IF-32 Press Fit, Steel Shaft in Aluminium Hub: Lamé Interference-Fit Calculation (Concept Study)
Concept study (self-initiated, not client work).
A keyless press fit of a 12 mm steel shaft into a 6061-T6 aluminium pulley hub, sized with the Lamé thick-cylinder equations and ISO 286 limits.
- Two checks: hub stress at maximum interference (yield SF ≥ 1.25), and torque grip at minimum interference (≥ 9 N·m, i.e. 1.5 × 6 N·m).
- Rev A (H7/s6, 18 mm hub OD, 15 mm long) reaches 228 MPa von Mises in the hub, an SF of 1.21.
- A thicker hub alone doesn't fix this, because it raises the contact pressure.
- Rev B (H7/r6, 24 mm OD, 25 mm long) reaches SF 1.35 and grips 11.0 N·m at the loosest fit. Pressing needs up to 12 kN.
Deliverables: STEP, fit calculation, and quarter-section renders.
Software: FreeCAD (model + calculation script), Blender.
Published