Hire the best freelance CAD Drafter expert designers for your company

I have been working as a Civil Designer/Drafter for 23 years. I’m a Civil CAD Lead of several Civil engineering projects, including levee projects, canal and drainage projects, roadway projects, flood... Read more

I have been working as a Civil Designer/Drafter for 23 years. I’m a Civil CAD Lead of several Civil engineering projects, including levee projects, canal and drainage projects, roadway projects, floodwall and cutoff wall projects, and site development projects. As a Civil Designer I produced a lot of CAD drawings from planning to construction phases, which included preparation of site layout, construction phasing plan, demolition plan, utility plan and profile, road plan and profile, levee plan and profile, flood wall and cutoff wall plan and profile, grading and drainage plan, erosion control plan, and civil details. For Architectural, Electrical, Mechanical and Structural disciplines, I can do 2D drafting work. Software I used include AutoCAD, Civil 3D, AutoCAD MEP, Revit, Microstation, and Inroads.

Stuck with a messy sketch, an unclear drawing, or a design idea that needs to become a real technical file. I provide two-dimensional drafting and three-dimensional modeling, both done in AutoCAD, tur... Read more

Stuck with a messy sketch, an unclear drawing, or a design idea that needs to become a real technical file. I provide two-dimensional drafting and three-dimensional modeling, both done in AutoCAD, turning rough sketches, scans, and outdated drawings into clean, fully-dimensioned files ready for manufacturing, approval, or documentation. No back-and-forth confusion, no missing dimensions, no delays. Just a clear, ready-to-use file for your team, client, or workshop. Fast turnaround, accurate work, every time.

I'm a mechanical AutoCAD designer with over 2 year of experience in creating precise 2D and 3D CAD designs for manufacturing, prototyping, and industrial applications.

I'm a mechanical AutoCAD designer with over 2 year of experience in creating precise 2D and 3D CAD designs for manufacturing, prototyping, and industrial applications.

Civil Engineer and CAD/Shop Drawing Specialist with over 20 years of experience in AutoCAD and more than 10 years of experience in 2D/3D drafting and shop drawings. Experienced in structural detailing... Read more

Civil Engineer and CAD/Shop Drawing Specialist with over 20 years of experience in AutoCAD and more than 10 years of experience in 2D/3D drafting and shop drawings. Experienced in structural detailing, reinforcement drawings, construction documentation, and technical drawings for projects in Qatar, UAE, Saudi Arabia, and other Gulf countries. Skilled in preparing accurate, detailed drawings from design documents and coordinating drawings to meet project requirements and construction standards. I also have experience in 3D modeling using Autodesk Inventor and a strong background in manufacturing and quality control. Detail-oriented, reliable, and committed to delivering accurate work within project deadlines.

A dedicated Mechanical Engineer with 2 years of experience in AutoCAD drafting and telecommunication layout design. Skilled in 2D and 3D modeling (AutoCAD, SolidWorks, CATIA) and preparing precise eng... Read more

A dedicated Mechanical Engineer with 2 years of experience in AutoCAD drafting and telecommunication layout design. Skilled in 2D and 3D modeling (AutoCAD, SolidWorks, CATIA) and preparing precise engineering documentation. Strong analytical and problem-solving abilities with a focus on accuracy and design efficiency. Projects: 1).Design , Fabrication and analysis of Scissor Jack with Double Start Thread - 2021 2).Design and Fabrication of Machine vise - 2020 3).Design and Fabrication of a Bifilar Suspension - 2018 Education: B.E. in Mechanical Engineering – Saranathan College of Engineering, Anna University (2017–2021).

I help CAD Engineers and their engineering teams in the metal casting industry, with a starting focus on sand and die casting, turn part concepts, sketches, references, measurements, and existing desi... Read more

I help CAD Engineers and their engineering teams in the metal casting industry, with a starting focus on sand and die casting, turn part concepts, sketches, references, measurements, and existing designs into clear, accurate, manufacturable CAD models and engineering drawings through my skill of CAD drafting and modelling. My work involves and focuses on 2D-to-3D conversion, CAD recreation and revision, dimensioning and detailing, and the preparation of technical drawings for manufacturing and fabrication. My experience includes mechanical components, assemblies, industrial equipment, fabrication work, and casting-oriented designs. This includes equipment developed during industrial training, such as a locally built dryer and gas burner, as well as a table tennis trophy that I designed for sand casting and was physically manufactured. With a B.Sc. in Mechanical Engineering and experience across 10+ academic, industrial, and personal CAD projects, I am continuing to build my capabilities across CAD/CAM, mechanical design, manufacturing, and casting-related applications. If you have a component, drawing, sketch, or existing CAD model that needs to be developed, revised, or documented, I would be glad to discuss how I can support the project.

I'm an experienced Architectural Drafter with 10+ years of experience helping property owners and developers in Surabaya's premium areas get their building permits approved. I specialize in: + Comple... Read more

I'm an experienced Architectural Drafter with 10+ years of experience helping property owners and developers in Surabaya's premium areas get their building permits approved. I specialize in: + Complete building permit (IMB) drawing sets + Floor plans, elevations, sections + Structural foundation plans + Sanitary & electrical layouts + 3D renderings I work remotely, communicate clearly in English, and deliver accurate, compliant drawings on time. My portfolio includes projects from Royal Residence, Citraland, and Pakuwon—some of the most strictly regulated residential areas in Surabaya. I'm available for freelance projects and ongoing collaboration. Let's discuss your project needs.

AutoCad Drafter with over 18 years experience.

AutoCad Drafter with over 18 years experience.

25+ years AutoCAD Experience President, Dallas/Fort Worth AutoCAD Users Group

25+ years AutoCAD Experience President, Dallas/Fort Worth AutoCAD Users Group

Hello, my name is Kimberley Robinson and have been drafting with AutoCAD for 20 years. I’ve drafted numerous sketches, plans, and maps, mostly in the legal land surveying industry. I was a project man... Read more

Hello, my name is Kimberley Robinson and have been drafting with AutoCAD for 20 years. I’ve drafted numerous sketches, plans, and maps, mostly in the legal land surveying industry. I was a project manager for Southern SK of As-Built Maps of almost 800 flowlines and shapefiles created. I ran this project and successfully kept on the assigned budget per area, for large Oil & Gas company. My communication skills are honed by my experience as a Drafting Supervisor while living in northern Alberta. Microsoft Office knowledge with Excel and Word to assist tasks. Specializing in AutoCAD 2D drafting, I do work with AutoCAD Civil 3D. I understand the importance of detail and have the discipline skill of the Alberta Land Surveys Act, Alberta Land Titles Office and Crown Lands strict procedures. As part of urban design, I was involved in various stages of drafting for engineering design, as well as all survey plans, of an 88 lot subdivision in AutoCAD Civil 3D. I’ve also worked on a massive plant construction project which had to be in imperial measurements. With my knowledge, I played the key role in template requirements for AutoCAD setup. When you hire me, here’s what we would do: 1. Click the message button to invite me to your job. 2. Once everything is accepted, we would talk. 3. We’ll go over all the details, how things need to be laid out, functionality, deliverables expected, etc. If that all sounds good, click the “message” button and let's get your project completed. I look forward to hear from you.

I am a Civil engineering fresher. I can do drafting services. I don't have any prior experience in this but I believe I can do.

I am a Civil engineering fresher. I can do drafting services. I don't have any prior experience in this but I believe I can do.

Hi there My name is Ryan and I am a professional in CAD. If you need anything, just tell me.

Hi there My name is Ryan and I am a professional in CAD. If you need anything, just tell me.

I am young college graduate looking to improve my skills and portfolio. CAD and SketchUP passionate, whether its a small or big project.

I am young college graduate looking to improve my skills and portfolio. CAD and SketchUP passionate, whether its a small or big project.

Knowledgeable Draftsman proficient in Autodesk AutoCAD. Adept at producing high-quality plans, schematics, and strong attention to details. Bringing 4 years’ experience in Commercial and Residential P... Read more

Knowledgeable Draftsman proficient in Autodesk AutoCAD. Adept at producing high-quality plans, schematics, and strong attention to details. Bringing 4 years’ experience in Commercial and Residential Projects, collaborate with engineers and project teams during the design process to deliver highest quality work.

Hello, My name is Daniel, an Associate’s landsacpe architect with over 2 years experience in designing public areas. Independent worker, self-motivated, and proficient with computers. Looking to wor... Read more

Hello, My name is Daniel, an Associate’s landsacpe architect with over 2 years experience in designing public areas. Independent worker, self-motivated, and proficient with computers. Looking to work as a freelance Cad drafter. I have worked as a landscape architect on projects of various scales that included working plan, detailing, excavation plans, and planting plans. Highly skilled with Autocad, Photoshop, Sketchup and Conceptual hand sketching.

Architectural Engineering graduate from the University of Texas at Arlington with4 years of experience with CAD and drafting design.

Architectural Engineering graduate from the University of Texas at Arlington with4 years of experience with CAD and drafting design.

Experience in detailed drawings and parametric modeling and design. I'm just an engineering student trying to freelance my work in order to gain experience for my future career in technologies.

Experience in detailed drawings and parametric modeling and design. I'm just an engineering student trying to freelance my work in order to gain experience for my future career in technologies.

I am an experienced CAD Designer, who is flexible, adaptable and able to manage multiple priorities at the same time. As a driven individual who wants to progress, I am now looking to work in an energ... Read more

I am an experienced CAD Designer, who is flexible, adaptable and able to manage multiple priorities at the same time. As a driven individual who wants to progress, I am now looking to work in an energetic and performance-driven environment where talent is not overlooked. I feel that your exciting company is a natural place for a hard working team player like myself, fully accountable and resilient. For the past 8 years I have been employed in a busy role where I am required to transfer the clients’ demands into 2D or 3D design using the AutoCAD, Tekla Structures and StruCad software. In addition for the past 2 years I have been the main engineer in the Technical Department in my present place of employment, where I am responsible for preparation of detailed shop drawings, material lists and preparation of all the necessary documents for production. You will find me to be a reliable person who has a professional, calm and honest approach to all work related matters. Technically minded and with good problem resolution skills, I am able to work effectively in fast paced and ever changing environments.