MB-10 NEMA 23 Motor Mount: CNC 6061 Bracket with FEA, Gussets vs No Gussets (Concept Study)
Concept study (self-initiated, not client work).
A one-piece motor mount for a NEMA 23 stepper, machined from 6061-T6, for belt-driven machines.
- 38.1 mm pilot bore, NEMA 23 screw pattern, slotted base for belt tensioning.
- Static FEA in FreeCAD/CalculiX with a 300 N belt pull and the base fixed, comparing two revisions on the same colour scale.
Results
- Rev A (no gussets): peak 3.3 MPa, deflection 0.0132 mm.
- Rev B (two gussets): peak 1.9 MPa, deflection 0.0035 mm, which is 3.7× stiffer for 34 g more aluminium.
- Both are far below yield (276 MPa), so what the gussets buy is stiffness (belt alignment), not strength. I say so rather than oversell it.
Deliverables: STEP, FEA study, and renders.
Software: FreeCAD (CAD + FEM), CalculiX, Blender.