Replicate Macbook Pro Cover

Contest Ended, Winner(s) have been selected.
Description:
We are looking for someone to help us replicate a shell case for a MacBook Pro in a CAD format drawing that will function and fit the desired measurements. Our goal is to be able to take this design to a manufacturer for building. This case will include two parts: a top and a bottom. These parts need to be able to be built separately.

Please see attached PDF for measurements

This design should also be flexible enough to be adjustable so we can fit both the 15” and the 13” models. These models will be first produced in a CNC environment so the file must work within those constraints.

The design should not include the bottom leg pads.

The case we are looking to replicate is www.amazon.com/Speck-Products-SeeThru-Raspberry-SPK-A1498/dp/B00937DOEK

We have most of the measurements but a second look would help.


Wants: someone who either has a mac or can get their hands on one to see the coverture on the top and bottom case. Something that will actually can be produced.

Main focus is on the 15" model case.

Extra: additional Money can be earned if also completing the older version of the macbook pro case. also included in the PDF. 2012 version. $50.
Wants:
Design details, and function. It must be a size that will function and fit a macbook pro.
Don't Wants:
something that when made won’t fit on an actual computer.
Software:
  1. AutoCAD
Additional Information
These formats will all work. .bbcd; .cad; .igs; .iges; .sat; .3dm; .sldprt; .step; .stp; .stl; .x_t; .x_b.

Since it will be a 3 dimensional drawings .iges works best. if the software can make that type of format then use it.


Side vents on the 15” and 13” retina displays, I don’t think I mentioned these in my original doc but they are very important as the machines would overheat with these blocked please see the images for measurements and location.
They start about 1” in from both sides of the front bottom of the laptop. And are approximately 1 7/16 inches wide and 1/16 inches deep.
The 15” 2012 model does not have these.

http://images.anandtech.com/reviews/mac/rMBP13/DSC_8944.jpg
http://www.darkstarapps.com/vent1.JPG
http://www.darkstarapps.com/vent2.JPG
http://www.darkstarapps.com/vent3.JPG


Entries

1st Winner
#2 15 inch Mac Book Pro Retina 2013 by CAD SPARKLES
15 inch Mac Book Pro Retina 2013
more
2013-11-18 08:12:19
#1 13 inch Mac Book Pro Retina 2013 by CAD SPARKLES
13 inch Mac Book Pro Retina 2013
more
2013-11-18 08:09:57
#3 Mac Book Pro 15 inch 2012 by CAD SPARKLES
Mac Book Pro 15 inch 2012
more
2013-11-18 08:13:53
#4 First sample by Sergiu.Nasta
2013-11-27 17:19:28

Discussion

Tue, 03 Dec 2013 06:43:54 +0000
Please wait for me tomorrow ++++
Mon, 18 Nov 2013 19:51:13 +0000
Abu Afzal Thanks for submitting all 3 designs, this is the type of work I am looking for exactly.
Thu, 07 Nov 2013 21:13:21 +0000
Hi,

These formats will all work. .bbcd; .cad; .igs; .iges; .sat; .3dm; .sldprt; .step; .stp; .stl; .x_t; .x_b.

Since it will be a 3 dimensional drawings .iges works best. if the software can make that type of format then use it.
Thu, 07 Nov 2013 21:13:18 +0000
Hi,

These formats will all work. .bbcd; .cad; .igs; .iges; .sat; .3dm; .sldprt; .step; .stp; .stl; .x_t; .x_b.

Since it will be a 3 dimensional drawings .iges works best. if the software can make that type of format then use it.
Thu, 07 Nov 2013 06:57:13 +0000
Hi. I could do it in Catia. Hope that will be ok for you. If you have got anymore design specification requirements please feel free to contact me.
Wed, 06 Nov 2013 20:15:58 +0000
That is fine. I just need it to be a format that will work with CNC.
Wed, 06 Nov 2013 10:24:19 +0000
can i upload in pro-e software

Similar Contests on Cad Crowd

Knee-based Travel Mug Holder - New Product Design / Prototype
Commuters on buses and trains don't have cup holders, and so they are left with the balancing act of holding their travel mug in one hand, while trying read the paper or work on their laptops with their other hand. This sucks, causes spills, and is super uncomfortable. Commuters need something that's compact and foldable that can then open and attach comfortably to their knee (or another body part?) that will securely hold travel mugs of different sizes.
wallet clip for keys/key fob/cash&CC/ headphones
As seen in the sketchup images, this rectangular clip functions as a wallet and clips onto the opening of a front pants pocket (an example is shown in photo's). I need YOUR help in finding an ergonomic & functional solution to securing a car key FOB to the clip as well as sourcing pro CAD files that can be sent to a CNC machining facility.
Redesign project for liquid infusion system | CAD freelancer crowdsourcing
I need the project redesigned to look more sleek and sexy, Clean lines with Rich but subtle colors. Tested in motion to be fully functional, with no leakage when manufactured to specs. Be very Creative in the design process plz,
Cool Enclosure Design for Audio Equipment
Looking for a good looking Enclosure for my DIY noise filter used on my audio equipments. *The filter size is 59 x 20.5 x 13cm *There must be a way to secure my filter inside the enclosure without drilling/gluing. Screws etc are ok to re-enfore it. *There needs to be two holes for the cable input and output. *Prefer it can be made from metal/CNC-able.
Need iPhone Case Design
Looking for a Nice Luxury Design for a New iPhone I am going to manufacture Our last designed case featured Gold plastic frame around the case and Genuine black leather on the back of the case, with our Ariza Imperial Logo engraved on the back of the leather Last case was for the Back of the iPhone only I am now looking for a protective "LUXURY" style case that covers the whole phone (Front & Back) File needs to be in 3D Max format