SP-18 Compression Spring for a Push Latch: Rate, Stress and Buckling Calculated (Concept Study)
Concept study (self-initiated, not client work).
A music-wire compression spring for a push-to-open latch, with closed and ground ends.
- Rate, working forces, Wahl-corrected stress at solid height and buckling, all from the standard spring equations.
- Rev A (0.7 mm wire, 32 mm free length, unguided) would reach 1356 MPa at solid, above the 1048 MPa (45 % of tensile strength) that avoids permanent set, and is slender enough to buckle sideways.
- Rev B (0.9 mm wire on an 8 mm mean diameter, 8 active coils, 24 mm free length) is at 775 MPa against 1010 MPa, gives 15.9 N when pressed, and runs on a guide pin.
Deliverables: STEP of the spring and guide pin, the spring calculation with a force-deflection chart, and renders.
Software: FreeCAD, Blender.
Published