Sealed Optical Sensor Housing on a Kinematic Mount, with GD&T Drawing

Sealed optical sensor housing in machined aluminium, on a three-ball kinematic mount, with a GD&T drawing. Housing 110 x 80 x 66 mm in 6061-T6, black anodised, with the optical axis 32 mm above the mounting plate Kinematic mount: three 10 mm steel balls in the housing floor sit in three 90 degree V-grooves on a 34 mm radius in the base plate (Maxwell coupling). One sprung M6 screw preloads it, so the housing can be removed and refitted in the same position Ball sockets are blind, under a 9 mm floor, so the sealed chamber stays closed Lens cell with two elements on a 25 mm H7 bore in a machined bulkhead, held by three M2 screws Image sensor on an Invar 36 plate with three push-pull adjusters (spring and screw) for focus, tip and tilt Sealing intended for IP67: lid O-ring in a machined groove, a face-sealed 32 mm sapphire window clamped by a retainer, and an IP67 M12 connector Four elastomer isolators under the base. With an assumed 40 N/mm each, the mount resonance is about 51 Hz Thermal note: the lens cell to sensor path is 61 mm of aluminium, about 1.4 micron of focus shift per degree C. If the depth of focus is tighter, an Invar spacer is the next step GD&T summary to ASME Y14.5: datum A is the bottom face, B the ball socket pattern, C the lens bore. Lens bore parallel to A within 0.01 mm and positioned within 0.02 mm All parts checked against each other in 3D for zero overlap. About 1.56 kg Files: STEP of the body, lid, base plate, lens cell, window retainer and sensor plate, STEP of the full assembly (opens in SolidWorks, Fusion 360, Inventor, Creo and Onshape), a drawing with three views, a section on the optical axis, the kinematic plate and the GD&T summary (PDF and DXF) and presentation renders. This is a design study. The lenses, sensor, board and isolators are placeholders, the isolator stiffness is an assumption, and no FEA or tolerance stack-up has been run. The seal has not been tested, so IP67 is a design intent, not a rating. The model is parametric, so the housing size, axis height and kinematic radius are quick to change. Message me if you need a precision housing or mount drawn with datums and tolerances.

Files (12)

License: CC - Attribution - Non-Commercial Learn more
step mechanical-design technical-drawing cnc-machining parametric-design precision-machining gdt sensor-housing optical-housing kinematic-mount sealed-enclosure ip67