Foldable stand

in Interior Design held by Manni
Contest Closed
Description:
A foldable Stand for a platform using the following friction hinges
for the top connection:
3000-0001-HNG L
3000-0001-HNG R
for the bottom connection:
3000-0501-HNG
3000-0501-HNG

which you can find on this side:
www.hanayainc.com/3000series.htm

All material is Alluminum
The top platform should be an aluminum grate, see picture.
Wants:
Quality of the design.
Lean design. Design to manufacture.
Useage of the right components
Useage of the 4 hinges
Don't Wants:
Unnecessary material and weight.
Complex built up
More than 3 parts besides the hinges
Ask for Sample:
Please send me a design sketchup upfront.
Software:
  1. SolidWorks

Entries

#8 Stand3 by Kristian
As before I'm attaching archive of solidworks and .step format of the assembly.In this design you can rise the strength by thickness of the sheet.
more
Nov 15, 2013 20:58
#7 Stand4 by Kristian
I attached an archive including assembly in solidworks and step format.Also I simulated all parts(excluding hinges),so its can take enforcement of 5kg(50N) distributed load on plate,without collision with maximum displacement less than 1 mm(the most displacement is on the top of the plate).
more
Nov 15, 2013 20:53
#6 Foldable Stand by CAD SPARKLES
Foldable Stand
more
Nov 10, 2013 9:48
#4 Foldable stand by Kristian
If it's need,I'm open for further co-operation with you(if you pick my design,there's no problem to modify or change or no matter what you wish,I'll do what I can).
P.S.I've already attached an archive with old solidworks file you need and version of it in .stp.
more
Nov 9, 2013 18:48
#2 Foldable stand by Petar Nestorov
Nov 7, 2013 12:44
#1 Foldable Stand by Rhizky Ariyansyah
I use material flat bar aluminum 4,5x25
I use hings type 3000-0001-HNG L, 3000-0001-HNG R, and 3000-0501-HNG
more
Nov 7, 2013 3:08

Discussion

Manni

Buyer

Wed, 06 Nov 2013 18:47:38 +0000
Hello Yogi and Jiang,

yes pro-e is solidworks compatible.

According to the specifications of the hinges, the torque should be sufficient, so please don't add more supports.
Please feel free to email me any time at ******


Best regards,
Manni
Wed, 06 Nov 2013 04:06:40 +0000
can i upload pro-e software

AZ Jiang

Designer

Tue, 05 Nov 2013 07:33:44 +0000
Based on your description, I made ​​a simple sketch initially, (please tell me how I can send you the sketch drawing), but I have question here, these friction hinge's torque is enought to support this stand? do you allow a extra support? Best regards,

Manni

Buyer

Sun, 03 Nov 2013 20:50:19 +0000
The numbers in the sketch are mm.

Similar Contests on Cad Crowd

Drafting
I will do this file with my experience
REFLECTION OF ME
required - walk-in wardrobe, relax corner and a bed area. Luxury and cozy feel Amber green is my favorite color
Paris apartment
I bought a new apartment in Paris, 2 bedroom with 60sqm. We'd like to get proposals on how to organize the space, and for interior design. We don't have a preference for the software. One of our question is whether we should move the Kitchen inside the living room, or perhaps switch it with the bathroom. That way we could also use the corridor space to have a bigger master bedroom. In terms of style, we're open to various styles. Maybe industrial, or vintage, or else. Ceiling height is 2.45meter
Fireplace remodel
Need a design mock-up for a fireplace remodel, with dimensions. As pictured, the existing mantel is 13 ft long; the wall is 17 ft long and just over 8 ft tall. Want a wooden mantel, probably with new cabinets on either side of the fireplace. Would like the fireplace front to be a reddish aged brick, as pictured in the column, although I'm open to new ideas on the fireplace front, and the hearth (floor area in front of fireplace). TV will be mounted above mantel, which leans me toward wanting a larger mantel to offset the size of the TV.
Universal Quad Senior Home
Translate softline sketches to AutoCAD.