Hire the best freelance Geospatial Services expert designers for your company

I am an experienced civil engineer in contracting with mega size companies in the gulf region. I am experienced in project management and able to do contracting works from A to Z in structural, fit-ou... Read more

I am an experienced civil engineer in contracting with mega size companies in the gulf region. I am experienced in project management and able to do contracting works from A to Z in structural, fit-out and infra works. On the other hand, i am also a researcher and have deep knowledge in hydro modeling. Services i can provide: -Drainage, grading and site planning -Google earth engine -Civil 3d - Hydrology and hydraulics calculations -GIS & hydro modeling (HEC-RAS, HEC-HMS, Flood routing) - Erosion control plans - Earthwork quantity calculations -Road design - Quantity takeoff - Project time scheduling - Qualitative research - Revit modeling - 3d visualization - research writing -Stormwater, sewer, and water management plan -Commercial/Residential lot subdivision -Flood modeling -LIDAR Data classifications

I am a holder of a Bachelor of Science honors degree in Geoinformatics and Surveying from the University of Zimbabwe. My degree gave me a broad overview of the broad geospatial domain. The major conte... Read more

I am a holder of a Bachelor of Science honors degree in Geoinformatics and Surveying from the University of Zimbabwe. My degree gave me a broad overview of the broad geospatial domain. The major content areas of the degree were Mine Surveying, Land Surveying, Engineering Survey, Rural and Urban Planning, GIS, Remote sensing, Law, Geodesy, and Photogrammetry. In addition to this, my degree course had courses in Mathematics, Physics, Computer Science, and Statistics, the sciences which are the basis of geoinformatics. My studies introduced me to numerous softwares that are used in the geospatial domain, software such as Surpac, Micro Station, AutoCAD, at Bindura Nickel Corporation(Trojan Mine) in Zimbabwe. I have been involved in various mapping projects at the companies I worked at, specifically topographical maps, sectional maps, sketch maps, etc. I have a strong background and experience with Arc GIS as well as QGIS. I am a committed individual who prefers working in an intellectually stimulating environment

I am an experienced GIS specialist, with vast experience working with the following GIS softwares; QGIS, Mapbox, Surfer. For any GIS needs, just send me a message with your request and i will do my be... Read more

I am an experienced GIS specialist, with vast experience working with the following GIS softwares; QGIS, Mapbox, Surfer. For any GIS needs, just send me a message with your request and i will do my best to help you.

I can support for drafting services and different GIS & CAD projects (Survey Mapping, Structural, Architectural design, Structural calculations). We are expert for drafting for Boundary survey, Plat... Read more

I can support for drafting services and different GIS & CAD projects (Survey Mapping, Structural, Architectural design, Structural calculations). We are expert for drafting for Boundary survey, Plat Survey, ALTA, Consolidation, Topographic, Sub Division, Cell Sites, ADA Ramp design, As-Builts surveys, Pole Permit, FTTH, Pole Analysis, LiDAR Data services (point cloud classification. DEM & Contour generation, Classification, Topographic mapping 3d Modelling)) & Residential design, Grading, Profiling, MEP, Paper to CAD. We can even do 3d modeling, rendering. Photogrammetry work. We have expertise in different tools like Civil3D, AutoCAD, Microstation V8 and 8i, Revit, Rhino, Sketch-up, Inroads & ArcGIS.

Experienced geospatial professional specializing in Land Surveying, Construction Surveying, Spatial Data Management, CAD, and GIS. Proven track record in infrastructure projects. Skilled team leader w... Read more

Experienced geospatial professional specializing in Land Surveying, Construction Surveying, Spatial Data Management, CAD, and GIS. Proven track record in infrastructure projects. Skilled team leader with a collaborative approach. Proficient in technical drawings, spatial analysis, and data organization.

I am a Geomatics Engineer specializing in CAD drafting, GIS mapping, and technical engineering projects. I work with AutoCAD, MicroStation, Netcad, QGIS, and ArcGIS. Through my experience at the Gene... Read more

I am a Geomatics Engineer specializing in CAD drafting, GIS mapping, and technical engineering projects. I work with AutoCAD, MicroStation, Netcad, QGIS, and ArcGIS. Through my experience at the General Directorate of Highways, I have developed practical skills in road design, technical drawings, terrain modeling, cross-sections, and engineering plans. I provide services including: * 2D CAD drafting and technical drawings * PDF to DWG conversion * CAD drawing modifications and revisions * Site plans and road design drawings * GIS mapping and digitization * Geospatial data processing and map production * 3D building modeling I am detail-oriented, reliable, and committed to delivering accurate, high-quality work on time. I communicate confidently in English and am available for remote freelance projects and long-term collaborations.

I am a dual-degree Civil and Construction Engineer with hands-on experience delivering technical projects for clients in Australia, the United States, Spain, and the United Kingdom. My core expertise... Read more

I am a dual-degree Civil and Construction Engineer with hands-on experience delivering technical projects for clients in Australia, the United States, Spain, and the United Kingdom. My core expertise spans two areas: - Civil Engineering & Site Design: Site plans, grading design, earthwork analysis, sightline profiles, and utility networks. Experienced with AutoCAD Civil 3D including surface modeling from USGS/LiDAR data, corridor design, and construction drawing sets. - Geospatial Analysis & GIS: Spatial data processing, raster/vector analysis, orthoimage interpretation, solar footprint calculations, and remote community mapping using QGIS and ArcGIS Pro. Comfortable working with datasets from USGS 3DEP, DEFRA, and national cadasters. I approach every deliverable from an engineering logic standpoint — correct coordinate systems, clean layer structure, and output files ready for construction or further analysis. Services I offer on CAD Crowd: - Civil 3D surface modeling (DTM/TIN) from LiDAR, survey, or USGS data - Grading plans, earthwork volumes, and sightline analysis PDF/sketch to AutoCAD conversion (DWG/DXF), fully layered and scaled - GIS analysis and mapping (QGIS · ArcGIS Pro) - As-built documentation and site plan updates

Polosoft Technologies provides a full range of CAD services, including CAD conversion, 2D drafting, 3D modelling, and drawing. We can provide exceptional service with no matter the complexity or size... Read more

Polosoft Technologies provides a full range of CAD services, including CAD conversion, 2D drafting, 3D modelling, and drawing. We can provide exceptional service with no matter the complexity or size of your project. We work within the scientific, engineering and manufacturing communities, specifically earth science, geospatial, mining, metrology and healthcare. From 3D CAD to GIS, and LiDAR, we continue to work closely with users and programmers within the engineering, geospatial, geology, aerospace, architecture, medical and product packaging communities worldwide. Contact us.

Professional CAD Technician and GIS Analyst with a background in Surveying and Geoinformatics from Nnamdi Azikiwe University. Experienced in CAD drafting, land surveying, topographic mapping, GIS data... Read more

Professional CAD Technician and GIS Analyst with a background in Surveying and Geoinformatics from Nnamdi Azikiwe University. Experienced in CAD drafting, land surveying, topographic mapping, GIS data processing, and technical drawing preparation. Skilled in AutoCAD, QGIS, Civil 3D, and parametric 3D modeling workflows for engineering and mapping projects. Worked as a Surveyor II and GIS Analyst at Apex Survey Services, contributing to land administration and geospatial projects. Capable of producing accurate 2D drawings, site plans, coordinate plotting, contour maps, and professional CAD documentation. Focused on detail, accuracy, and delivering clean, high-quality work on time.

I have 12 years of professional experience in GIS mapping, survey drafting, and geospatial data processing. I help clients turn raw survey and spatial data into accurate, easy-to-use maps and CAD draw... Read more

I have 12 years of professional experience in GIS mapping, survey drafting, and geospatial data processing. I help clients turn raw survey and spatial data into accurate, easy-to-use maps and CAD drawings using AutoCAD, QGIS, and Google Earth. I have worked on land surveys, topographic mapping, and drafting projects that support engineering, planning, and infrastructure needs. I am detail-oriented, reliable, and comfortable working remotely on project-based or part-time assignments, always delivering accurate results on time.

I am an experienced Land Surveyor and GIS & UAV Mapping Specialist with extensive field experience in land surveying, topographic mapping, drone mapping, CAD drafting, and geospatial data processing.... Read more

I am an experienced Land Surveyor and GIS & UAV Mapping Specialist with extensive field experience in land surveying, topographic mapping, drone mapping, CAD drafting, and geospatial data processing. My experience includes land measurement, topographic surveys, drone/UAV photogrammetry, orthomosaic generation, DEM/DSM processing, contour mapping, GIS digitizing, coordinate-based mapping, and CAD drafting. I work with AutoCAD, ArcGIS, Global Mapper, Google Earth, and Microsoft Office, and I have practical experience working with Total Station, GNSS/GPS, and DJI drone platforms. My services include: • Land & Topographic Mapping • UAV / Drone Mapping • Orthomosaic, DEM & DSM Processing • Contour & Elevation Mapping • GIS Digitizing & Spatial Data Processing • AutoCAD Survey Drafting • Coordinate & Boundary Mapping • Survey Data Processing and Visualization • CAD/GIS Data Conversion and Cleanup I have worked on field survey and mapping projects involving large project areas and multidisciplinary teams. I understand the importance of accurate data, clear deliverables, organized files, and professional communication. I am available for remote GIS, CAD, mapping, and survey-data processing projects, as well as project-based collaboration. My goal is to provide accurate, practical, and professional geospatial deliverables that meet the client's requirements and project specifications.

I am a Land Surveyor based in Nanyuki, Kenya working with Cornerstone Geo Tech. I specialize in CAD drafting, cadastral file compilation, GIS mapping, mutation layouts, field diagrams, and survey data... Read more

I am a Land Surveyor based in Nanyuki, Kenya working with Cornerstone Geo Tech. I specialize in CAD drafting, cadastral file compilation, GIS mapping, mutation layouts, field diagrams, and survey data processing for land and geospatial projects. I have experience supporting subdivision and cadastral workflows from field data collection and GNSS processing to preparation of surveyed layouts, technical drawings, and submission-ready documentation. My services include: CAD Drafting Mutation Drawings Survey Layouts GIS Mapping Cadastral Documentation GNSS Data Processing Technical Reports & SOP Documentation I am detail-oriented, reliable, and committed to delivering accurate and professional outputs for survey, engineering, and land development projects.

Certified Dassault Systèmes CATIA Champion and PLM specialist with 20+ years of cross industry experience, bridging engineering, design, and process automation. Adept at translating complex engineerin... Read more

Certified Dassault Systèmes CATIA Champion and PLM specialist with 20+ years of cross industry experience, bridging engineering, design, and process automation. Adept at translating complex engineering workflows into functional system requirements, optimizing PLM environments, and driving continuous improvement in high-tech and collaborative settings. Proven track record in implementing 3DEXPERIENCE solutions, parametric modeling, and digital twins for infrastructure, and product lifecycle management initiatives. Strong analytical mindset, user support, and training capabilities.

I am a highly skilled CAD professional specializing in Land Survey Drafting & Geospatial Mapping with 5+ years of experience working with USA-based land surveyors, engineers, and developers. My expert... Read more

I am a highly skilled CAD professional specializing in Land Survey Drafting & Geospatial Mapping with 5+ years of experience working with USA-based land surveyors, engineers, and developers. My expertise lies in AutoCAD Civil 3D and LiDAR Data Processing, ensuring precise and efficient drafting solutions tailored to industry standards. 🔹 My Expertise: ✅ Land Survey Drafting Services ✔ ALTA/NSPS Survey Drafting ✔ Boundary & Mortgage Surveys ✔ Topographic & Easement Exhibits ✔ Plot Plans, Site Plans & Final Surveys ✔ Construction Layout & As-Built Drawings ✅ LiDAR Data Processing ✔ Point Cloud (.LAS, .RCP) to CAD Conversion ✔ 3D Terrain Models & Contour Mapping 🔹 Why Work With Me? ✔ 100+ Successful CAD Drafting Projects for USA clients ✔ 100% Accurate, High-Quality Deliverables ✔ Fast Turnaround & Seamless Communication ✔ Expert in AutoCAD Civil 3D, GIS, & LiDAR Processing If you are looking for a dedicated, detail-oriented, and efficient Land Survey CAD expert, let’s collaborate! I am committed to providing accurate and high-quality drawings that align with industry standards and client expectations.

I am a Civil and Structural Engineer with 10+ years of experience delivering structural analysis, BIM modeling, infrastructure design, and technical drawing packages for residential, commercial, and m... Read more

I am a Civil and Structural Engineer with 10+ years of experience delivering structural analysis, BIM modeling, infrastructure design, and technical drawing packages for residential, commercial, and municipal projects. I specialize in taking projects from preliminary calculations and site data to fabrication-level shop drawings, permit files, and cost estimations. Whether you need load calculations for reinforced concrete and steel, civil utility plans, or accurate BOQs, I ensure code compliance and constructability. Core Engineering Services:Structural Engineering & Detailing: Full structural modeling, load validation, and execution drawings for reinforced concrete (RC) and structural steel. Foundation design, retaining walls, ground anchors, and shoring systems. CAD Drafting & BIM: 2D/3D permit drawings, construction sets, shop drawings, connection details, and as-built documentation. Civil Infrastructure & Hydraulics: Water distribution networks, sanitary sewer systems, stormwater management, and hydraulic/flood modeling. Cost Engineering & Estimation: Detailed Material Takeoffs (MTOs) and Bills of Quantities (BOQs) for civil, structural, and finishing trades to eliminate bid gaps. Software Proficiency:Structural: Robot Structural Analysis, ETABS Drafting & BIM: AutoCAD, AutoCAD Civil 3D, Revit, BIM Water Resources & Utilities: Bentley WaterCAD, SewerCAD, HEC-RAS, HEC-HMS, Flowmaster, Culvertmaster Geospatial & Planning: ArcGIS, MS Project, Primavera P6 Available for direct contracts, hourly design support, and fixed-price modeling tasks. Reach out with your drawings, site data, or architectural models for a fast review.

I am Beffon O Ating’a, a highly experienced Construction Surveyor and CAD Specialist with over 8 years of international experience. I specialize in high-precision construction surveying, topographic m... Read more

I am Beffon O Ating’a, a highly experienced Construction Surveyor and CAD Specialist with over 8 years of international experience. I specialize in high-precision construction surveying, topographic mapping, control network establishment, setting-out, and detailed CAD drafting using AutoCAD Civil 3D. My strengths include delivering accurate and reliable survey data that minimizes rework and supports timely project completion, even in challenging environments. Key highlights include: Served as Solar Site Surveyor for the 4.3 MWp NEPCO Solar Plant in Galkayo, Somalia Worked as Structural Surveyor on high-rise projects such as Dahab Tower in Mogadishu Led road surveying and setting-out for 9.75 km of urban roads in Juba, Sudan Extensive experience in CAD production, earthwork volume calculations, and as-built documentation I hold a Bachelor of Science in Geospatial Engineering from the University of Nairobi. Known for my strong attention to detail, technical accuracy, and ability to deliver quality results under pressure, I am committed to providing clients with professional surveying solutions that add real value to their projects.

I'm a CAD Drafter and Technical Documentation Specialist with 6 years of professional experience in gas distribution infrastructure, utility network drawings, and technical documentation. Throughout m... Read more

I'm a CAD Drafter and Technical Documentation Specialist with 6 years of professional experience in gas distribution infrastructure, utility network drawings, and technical documentation. Throughout my career, I've worked with over 1,000 technical drawings, including gas distribution network maps, pipeline schematics, valve location diagrams, and field documentation used by maintenance and emergency response teams. My engineering background allows me to understand not only how to create technical drawings, but also how they are used in real-world infrastructure operations. Engineering & CAD Services: Utility Mapping & CAD Drafting Gas Distribution Network Maps Redline-to-CAD / As-Built Drawings Utility Record Drawing Updates Gas & Water Network Schematics Pipeline Schematics & Technical Drawings Valve Location Maps & Diagrams Utility As-Built Drawing Updates Technical Drawing Digitization (PDF to DWG) CAD Drawing Review, Revision & Documentation Updates GIS Asset Database Maintenance Engineering Drawing Organization & Standardization Software & Technical Tools: AutoCAD — 2D CAD Drafting, Pipeline Schematics & Utility Network Drawings Esri ArcGIS Pro — GIS Mapping, Spatial Data Visualization & Utility Network Mapping QGIS — Geospatial Data Processing & Utility Mapping Adobe Photoshop — Graphic Design & Image Editing Adobe Illustrator — Vector Graphics & Marketing Materials Microsoft Office — Technical Documentation, Reports & Presentations I'm detail-oriented, responsible, and comfortable working with complex technical information, incomplete documentation, and demanding project requirements. I focus on delivering accurate, well-organized drawings and professional visual materials that meet each client's specifications. I'm also continuously expanding my knowledge of international CAD documentation practices and engineering standards.

I am a CAD Drafting and Architectural Design Professional specializing in AutoCAD and SketchUp. I transform hand sketches, PDFs, images, and concepts into accurate, clean, and well-organized 2D CAD dr... Read more

I am a CAD Drafting and Architectural Design Professional specializing in AutoCAD and SketchUp. I transform hand sketches, PDFs, images, and concepts into accurate, clean, and well-organized 2D CAD drawings and 3D models. My services include floor plans, elevations, sections, site plans, construction drawings, architectural drafting, and 3D modeling for residential and commercial projects. I focus on precision, clear documentation, organized CAD layers, attention to detail, and timely communication. My goal is to deliver practical, professional CAD solutions that help clients turn their ideas into clear and usable drawings.

Hello, and welcome to my profile! With a solid 7-year track record in the field of AutoCAD drafting, 3D modeling, and GIS technology, I am a dedicated professional who takes pride in delivering accura... Read more

Hello, and welcome to my profile! With a solid 7-year track record in the field of AutoCAD drafting, 3D modeling, and GIS technology, I am a dedicated professional who takes pride in delivering accurate and high-quality work. My expertise lies in creating precise technical drawings, realistic 3D models, and utilizing Geographic Information Systems to analyze and visualize spatial data effectively. What I bring to the table: ✅ AutoCAD Mastery: Over the years, I have honed my skills in AutoCAD, becoming proficient in producing detailed and precise 2D drawings for various industries. Whether it's architectural plans, mechanical designs, or electrical schematics, I have the knowledge and experience to translate concepts into accurate visual representations. ✅ 3D Modeling Excellence: I am skilled in creating captivating 3D models that bring your ideas to life. Using software such as Autodesk 3ds Max and SketchUp, I can turn concepts into visually stunning and functional 3D assets, perfect for presentations, prototyping, and more. ✅ GIS Proficiency: Geographic Information Systems are a powerful tool for understanding spatial patterns and making informed decisions. I have a strong background in GIS technology, allowing me to gather, analyze, and visualize geospatial data. From mapping and spatial analysis to data interpretation, I can help you harness the power of GIS. Here's what you can expect: 🔹 Precision and Detail: My commitment to accuracy ensures that your projects will be executed with the utmost attention to detail, resulting in deliverables that meet and exceed your expectations. 🔹 Timely Delivery: I understand the importance of deadlines. You can rely on me to complete your projects promptly while maintaining the highest quality standards. 🔹 Collaborative Approach: Communication is key. I believe in a collaborative work process, where your input and feedback are integral to achieving the best outcomes. 🔹 Problem Solving: Complex projects often come with challenges. My experience has equipped me with problem-solving skills to address unexpected issues and find effective solutions. Let's discuss how I can contribute to your next project. Whether it's creating detailed CAD drawings, crafting realistic 3D models, or utilizing GIS to analyze spatial data, I am here to help you achieve your goals. Contact me today, and let's get started on bringing your ideas to life! Thank you for visiting my profile.

Hello! I'm a mechanical engineering student with a focus on mechanical design and numerical simulation. With experience in both industrial and academic settings, I have completed numerous projects in... Read more

Hello! I'm a mechanical engineering student with a focus on mechanical design and numerical simulation. With experience in both industrial and academic settings, I have completed numerous projects in these fields. I possess a strong command of both commercial and open-source software, allowing me to deliver high-quality solutions tailored to my clients' needs. Whether it's designing innovative mechanical systems or performing complex simulations, I thrive on finding efficient and effective solutions to challenging problems. My expertise lies in utilizing industry-standard software, such as SolidWorks, CATIA, and AutoCAD, to create detailed 3D models and assembly designs. Additionally, I am skilled in utilizing simulation software like ANSYS, COMSOL, and Abaqus to analyze mechanical behavior and optimize designs for performance and reliability. In the industrial sector, I have successfully completed projects ranging from product design and optimization to structural analysis and fluid dynamics simulations. On the academic front, I have conducted research projects focused on developing advanced numerical models and conducting parametric studies for optimization. My commitment to delivering high-quality work, combined with my attention to detail and strong problem-solving skills, ensures that I consistently meet project requirements and exceed client expectations. I am a reliable and proactive team member, and I enjoy collaborating with clients to achieve their project goals. If you are looking for a skilled mechanical engineer who is proficient in both mechanical design and numerical simulation, I am here to help. Let's work together to bring your ideas to life and overcome engineering challenges with precision and innovation.

☑️Mechanical design Engineer. ☑️CAD 2D/3D ☑️ Proficient in SolidWorks, Inventor,Ironcad,... ☑️ with over 10 years of experience in 3D mechanical design

☑️Mechanical design Engineer. ☑️CAD 2D/3D ☑️ Proficient in SolidWorks, Inventor,Ironcad,... ☑️ with over 10 years of experience in 3D mechanical design

I think that, most of the time less is more so I'll try to convey the information needed without over complicating things. I've mostly used AutoCAD and SketchUp for university projects about layout p... Read more

I think that, most of the time less is more so I'll try to convey the information needed without over complicating things. I've mostly used AutoCAD and SketchUp for university projects about layout planning / diagram drafting and other personal CAD practices. I'm an Industrial Engineer and I live in Venezuela

Mechanical engineer (Cairo University) leading a small remote MEP BIM team. We produce construction-level MEP deliverables that pass consultant review the first time: - HVAC shop drawings: ductwork,... Read more

Mechanical engineer (Cairo University) leading a small remote MEP BIM team. We produce construction-level MEP deliverables that pass consultant review the first time: - HVAC shop drawings: ductwork, chilled-water and VRF piping, equipment schedules, sections and details - Plumbing and fire-fighting shop drawings and as-builts - Revit MEP models LOD 300 to LOD 500, including supports/hangers and asset data - Navisworks clash detection: federated models, clash matrix, clash reports and BCF issue logs - MEP quantity take-off for BOQs Selected work: - 4-floor medical facility: HVAC and chilled-water design sets, 36 AHUs, central plant and pump station modeled in Revit - School campus: 588 MEP sheets revised at LOD 500 to the approved design, with clashes resolved in Navisworks - Hospital coordination: 259 clashes reviewed and closed across floors 1–7 I also have hands-on HVAC design and equipment selection experience (Daikin VRV, chilled water), so drawings are checked as an engineer, not only as a drafter. Working style: per-sheet or per-m² pricing, your title block and standards, two consultant-comment rounds included, and clear weekly progress updates.

Myself, Prasant Tajane, having 3 years and 2 months experience in designing CAD models and performing simulation and CFD analysis as per requirements by OEM's and Customers. CAD Models:- 1. Sheet me... Read more

Myself, Prasant Tajane, having 3 years and 2 months experience in designing CAD models and performing simulation and CFD analysis as per requirements by OEM's and Customers. CAD Models:- 1. Sheet metals designing and development 2. Plastic Automotive trims and product development 3. Progressive Tool Design and Mould/ Cavity design CAE Models:- 1. 2D meshing of 2.54 mm steel sheet metal bracket for 2MPa CAE 2. Water meter for hydro-static pressure of 20 Bar 3. Motion Simulation for assemblies components and linkage working

Hi! I'm a Systems Engineering student, passionate about 3D modelling, very prominent in Blender, I have recently started working full-time as a designer.

Hi! I'm a Systems Engineering student, passionate about 3D modelling, very prominent in Blender, I have recently started working full-time as a designer.

designer architect, renders, 3d, autocad 2d and 3d

designer architect, renders, 3d, autocad 2d and 3d

Maintained strong communication with clients throughout the design process toensure alignment between their vision and the final product. Researched materials to determine appropriate selection for pr... Read more

Maintained strong communication with clients throughout the design process toensure alignment between their vision and the final product. Researched materials to determine appropriate selection for projects. Applied creative problem-solving skills to address unique challenges in thearchitectural design process. Attended team meetings to resolve technical and project issues and review projectschedules. Collaborated with clients to develop customized architectural solutions, meeting theirunique needs and preferences. Reviewed technical drawings developed by CAD technicians and drafters. Developed comprehensive project documentation, including site plans, elevations,sections, and details for clear communication of design intent. Determined project costs and made adjustments to keep projects within budget. Conducted comprehensive site analyses to ensure structural designs were inharmony with their natural environments. Developed detailed architectural models to provide clients with clear visualizations of proposed projects. Lumion AdobePhotoshop 3Dmodeling and visualization Time menagment Problem solving Adaptability