Hire the best freelance DraftSight expert designers for your company

I have a mechanical engineering bachelor's from the University of Kentucky. I have been a mechanical designer working with companies such as Toyota, John Deere, Hino, and others since 2010. I have u... Read more

I have a mechanical engineering bachelor's from the University of Kentucky. I have been a mechanical designer working with companies such as Toyota, John Deere, Hino, and others since 2010. I have used SolidWorks, Inventor, AutoCad, and DraftSight to complete manufacturing machine designs as well as tooling/jig design and modifications. Currently I am using SolidWorks for design projects.

PROFILE AND OBJECTIVES Mechanical-electrical engineer of Exact Sciences and Engineering University Center (CUCEI), Universidad de Guadalajara, final average 95.7/100. With high degree of compromise... Read more

PROFILE AND OBJECTIVES Mechanical-electrical engineer of Exact Sciences and Engineering University Center (CUCEI), Universidad de Guadalajara, final average 95.7/100. With high degree of compromise and responsibility, honest and frank. Showing desire and continuous search of learning in his study field, complementary disciplines, as well as in focus knowledge of mechanical design prioritizing the functionality, but without neglect the sustainability and esthetics of the design. Strengthening and deepening of his interest knowledge, acquisition of new skills that facilitate his active participation in application projects, with the purpose is to offer solutions in automation, transport and/or energy. He would like to work in research, development and application of technologies and methodologies, focused on social problems satisfaction, both daily and general, contemplating the proper handling of natural resources from an holistic point of view. WORK EXPERIENCE Since March/2017 to the present Place: Sistema BEA, company that offer solutions for urban and suburban transport Job: Industrial and mechanical design engineer Since February/2016 to September/2016 Place: University of Guadalajara, CUCEI, Electronic and Computation Department Job: Social service provider in mechanical area

I am working in Design field from last 10 years, During this professional carrier i am develop more than 900 project / component.

I am working in Design field from last 10 years, During this professional carrier i am develop more than 900 project / component.

Mechanical CAD Designer with more than 4 years of experience in the steel fabrication industry and 6 months in the blow-molding plastics industry. Proficiency with the use of PTC Creo, Onshape, Solidw... Read more

Mechanical CAD Designer with more than 4 years of experience in the steel fabrication industry and 6 months in the blow-molding plastics industry. Proficiency with the use of PTC Creo, Onshape, Solidworks (CSWP) and AutoCAD for design, build, and assembly. Professional, creative, analytical, and highly versatile.

I'm Hüseyin EROĞLU from Turkey, I'm a Mechanical Engineer and Automotive Designer, CAD Trainer Expert (Catia V5, Solidworks, Siemens NX). I'm a Exterior Car Designer in Bertrandt AG for new automoti... Read more

I'm Hüseyin EROĞLU from Turkey, I'm a Mechanical Engineer and Automotive Designer, CAD Trainer Expert (Catia V5, Solidworks, Siemens NX). I'm a Exterior Car Designer in Bertrandt AG for new automotive projects. (Especially Plastics) I use Catia V5, Solidworks and Siemens NX for mechanical or Automotive projects, and Catia V5 for Analysis of designed systems, I use Keyshot for rendering the designed models. I'm a freelance designer for Mechanical and Automotive projects,

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawing... Read more

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawings, preliminary layouts, P&IDs, and more. My expertise is in rotating equipment, specifically centrifugal pumps, vacuum pumps, and compressors from 1.5 HP (1 kW) to upwards of 1,000 HP (750 kW). I have also had experience in other pneumatic applications as well as office furniture design. I have designed piping runs (including valves, gauges, transmitters, other instrumentation), structural steel frames, gear reducers, V-Belt driven equipment, selected motors, designed for adherence to stringent specifications, and communicate regularly directly with customers. I am finishing my Bachelor's degree in Mechanical Engineering Technology and will continue to pursue my MBA after that. I am offering services in Solidworks 2019 (2D & 3D) and Draftsight (2D) and can save files in any of the supported formats (i.e. .SLDPRT, .SLDASM, .SLDDRW, .STEP, .DWG, etc.) If you are looking for a quick layout, concept, or have a small part that needs to be modeled in 3D I can make that happen. If you need a full blown design with detailed 2D drawings I can make that happen as well. I oversee my projects from start to completion!

Have been employed in the Mechanical engineering , Ceramic Conveyor line machine equipment and Pharmaceutical equipment's industries. Specialize in Modelling & Drafting, solid modeling with Solid Wor... Read more

Have been employed in the Mechanical engineering , Ceramic Conveyor line machine equipment and Pharmaceutical equipment's industries. Specialize in Modelling & Drafting, solid modeling with Solid Works, Mechanical Engineering, and mechanical design. My software experience has been with Solid Works, Auto cad, Solid edge and a working knowledge of JDE Edwards, BPLogix and Corporate Order processing.

Experienced Industrial Engineer with a strong background in 3D mechanical design, product development, and turnkey industrial solutions. I specialize in packaging machinery and conveyor systems, with... Read more

Experienced Industrial Engineer with a strong background in 3D mechanical design, product development, and turnkey industrial solutions. I specialize in packaging machinery and conveyor systems, with over 5 years of hands-on experience managing full-cycle projects—from concept and CAD modeling to supplier coordination, manufacturing, and on-site installation. I support companies by providing fast, reliable, and detail-oriented design services using SolidWorks. Whether you're an overloaded engineering department or a business without in-house design capabilities, I can help you bring your ideas to life with precision and efficiency. Let’s build smart, functional, and cost-effective solutions together.

Experienced Mechanical Design & Tooling Engineer with a history of developing conceptual and detailed designs ensuring the product functions as intended. Demonstrated ability in designing and analyzin... Read more

Experienced Mechanical Design & Tooling Engineer with a history of developing conceptual and detailed designs ensuring the product functions as intended. Demonstrated ability in designing and analyzing parametric parts and moveable assemblies using a variety of complex features within SolidWorks.

Hey there, I'm Nishant Yadav a Mechatronics Engineer and CAD Engineer. I know the value of time and always deliver the work on time. To give good output is in my attitude. My Motive is to make my Clie... Read more

Hey there, I'm Nishant Yadav a Mechatronics Engineer and CAD Engineer. I know the value of time and always deliver the work on time. To give good output is in my attitude. My Motive is to make my Clients happy without adding additional charges. I always love to work with my buyers in a friendly environment. Always here to help you even after completing the projects. I am jobless and always available for quick jobs.

I am primarily trained in material processing, special purpose machinery and light/medium structural industries . Most recently working on product development and DFMA for high volume electronic and p... Read more

I am primarily trained in material processing, special purpose machinery and light/medium structural industries . Most recently working on product development and DFMA for high volume electronic and plastic industries . I have over nine years industry experience and I have extensive knowledgeof various CAD and analytical packages including AutoCAD, Solidworks and Creo Parametric. Currently I am working as a freelancer, based in Montreal, QC. I am always enthusiastic to hear about innovative and exciting new opportunities

*Two years of experience as PROJECT ENGINEER in "PCB TEST JIGS & FIXTURE "manufacturing company. *Where I am doing custom designing of PCB TEST JIGS and fixtures for the different customer as per the... Read more

*Two years of experience as PROJECT ENGINEER in "PCB TEST JIGS & FIXTURE "manufacturing company. *Where I am doing custom designing of PCB TEST JIGS and fixtures for the different customer as per their need. *I have a brief knowledge of cad software like AutoCAD, CATIA, Solidworks, creo,NX, draftsight etc. *Also doing the manufacturing job too by machining this product in the CNC MACHINE. *Also more than one year's experience as CNC operator in the same company. *So I have command over the design to final assembly of the custom built product.

Every successful product starts with a well-planned design. Whether you're developing a new product from scratch, improving an existing concept, or preparing files for manufacturing, I provide accurat... Read more

Every successful product starts with a well-planned design. Whether you're developing a new product from scratch, improving an existing concept, or preparing files for manufacturing, I provide accurate, production-ready CAD solutions that help bring ideas to life efficiently and professionally. I specialize in transforming concepts, sketches, images, and technical requirements into detailed 3D models and manufacturing-ready engineering drawings. My focus is on delivering designs that are visually accurate, mechanically sound, and optimized for fabrication, prototyping, and production. My Services Include: ✔ Product Design & Development ✔ Mechanical Design ✔ 3D CAD Modeling ✔ Parametric CAD Design ✔ Assembly Modeling ✔ Technical Drawings ✔ Manufacturing Drawings ✔ Sheet Metal Design ✔ Plastic Part Design ✔ Reverse Engineering ✔ Design for Manufacturing (DFM) ✔ Design for Assembly (DFA) ✔ Prototype Development ✔ 3D Printing File Preparation ✔ CAD Drafting ✔ Engineering Documentation ✔ BOM (Bill of Materials) ✔ CAD File Conversion ✔ STL File Creation ✔ STEP, IGES & Parasolid File Generation Software Expertise: • SolidWorks • AutoCAD • Fusion 360 • Autodesk Inventor • CATIA • Siemens NX • Creo Parametric • Onshape • DraftSight • KeyShot • Blender • Adobe Illustrator Industries I Support: • Consumer Products • Manufacturing • Industrial Equipment • Automotive Components • Medical Devices • Furniture Design • Electronics Enclosures • Startups • Product Inventors • Engineering Firms • Architecture & Construction AND MORE... Why Clients Work With Me: ✔ Manufacturing-ready CAD models ✔ Accurate dimensions and tolerances ✔ Fast turnaround times ✔ Clear communication throughout the project ✔ Organized CAD files ✔ High-quality engineering documentation ✔ Professional attention to detail ✔ Reliable project delivery Whether you need a simple part modeled or a complete product designed from concept to production, I focus on creating CAD solutions that save time, reduce manufacturing issues, and meet your project goals. I look forward to helping you turn your ideas into accurate, functional, and production-ready designs.

Senior CAD Designer with over 20 years of experience preparing residential and commercial construction documents throughout Florida. Specialized in permit drawings, MEP drafting, structural drafting,... Read more

Senior CAD Designer with over 20 years of experience preparing residential and commercial construction documents throughout Florida. Specialized in permit drawings, MEP drafting, structural drafting, plumbing, mechanical, electrical, gas and architectural plans for permit applications and construction projects. Extensive experience with Florida Building Code (FBC) compliance, Miami-Dade permitting procedures, plan revisions, code corrections, as-built drawings, Bluebeam markups and construction documentation. Services provided to homeowners, contractors, engineers, architects and developers. Experienced in residential additions, remodeling projects, swimming pools, pergolas, permit revisions, code compliance and construction drawing preparation. Experienced with Florida Building Code (FBC), Miami-Dade permitting procedures, plan revisions, as-built drawings, permit corrections and construction documentation. Services include: • Permit Drawings • Plumbing Plans • Mechanical Plans • Electrical Plans • Gas Plans • As-Built Drawings • Construction Documents • CAD Drafting and Revisions • Bluebeam Markups and Corrections Committed to delivering accurate, professional and permit-ready drawings on time.

Freelance Industrial & Product Designer - 3D Modeling - Rendering www.mu-industrialdesign.com

Freelance Industrial & Product Designer - 3D Modeling - Rendering www.mu-industrialdesign.com

Over 20 years experience in mechanical engineering. Technical skills: cranes and lifting, material handling, shredding and crushing equipment, mechatronics, piping and valves, pressure equipment, mach... Read more

Over 20 years experience in mechanical engineering. Technical skills: cranes and lifting, material handling, shredding and crushing equipment, mechatronics, piping and valves, pressure equipment, machine design.

I have a strong connection between knowledge, experience, and creativity. I pay close attention to detail and strive to create not only functional but also aesthetically pleasing products and devices.... Read more

I have a strong connection between knowledge, experience, and creativity. I pay close attention to detail and strive to create not only functional but also aesthetically pleasing products and devices. With extensive experience in large-scale projects, I know how to lead and manage tasks effectively, integrate multidisciplinary solutions, and deliver exactly what is required. Key Skills and Experience: 🔹 CAD Systems: Catia V5/V6, SolidWorks, Creo (Pro/E), Siemens NX, AutoCAD (Mechanical, Architecture), Autodesk Inventor/Fusion, Mechanical Desktop, Chief Architect, Revit, SketchUp, 3DVIA Composer, DraftSight 🔹 CAM: Delcam, Siemens NX NC, CATIA NC Modules, Sinumerik 840D 🔹 CAE & Simulation: Moldflow, ANSYS (including CFX), Abaqus, LS-Dyna, COMSOL, AutoForm, MAGMA5, SUTCAST, Simulia, Adina, Nastran, Patran, EasyBlank, Femap 🔹 Mining & Geology: Noddy, Strater, RockWorks, GeoStudio, Surpac, Surfer, Paraview Geo, Geovia 🔹 GIS: QGIS, ArcGIS, MapInfo Professional 🔹 Project Management & PLM: SAP Enovia, Siemens Teamcenter 🔹 BIM: Digital Project 🔹 Rendering & Visualization: PhotoView360, Lumion, Showcase, KeyShot, Artlantis Studio 🔹 Programming Languages: Fortran, Visual Basic, Scheme 🔹 LIDAR, Geodesy, GIS Expertise 🔹 Software & Communication Tools: MS Office, OpenOffice, Adobe Photoshop, Lightroom, Dreamweaver, Thunderbird, MS Access 🔹 Optics & Simulation: Zemax, TracePro, OSLO, CODE V, ASAP Additional Expertise: Geometric Dimensioning & Tolerancing (ANSI Y14.5M/ASME Y14.5, ISO standards) BOM creation and management CFD, Heat Transfer, FEM, Sheet Metal Forming, Collision & Impact Analysis Rapid Prototyping, SQL Queries Strong social and technical skills Analytical thinker with strong decision-making abilities Ambitious, communicative, and adaptable to diverse work environments I am highly motivated to grow professionally and eager to take on new challenges.

-> Developed over 100 patentable products, most of which are patented by clients -> Specialize in creating cutting-edge 3D products integrating IoT, robotics, and AI technologies -> Specialized team f... Read more

-> Developed over 100 patentable products, most of which are patented by clients -> Specialize in creating cutting-edge 3D products integrating IoT, robotics, and AI technologies -> Specialized team for 2D Drafting and 2D to 3D Requirements. Detail oriented work with full client satisfaction. -> Expertise in designing smart, connected devices, advanced robotic systems, and AI-powered solutions -> Bring ideas to life through detailed product visualization and precise manufacturing drawings -> Ensure meticulous execution from design to production If you have anything to develop virtually in 3D, let's have a chat!

Certified SolidWorks Professional with 29+ years of hands-on experience in product design, mechanical engineering, and CAD modeling. I specialize in delivering manufacturable, high-quality designs tha... Read more

Certified SolidWorks Professional with 29+ years of hands-on experience in product design, mechanical engineering, and CAD modeling. I specialize in delivering manufacturable, high-quality designs that move quickly from concept to production. My Strengths & Skillsets Expert SolidWorks user (modeling, assemblies, sheet metal, weldments, advanced surfacing, Visualize, Composer, PDM, xShape) Deep expertise in Design for Manufacturing (DFM), GD&T, tolerances, BOMs, ECRs, and production documentation Proven in injection & blow molding, sheet metal fabrication, molded plastics, ceramics, bamboo, and hybrid assemblies Photorealistic renderings, 3D animations, reverse engineering, patent drawings, owners manuals, and rapid prototyping (FDM & resin 3D printing) Strong manufacturing support, including Chinese and overseas production coordination Key Accomplishments & Projects Designed and optimized consumer products (kitchen items, outdoor furniture, basketball systems, Tiki torches/lamps), medical devices, commercial refrigeration, high-performance doors, and industrial machinery Delivered hundreds of successful freelance projects through Freelance CAD Design, LLC with 100% client satisfaction, repeat business, and referrals Held senior roles at Spalding (Sr. Mechanical Designer & SolidWorks Admin), Perlick (Custom Product Designer), Lamplight, Rytec, HS Design, and Leeson Electric—consistently reducing costs, improving quality, and supporting fast-paced market-driven launches Education & Certifications Associate Degree in Applied Science – Computer Aided Design, ITT Technical Institute Additional Engineering Courses, Milwaukee School of Engineering (MSOE) Certified SolidWorks Professional (CSWP) Security Awareness & Leadership Training Certificates I’m detail-oriented, extremely responsive, and treat every project as an extension of your team. Ready to bring your next product to life with precision and manufacturability in mind.

I am a freelance designer with vast CAD experience (20+ years). I have designed a multitude of plastic and metal components including: specialised medical equipment, mobile phones, special purpose ma... Read more

I am a freelance designer with vast CAD experience (20+ years). I have designed a multitude of plastic and metal components including: specialised medical equipment, mobile phones, special purpose machinery, large closures for the oil and gas industry, cosmetic casings and spent many years in the plastic injection mould field and much much more. I began my career as a Toolmaker and realised very early on that my future lay in design. I was always very interested in design, especially mechanical design, and became even more enthusiastic with the introduction 3D. This changed the thinking on how designs evolved and I have embraced this technology. (I was a real pioneer and slowly persuaded others that this was the future. I was responsible for introducing CAD to many companies). Throughout my career I have sought out new ideas and technology and implement them in my workplace. It is my passion. Before becoming a freelancer I worked on many prestigious projects. I have overseen staff, been part of the team - all the usual things; budgets, training etc. However, since becoming freelance, a whole new world of has opened up to me. I have been involved in an overwhelming variety of projects - from a simple tool to a lifesaving device. I work very much with the client on the project design. Some are for crowd funding projects and the enthusiasm of the client soon rubs off on me. My passion is still strong. I am English. I live and work in Spain and can communicate by phone, ▒▒▒▒▒ or email.

Experienced Controls Engineer specializing in AutoCAD Electrical drafting for industrial control panels and automation systems. I create accurate, field-ready schematics, panel layouts, wire mappings,... Read more

Experienced Controls Engineer specializing in AutoCAD Electrical drafting for industrial control panels and automation systems. I create accurate, field-ready schematics, panel layouts, wire mappings, BOMs, and complete documentation packages compliant with UL 508A and NEC standards. Proficient at incorporating redlines, engineer markups, and revisions to deliver production-quality drawings. Hands-on experience in controls integration and support, including: Siemens TIA Portal (basic ladder logic, AOI development, HMI basics) Allen-Bradley Studio 5000 VFDs, sensors, servos, analog/digital I/O, timers, PID tuning basics SCADA/HMI data flow and real-time troubleshooting/debugging Built, wired, and debugged 30+ electrical panels. Strong attention to detail ensures consistent high-quality output. Available during US business hours (Pacific Time) and open to hourly or fixed-price projects. Let’s discuss how I can support your electrical schematic drawing, control panel design, panel layout, or basic controls integration needs. Ready to deliver fast and accurate results.

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

I'm a mechanical engineer, I have 3 year of experience in mechanical design and drawings in the automation sector. I'm an expert of solidworks and I had work on automatic machine for the automotive... Read more

I'm a mechanical engineer, I have 3 year of experience in mechanical design and drawings in the automation sector. I'm an expert of solidworks and I had work on automatic machine for the automotive sector.

I will destroy the top level designers

I will destroy the top level designers

Born in Italy, drop out from IUAV Architecture faculty in Venice, studied Marketing and Communication techniques and worked as Communication and Marketing Manager for some of the most innovative IT an... Read more

Born in Italy, drop out from IUAV Architecture faculty in Venice, studied Marketing and Communication techniques and worked as Communication and Marketing Manager for some of the most innovative IT and Electronics manufacturers in Italy at the end of the 80s. As a designer, achieved several international design awards: six IF Design in Hannover, two SMAU Design in Milano, selected to represent the Italian Design at two BIO Design exhibitions in Liubljiana, World's Best Interior Design in 2010 for the Switch Bowling in Dubai, ISPO Innovation and Design award in Munich 2016. Started working in 3D CAD in 1986 on Computervision and Intergraph Unix workstations, proficient in advanced surfacing techniques and design for manufacturing, more than 30 years of professional experience on product design and manufacturing, especially in the field of plastic injection molding, advanced composites and lightweight alloy die casting, mmc and thixotropic molding.

Hello! My name is Mateus Dias, and I am a Mechanical CAD Designer specializing in 3D modeling, mechanical design, product visualization, and manufacturing-ready technical documentation. I work with a... Read more

Hello! My name is Mateus Dias, and I am a Mechanical CAD Designer specializing in 3D modeling, mechanical design, product visualization, and manufacturing-ready technical documentation. I work with a wide range of engineering and industrial projects, delivering precise, clean, and functional CAD models for manufacturing, prototyping, and product development. I support clients in: 3D CAD modeling of mechanical parts, assemblies, consumer products, mechanisms, sheet metal, machined components, plastic housings, and industrial equipment Technical drawings (2D) with full dimensioning, tolerances, sections, exploded views, and manufacturing notes Product visualization & rendering for marketing, catalogs, and presentations Design for Manufacturing (DFM) for CNC machining, sheet metal, injection molding, 3D printing, and welding Mechanism design (rotary systems, sliding systems, dampers, tension devices, retractable systems, hinges, etc.) As-built corrections, industrial layouts, piping elements, and general technical revisions Prototype development, including geometry validation, part splitting, tolerances, and print-ready files ✔ Software Expertise SolidWorks Siemens NX Solid Edge DraftSight Blender KeyShot / Marmoset 3D printing preparation tools ✔ Why clients choose me Strong mechanical background High attention to detail Clean, organized CAD structure Fast communication and reliable delivery Experience with both engineering projects and visual/marketing renderings Ability to take a concept and turn it into a fully functional, manufacturable solution ✔ Project Types I specialize in Industrial machinery and mechanical components Furniture mechanisms and retractable systems Plastic housings and consumer products Sheet metal and structural assemblies Rotary systems, sliding assemblies, gear mechanisms Product visualization for catalogs and brand materials 3D printing prototypes (FDM, SLA, SLS) Full CAD packages (3D + 2D + BOM + renders) If you need a precise, reliable, and detail-oriented CAD designer for engineering or product development, I’m ready to support your project from concept to manufacturing. Let’s build your project together. — Mateus Dias | Diaz CAD Studio

I am a very motivated individual and a natural encourager. I am a hardworking, trustworthy, and reliable individual. I enjoy working on design such as DraftSight and Autodesk Fusion 360. I also enjoy... Read more

I am a very motivated individual and a natural encourager. I am a hardworking, trustworthy, and reliable individual. I enjoy working on design such as DraftSight and Autodesk Fusion 360. I also enjoy working on machines such as Lathe, Milling, Grinding, Turning, and CNC (Computer Numerical Control). My success in my current role over the past 4 years is an indicator of my commitment to excellence and my understanding of what it takes to be a great Drafter and Engineer. I am willing to accept challenging situations and help you make your concept a reality.