WF-19 Welded Steel Workbench Frame: Deflection Check and Cut List (Concept Study)

Concept study (self-initiated, not client work). A 1500 × 700 × 900 mm workbench frame in S235 square hollow section, MIG welded. - The long top rails are checked as beams between the legs under a 300 kg load, against an L/360 deflection limit for a work surface. The legs are checked for buckling. - Rev A in 30 × 30 × 2 tube sags 9.3 mm. Rev B in 40 × 40 × 2 tube deflects 3.56 mm, inside the 3.9 mm limit. - A mid cross rail supports the top sheet and keeps the frame square. I didn't count it as support for the long rails, because nothing holds it up. - Cut list for the fabricator: 12.5 m of tube (3 × 6 m bars), frame about 30 kg. Deliverables: STEP, beam check, cut list, and renders. Software: FreeCAD, Blender.
structural mechanical-design workbench steel-fabrication cut-list welded-frame