SN-7 Snap-Fit Sensor Enclosure: PC/ABS, No Screws, Snap Strain Calculated (Concept Study)

Concept study (self-initiated, not client work). A two-part enclosure for a small IoT sensor board. The cover clips onto the base with four cantilever snaps, so there are no screws. Designed for the mould - 2 mm PC/ABS walls, four PCB bosses, vents and a light-pipe hole in the cover. - Each hook is formed through a small window in the cover, and each catch through a slot in the base floor. Neither part needs side actions. Snap strain, calculated - Rev A had short, straight 7.2 mm beams. At 0.8 mm deflection that's 3.5 % strain, above the ~2 % PC/ABS can take repeatedly. - Rev B uses 12 mm beams tapered to half thickness at the hook: 0.85 % strain. The cover goes on with about 25 N in total and can be opened again. - Method: the standard cantilever snap formulas (ε = 1.09·t·y/L² for a tapered beam), with E = 2.3 GPa and μ = 0.5. Deliverables: STEP for both parts, snap calculations, and renders. Software: FreeCAD (CAD + calculation script), Blender (renders).
product-design injection-molding dfm snap-fit enclosure-design pc-abs