CAD Design of Secure Rubber Tube Connection to Plastic Inserts for Fitness Equipment Blind
in
CAD Design
held by
levanr
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
We need a CAD model that includes the best method to securely attach rubber tubes (5mm thick) to EXISTING plastic inserts, preventing detachment under tension while allowing easy replacement when needed.Use current insert and connect it to rubber tube.
See insert cad, with other images and current connection idea on drive.
drive.google.com/drive/folders/14y4-6PHV0ohddv1IBpzEm8K5aFT2uhvX
Wants:
Easiness of manufacturingEasiness of use
Ability to create durable solution
Using existing parts for example pins etc
Proving that under tension it will not come out
Don't Wants:
Helicopter engineToo complicated cad
Additional Information
Rubber gets stretched during workout so it is important new ideas not to cause tears in rubber. New pin or connection design should be easy to exchange, lets say if you have created a pin, it should have space for nails to take it out from insert.
Prepaid Prize
Entries
1st Winner
#10 secure rubber concept 2 redesign
by joshuajaiyeola
Hidden design
Download Files
#9 SECURE RUBBER ATTACHMENT CONCEPT 2
by joshuajaiyeola
Hidden design
Download Files
#3 Spiked Cone
by eduardoj1
Hidden design
#7 SECURE RUBBER ATTACHEMENT.
by joshuajaiyeola
Hidden design
Download Files
#8 SECURE RUBBER ATTACHEMENT
by joshuajaiyeola
Hidden design
Download Files
#14 CAD Design of Secure Rubber Tube Connection to Plastic Inserts for Fitness Equipment
by sherifelsheikh
Hidden design
#13 3d cad model of connector
by clintsar
Hidden design
Download Files
#12 New Internal Insert To Secure Connection Without Slipiing
by MechArt3D
Hidden design
Download Files
#11 Cone with recessions
by eduardoj1
Hidden design
#6 Lock insert plastic
by Manp
Hidden design
#5 INSERT
by SANTOSHV
Hidden design
#4 Rubber tube
by ramanas3
#1 Tube Insert
by EthanHunt
Hidden design
#15 CAD Design of Secure Rubber Tube Connection to Plastic Inserts for Fitness Equipment
by sherifelsheikh
Hidden design
#16 Secure Rubber Tube & help to stop the movement
by mdIBRAHIM18
#17 Fit Lock Design
by erifahmetc
Hidden design
#18 NR Design-Plastic Inserts for Fitness Equipment
by nitesh_mark15
Hidden design
#20 insert design
by sanketgopale
Hidden design
Download Files
#21 Flex Tube Collar
by antoniojd2001
Hidden design
#22 Secure Rubber Tube Connection to Plastic Inserts
by silverrd
Discussion
#20 hi, please give your feedback for improvements
Hi, what is the inner diameter of tube
Tengo una idea, ando trabajando en ella
Hi! Would you please provide more context? What about constraints? Is clamping of the tubes allowed? Should the plastic insert position be adjustable past the blocking position if needed? Thanks
Similar Contests on Cad Crowd
Stackable dresser
I have provided a basic design of a piece of furniture that I would like to provide to a CNC fabricator to be cut out for assembly. I need my Powerpoint sketches turned into a 3D design and the component pieces layed out for cutting on the two pieces of plywood to be used. This design will be sent to the CNC fabricator for cutting.
4 simple CAD 3D print ready items required (drawing supplied) - ongoing work
We have 4 items that we can knock up in sketch up in about an hour. However, sketch up doesn't handle recesses or chamfer very well.
We are looking for these 4 items (2 are incredibly simple) to be made print ready for us to print, test and revise.
3D CAD Revision Of Skull & Snake
I need a simple revision of this design. It was created in SolidWorks but I guess it can be revised in any 3D CAD software
as long as the file is saved .STEP.
A mold will be made from this in a CNC Milling Machine but as it is now can't be made because there is a space between the snakes body and the top of the skull. The body of the snake has to move down. See attachment 2 for exact position.
You can download the original STEP file to work on. It is the first attachment but might take a few minutes as it is a large file.
Hydroplane Challenge
I have made a prototype of the attached drawings but the gears didn't have enough torque and the wheels slipped on wet floors.
I made the following changes to the prototype I built:
1. I duplicated the front Wheels (Part #23) to replace the back wheels (Part #3)
2. I duplicated the Roller GearWheel V2 (Part#9) to make the back wheels work the same as the front wheels
3. I duplicated the Reducing Gear (Part #24) to connect the new back wheels to the gear mechanisms
The gear torque works great now but the 4 wheels still don't have enough surface contact to stop slipping on the wet floor. I believe all 4 wheels need to be wider to have more surface contact to stop them from slipping (hydroplaning).
Challenge:
I need the wheels to (#23) to be as wide as possible and change as LITTLE as possible to the rest of the parts and avoid extra costs.
I am pretty sure I will need to re-print the Reducing Gear (#24) to make the wider wheels work with them.
If I have to adjust the holes on the Plate (#7), I would like to do it with a drill instead of reprinting them.
I am hoping there will not be any changes needed to Roller GearWheel V2 (#9)
CAD Drafting Electrical Design
CAD File Markups
See attached 7 Electrical CAD Files,
also see attached the construction handwritten mark-ups.
CAD Files to be revised to new version with the mark-ups.
Return copy of CAD File and PDF of the 7 files.
Need completed this weekend, thanks!
sanketgopale
Designer