Farm Design Drawing

Contest Closed
Description:
Details of How to 2 Arches of Land (12 Plots)
Measurement: 720fts by 1,440 fts
Fish Pond
1. The land allocation for this fish pond is 1 plot of land which is measure by feet 60ft (Wide) by 120ft (Long)
2. The fish pond will have 7 rolls and 2 columns
3. The fish pond area will also have water tank, and water supplies to all the ponds
4. Storage Rooms this should within the plan of the fish pond

Plantain Farm
1. The land allocation for this plantain farm is 6 plots of land
2. The design of the farm should be 2 roles and 2 columns
3. The farm should have water pipes for wetting the plantain.
a. This water can be collected from the wastes / changed / drained of the fish pond to wet the plantain
b. Also the farm should have connected pipes for wetting from the main water supply tank

Cocoyam Farm
1. The land allocation for this plantain farm is 2 plots of land
2. The design of the farm should be 7 roles and 2 columns per plots
3. The farm should have water pipes for wetting the cocoyam.
a. This water can be collected from the wastes / changed / drained of the fish pond to wet the plantain
b. Also the farm should have connected pipes for wetting from the main water supply tank

Cassava Farm
1. The land allocation for this plantain farm is 2 plots of land
2. The design of the farm should be 2 roles and 2 columns
3. The farm should have water pipes for wetting the plantain.
a. This water can be collected from the wastes / changed / drained of the fish pond to wet the plantain
b. Also the farm should have connected pipes for wetting from the main water supply tank
Wants:
Blocks, dimensions, colours, use of images
Ask for Sample:
can you provide a sample for the first farm
Software:
  1. any

Entries

#4 Farm Plot Allocation by zulfadzryl
Nov 6, 2014 19:56
#2 Farm design by TomyAsa
i will upload the pumpbling design next time it's the sample
more
Oct 21, 2014 23:47
#1 fish farm by feeldesignlab
here i attached the overall concept according to your requirement,and i attached the conceptual layout of fish farming, ,if you have any ammendments,mail me ,because there are lot of detailing works in fish farming itself,it will take more time,please replay me soon.finally even i will made the conceptual 3d layout for you.its good project,very intrested and eco.thank you
more
Oct 12, 2014 15:58

Discussion

Fri, 10 Oct 2014 12:10:05 +0000
I would like to submit a design for your project but the value amount of labor and design that will be needed far exceeds your budget, I would be happy to entertain this project for $3500. please visit my portfolio for samples.

http://www.pinterest.com/redesignusa/redesign-portfolio/

Aaron

Similar Contests on Cad Crowd

Concept for Mega Cruise Port development
We are seeking concepts for a new Cruise port development. We have created the layout of the footprint of the port showing the different elements of the port and their location. we are seeking a modern upscale concept for the port design (Building styles)
Converting a Beach House to Year Round House
We have a 2420 sq ft home originally built in 2003 as a vacation home (small bedrooms, little storage, no office) that we want to move to full-time. It was a modular home and it sits on pilings. It's hurricane rated (and unfortunately hurricane tested!) We hope to reconfigure/reduce our master bath/closet area to utilize dead space, and increase closet space. We need more storage in general. We will likely convert one of the bedrooms downstairs to an office unless there is another solution. The twp says we have about 100 sq ft that we could add - maybe enclose bottom deck with access off family room? the North side of our house are all oversized sliders. Our windows are floor to ceiling. We have great light here. We would like to add dormers to the roof to add architectural interest and to add light to the attic space. We will have to add floors and pull-down stairs to make the attic accessible/functional. We would like ideas on enclosing our outdoor stairs and integrating with exterior (cedar shakes) The kitchen is original builders grade and needs updating. We would consider removing the wall between kitchen and living room. We would love a roof top deck. The ceiling is flat over the master bedroom but pitched slightly in kitchen and living room. Optimize / expand laundry closet. We also would like to add an elevator - and assume it would be external as many people get variances for them here. The most likely place for the elevator would be on the left side of the house by the front door. Lastly the ground floor is garage/storage. The space under the stairs is hampered by a piling and a header that we would like to move to optimize space there. We understand this might require engineering.
Design a Safari Resort
I would like a mock up done for a safari resort. It should contain 8 lodges plus area for entertainment. A fire pit, Infinity edge swimming pool, Eating area for 16 people, parking for 2 vehicles, Kitchen, storage area, laundry. 50KWH Solar farm.
Floor Plan for Industrial/Flex Type Building
Hello. We are looking at building a recreational facility and are currently trying to get an estimate of building costs. To do so, we'd like to get some initial thoughts drafted out on paper regarding the floorplan of the building. We have some hand-sketches, but need someone to put our sketches into a real scale so that we can get a better idea of how things are coming together. Things you should know about our building: - The building will have two large areas for two separate businesses. Right now, we're focused on the large area, which will have a ~7000 sq ft footprint. -We're thinking it makes sense to start with a 70 (wide) by 100 (long) footprint and see how things look. -We will have a second floor overhang of an additional 1750 sq foot or so. -The main floor will have : two multi-stall bathrooms, a reception area, and two rooms (each about 400 sq ft to start) -The overhang area on the "second floor" will have: two offices (~150 sq ft and 225 sq ft, respectively), two smaller bathrooms, an open area, and a lounge (~625 sq ft) + we will need a stair case from the bottom to the overhang. - Once we have the initial layout of the floor plan complete (which will have tons of open space), we'd like to work with the same person to help us start sketching some additional areas out that we know will be used for certain purposes, but won't involve walls or other structural items. We've attached two pictures of our humble sketches. One shows the downstairs/main area and one shows the upstairs overhang. We have strong preferences about certain things (like having the two rooms downstairs) but are less concerned about other things (like where the upstairs bathroom goes).
Separation Wall, Ceilings and Flooring 3D & Sketch Designs
I wish to have internal drawing designs done that can show visually the installation and fixing details when applying our MgO Corp Board products to Timber and Steel Framing Systems as well as roof battening and applied to masonry walls. I would like the detail to note the processes, material, Rw Acoustic Solution of system combination, Single sheet and Combined sheet FRL's performances on a system and combined system R-Values options. We are competing against James Hardie, Boral, CSR in the building products market. Our product out performs all the above structurally, acoustic, impact and fire. We need to now show this in drawings so Engineers, designers, architects, builders, specifiers xyz can clearly and quickly understand the application and installation methods of our products. Our website is: www.mgoboard.com.au and the following is links to technical information MOST IMPORTANT: The detail has to be to a standard an Engineer will sign off on the drawings!!!!!!