Celtic pocket watchBlind

in 3D Printing Design held by wiseguybec
Contest Ended, Winner(s) have been selected.
Description:
A 3d pendant in the shape of a pocket watch. It should come in two pieces, top and bottom.

The radius shall be ca. 4 cm and the depth 1,8cm.

There needs to be a 1,8 cm round hole in the top half, where a gem will be fitted. This case will be 3d printed in ceramic, so it is light enough to be carried around a ladies neck. The casing does not need to be closed, and it should follow Celtic knot designs. See attached for inspiration.
Wants:
pendant in two pieces, like pocket watch.
radius 4 cm, depth 2,8 cm.
Material ceramic.
Clear gemstone in center of top half.
Celtic design.
3d printable.

Entries

2nd Winner
#18 celtic 6 by Jim81
May 30, 2019 18:34
#17 celtic-5 by Jim81
please read attached txt file
more
May 30, 2019 18:33
#19 celtic 7 by Jim81
Modifications as requested
more
May 30, 2019 20:05
#22 celtic pendant by AlvinD
Attached is the start of my submission. Please rate, so that I know whether or not I should continue down this path or take another approach. My initial thought for the back half is for it to be a mirror of the front, minus the cutout.
more
May 31, 2019 6:22
#29 Celtic pocket watch by REDA
;)
more
Jun 1, 2019 23:34
#36 Cel_Pock_Wa by Marcos A.
The Cel_Pock_Wa is a simple design based on the required measurements, to be manufactured by 3D printing and with recognizable Celtic shapes.
more
Jun 3, 2019 18:57
#39 celtic 8 by Jim81
Jun 3, 2019 21:43
#1 celtic-1 by Jim81
May 27, 2019 14:00
#2 celtic-2 by Jim81
May 27, 2019 14:13
#8 Celtic-4 by Jim81
With new dimensions, all previous entries will not work.
more
May 29, 2019 2:15
#9 My Concept_1 by Eira
May 29, 2019 18:33
#10 My Concept_2 by Eira
May 29, 2019 18:34
#20 Celtic pocket watch design by Abid Yusuf
Hi,
Looking forward for your feedback so that I can undertake further development.
more
May 30, 2019 20:19
#21 Respeto by REDA
;)
more
May 30, 2019 22:09
#37 Celtic pendant design by Abid Yusuf
Hello,
I have provided .igs files for hassle free analysis of the design in any 3d modelling software, 3d print ready top and bottom of the design in .stl format. If you need any other file format please do let me know.
I have provided two exploded views so that you can make out the dimensioning and the structure better this time.
I have provided a few more renderings of different appearances in ceramic, please look them up to as they might appeal you. I hope I have delivered what you were looking for.
more
Jun 3, 2019 20:05
#38 Celtic pocket watch by Mahbub
Thanks.
more
Jun 3, 2019 20:33
#5 Celtic pocket watch #MODEL 1 by RRM
May 28, 2019 19:54
#25 Celtic pocket watch mk1 by Endoxos
Initial design, Is there any misunderstanding based on your request?
more
Jun 1, 2019 8:45
#26 Celtic pocket watch mk1.1 by Endoxos
Initial design, Is there any misunderstanding based on your request?
more
Jun 1, 2019 8:55
#49 Ceramic Celtic Pocket Watch or Necklace Design by palezyan3d
Ceramic 3-d printable necklace or pocket watch with the Celtic knot design pattern creating a circle to represent the never-ending cycle of life.
4 cm in diameter. With a 1.8 diameter hole in the center (for a gemstone option) surrounded by the Celtic knots.
Can be modified and designed to fit other requested variations and sizes.
more
Jun 5, 2019 5:14
#50 Ceramic Celtic Pocket Watch or Necklace Design by palezyan3d
These are the STL files in case you wish to 3D-print them right away.
Please let me know if you need anything else.
Thank you for your time and consideration.
more
Jun 5, 2019 5:23
#11 My Concept_3 by Eira
May 29, 2019 18:41
#32 Celtic watch pocket by SML95
This is my new design, it is made of two pieces with a hole that allows you to insert the gem in it.
Looking forward to hearing your feedback.
more
Jun 2, 2019 16:18
#34 Celtic Pocketwatch pendant by Byonyx
This pendant is designed for direct 3D printing on an SLA style resin printer. I've attached a native .3dm file as well as .stp. and .obj, but have also added ready to print .stl files.
The pendant is in the correct scale of 4cm wide by 1.8cm depth. I've added a celtic detail on the inside of the locket for extra interest, and have created a hinge and snap lock design.
more
Jun 2, 2019 23:01
#3 pendant by Emadsolitan
hello sir , please check attached pictures and STL file , i can modify it if needed
more
May 28, 2019 6:16
#4 pendant by arber.faca
I have it in 3D in SOLIDWORKS . Please tell me if you have anything unclear
more
May 28, 2019 19:49
#15 Celtic Pocket Watch Pendant by LickuidCAD
Feedback is appreciated, and if you require any modifications I'm available.
more
May 30, 2019 12:36
#16 Celtic pocket watch by SML95
Hello,
This is my first design for the project, looking forward to hearing your feedback.
more
May 30, 2019 15:02
#6 Celtic pocket watch by REDA
;)
more
May 28, 2019 22:03
#7 Celtic pocket watch by REDA
;)
more
May 28, 2019 22:13
#24 celtic pocket watch pendant by Abid Yusuf
second upload for the same design. waiting for your feedback.
more
Jun 1, 2019 8:21
#40 Celtic-9 by Jim81
Jun 3, 2019 21:43
#41 celtic 10 by Jim81
Jun 3, 2019 21:44
#42 celtic-11 by Jim81
Jun 3, 2019 21:45
#43 celtic-9 by Jim81
Jun 3, 2019 21:47
#44 cletic-11 by Jim81
Jun 3, 2019 21:49

Discussion

arber.faca

Designer

Wed, 29 May 2019 20:37:24 +0000
YES I HAVE BER DIAMANT WITH LARGE SIZES 3.2. BUT CAN MODIFY

wiseguybec

Buyer

Wed, 29 May 2019 14:50:42 +0000
diameter of gem is 1.8

SML95

Designer

Wed, 29 May 2019 12:53:33 +0000
hello,
what is the diameter of the gem that will be fitted in the hole?

wiseguybec

Buyer

Tue, 28 May 2019 17:51:08 +0000
i made error: diameter is 4cm, not radius. Depth is 1,8cm
Tue, 28 May 2019 16:11:58 +0000
does it need any (hook/lock) requirement for fitting gem stone?

wiseguybec

Buyer

Tue, 28 May 2019 05:22:54 +0000
yes, it should be hollow, like pocket watch or locket.

Jim81

Designer

Mon, 27 May 2019 21:32:46 +0000
Is there a reason for it to be in two pieces, just curious since it will be heavier. Do you want it to be hollow ?

wiseguybec

Buyer

Mon, 27 May 2019 12:22:13 +0000
It should be a pendant, which can be worn as necklace or strung around wrist like bracelet or act as keyring...
Mon, 27 May 2019 05:03:43 +0000
will this be a necklace or a watch or a combination of the two?

Similar Contests on Cad Crowd

Super 8 film reel
I have the design made, looking for someone who can print it. Includes the reel and a core adapter. Looking for 6 of these. Maybe do more if they turn out well. 1st prize is 250 for 6 reels/core sets printed.
Dental Tool
Mass produced plastic tool for dental product. My immediate need, however is to have 3-D prints made for evaluation. I'd also like to use the same file for manufacturing. Plan of tool, logo file, detail of head and pic of possible diamond-pattern knurling grip attached.
"They Might Be Giants" School Award
I am a local community member working with a K-8 school principal to develop a custom award for two members of their faculty to be given out each year. The award is called "They Might Be Giants" and it celebrates educators who have been the "shoulders" that younger educators have stood on. Think like a mentor, but more than that. Ultimately the creation from this contest will be 3D Printed and integrated into the final award. Think 6" - 8" high 3D giant. I'm open to ideas, but the attached pictures provides a good references of the giant idea and it supporting people on its shoulders. If you notice the male and female standing on the giant's shoulders in the reference photo you get a sense of them looking into the horizon. Where the Giant has a sense of forward motion. It is the combination of the sense of movement toward the horizon, and the eagerness to look toward the future that I to capture with this 3D element. The working concept for this award is based on an award presented by the Advertising Hall of Fame called "The Golden Ladder" Award (See attached photo). In place of the golden ladder will be the giant element that this contest is looking to produce. The total height from the foot of the giant, to the top of the tallest head of the person standing on the giant's shoulders will be no more than 8" high
Animilastic Logo for 3D Print
I want to print mini sculptes and otherthings out of a 3D print for my ultimate frisbee team. So i want to turn the dogs head from our logo to a 3D character (also only the head)
Russian Doll Maze Variant
Hello Designers! I am looking for a variant of the "Russian Doll Maze Puzzle" on Thingiverse. Here's a little bit about the project: I run a small home business in Utah that provides 3D printing services for the local area. Lately, we've been donating our extra machine time to making these puzzles for charity (Anti-boredom bags for children in hospital waiting rooms.) They've been a massive hit among the kids, however we've been hearing that the locking mechanism is 'unsnapping' over time while the puzzle is assembled, making them inoperable. We'd like to remedy that for the future! A few required design change specifications: 1. Cylindrical instead of Octagonal 2. The maze "Locking" mechanism needs a fix. Currently, it snaps "Up" into position, however the clicking mechanism is small and wears down, resulting in older puzzles 'locking' inside because they've come undone. We're looking for innovative solutions to solve this issue (potentially rotating sideways at the end, instead of up, to add another safety mechanic) 3. Thick bottom and outer wall for embossing names, if chosen. Needs to be strong enough for children to not break with regular usage. 4. Difficulty of maze appropriate to 8 and up age levels. Dimensions overall approximately 4" height, 2 1/2" round. 1/8" to 5/16" inner wall construction (solid).