LH-33 Toy-Chest Lid Support: Torsion Spring Design So the Lid Can't Slam (Concept Study)
Concept study (self-initiated, not client work).
A spring-balanced lid for a plywood toy chest: two torsion springs on the hinge line carry 80 % of the lid's weight, so it drifts shut instead of slamming.
- Lid: 2.46 kg of 18 mm birch ply, 4.2 N·m when closed.
- Spring rate from k = E·d⁴/(64·D·n), stress with the Ki curvature factor, and allowable 0.7 × UTS for music wire.
- Rev A (2.0 mm wire) reaches 2369 MPa against 1400 allowed.
- Rev B (3.0 mm wire, 23 coils) reaches 702 MPa for the same torque.
- Net closing torque falls to 0.84 N·m, and the lid stays open on its own above about 56°.
Deliverables: STEP assembly, spring calculation, torque chart, and renders. Concept only, not a safety certification.
Software: FreeCAD (model + calculation script), Blender.
Published