WD-35 Welded Cantilever Arm: Fillet Weld Sizing (EN 1993-1-8 Simplified Method) (Concept Study)

Concept study (self-initiated, not client work). A workshop tool-support arm: RHS 60 × 40 × 4 (S235), 400 mm long, fillet-welded to a 10 mm end plate and bolted to a column. - Design load 2.5 kN × 1.5 at the tip. - The weld is treated as a line (throat = 0.7 × leg), with bending and shear combined against fw = 208 MPa. - Rev A welds only the two vertical sides with a 3 mm fillet, giving 595 MPa (about 3× over). - Rev B runs a 5 mm fillet all round, giving 119 MPa. - The RHS itself sees 130 MPa and deflects 0.74 mm at the tip. Deliverables: STEP assembly, weld calculation, and renders. Software: FreeCAD (model + calculation script), Blender.
fabrication mechanical-design structural-steel eurocode engineering-calculation weld-design