
- Oil & Gas
- CAD Design
- SolidWorks
- 3D Modeling
- Machine Design
- AutoCAD Plant 3D
- Autodesk Inventor
- 3D Solid Modeling
- 2D to 3D Modeling
- Mechanical Engineer
- Reverse Engineering
- 3D Product Modeling
- Mechanical Engineering
- 3D Models of Machine Parts
- Assembly Modeling Services
- FEA Finite Element Analysis
- Design Engineering Services
- Mechanical Drawing Services
- 3D Product Rendering and Design
- Marine Engineering Design Services
I am a licensed Mechanical Engineer passionate about undertaking challenges, overcoming technical difficulties and working towards the realization of innovative design projects.
I am a licensed Mechanical Engineer passionate about undertaking challenges, overcoming technical difficulties and working towards the realization of innovative design projects.
Miodrag S.
Horizontal Alignment Designer
Belgrade, Serbia
- CATIA
- 3D Design
- CAD Design
- SolidWorks
- 3D Modeling
- 3D Rendering
- CAD Assembly
- Luxion KeyShot
- CNC Milling Design
- 3D Design Services
- Animation 3D Design
- 3D Rendering Services
- Mechanical Engineering
- Rhinoceros (RhinoCAD, Rhino 3D)
Hello, I'm Miodrag I have been 3d designer for over 7 years now, and i posses knowledge to help you in any project.
Hello, I'm Miodrag I have been 3d designer for over 7 years now, and i posses knowledge to help you in any project.
David S.
Horizontal Alignment Designer
Barrie, Canada
- FEA
- BOM
- AutoCAD
- ProNest
- Machining
- CAD Design
- 2D Drawing
- 3D Weldments
- 3D Modeling
- Machine Design
- Project Reviews
- Drawing Reviews
- Microsoft Excel
- Adobe Photoshop
- Equipment Design
- 3D Weld modeling
- Mechanical Design
- Material Handling
- Autodesk Inventor
- Automotive Design
- 2D to 3D Modeling
- Sheet Metal Design
- Reverse Engineering
- Product Development
- Mechanical Engineer
- Mechanical Drafting
- 3D Sheet Metal Design
- 2D Sheet Metal Design
- Mechanical Engineering
- Manufacturing Drawings
- ISO Drafting Standards
- Manufacturing Drawings
- New Product Development
- 2D CAD Drafting Services
- Standardization of Design
- Standardization of Drawings
- Autodesk Vault Professional
- Standardization of Drawings
- Mechanical Drawing Services
- Steel Shop Drawing Services
- Metal Design and Fabrication
- Product Engineering Services
- Design for Assembly Services
- Drafting and Design Services
- 2D and 3D Mechanical Drafting
- Autodesk Inventor Profesional
- Design for Manufacture and Assembly (DFMA)
- Design for Manufacturability (DFM Services)
Hire vetted design talent
Get a free estimateLast updated: Nov 18, 2026
How it works
Get a free estimate
Vetted design talent
Accuracy guarantee
FAQ for Hiring Horizontal Alignment Designers
Skills similar to Horizontal Alignment
- 2D AutoCAD Designers
- 3D Design Professionals
- 3D Surface Modeling Designers
- AutoCAD Designers
- AutoCAD Civil 3D Designers
- CAD Designers
- CAD Drafting Designers
- Civil Design Professionals
- Design Engineer Designers
- GIS Designers
- Landscape Architecture Designers
- Microsoft Excel Designers
- Microsoft Project Designers
- QGIS Designers
- Structure Design Professionals
Browse Horizontal Alignment Services
- General CAD Drafting Services (6,697)
- Civil Drafting Services (2,006)
- Civil Engineering Services (2,507)
- PDF to DWG Conversion Services (6,174)
- AutoCAD Drafting & Design Services (8,375)
- AutoCAD Design Services (5,961)
- Drafting and Design Services (3,329)
- 2D CAD Drafting Services (11,374)
- AutoCAD Drawing Services (5,836)
- As-Built Drawings Services (1,506)
- Construction Drawings Services (3,263)
- 2D to 3D Modeling Services (14,843)