PC-22 PCB-to-Enclosure Fit: ECAD-MCAD Clearance Check and Board Outline DXF (Concept Study)

Concept study (self-initiated, not client work). A sensor PCB checked against the SN-7 enclosure before layout is frozen. - Minimum 3-D clearance from every component to the base, cover and snap beams, against a 0.5 mm target, plus whether the USB-C lines up with its wall opening. - Rev A: an upright 10 × 16 mm capacitor runs into the cover (119 mm³ overlap), and the USB-C sits 1.2 mm off its opening. - Rev B lays the capacitor on its side and centres the USB-C. Every part now clears by at least 1.6 mm. - The board outline, mounting holes and keep-out zones under the snaps are exported as a DXF for the PCB designer. Deliverables: STEP assembly, board-outline DXF, clearance report, and renders. Software: FreeCAD (clearance script), Blender.
pcb electronics product-design enclosure-design ecad-mcad clearance-check