HK-6 Under-Desk Headphone Hook: Designed for 3D Printing Without Supports (Concept Study)

Concept study (self-initiated, not client work). A screw-on headphone hook for the underside of a desk, designed for FDM printing: it prints with no supports, no post-processing, and in one piece. Design for printing - The hook prints on its side, so the J profile lies flat. The layers then run along the hook and carry the bending load in-plane, which is the strong direction for FDM. Printed upright, the hook would be likely to split between layers. - The screw holes end up horizontal, so they are teardrop-shaped with a 45° roof, and so are the countersinks, which normally print badly. - The bed-side edges have 45° chamfers instead of rounds, which also reduces elephant's foot. The top edges keep their rounds. Checked, not assumed I wrote an overhang check that runs on the FreeCAD model in print orientation. Rev A (round holes, rounds on both faces) needed 382 mm² of support. Rev B needs none. The only thing left is about 1 mm² of mesh facets in the first layer, which needs nothing. Print size: 88 × 78 × 24 mm. Material: PETG or ASA (PLA can creep under a constant load in a warm room). Fixing: two 4 mm wood screws. Deliverables: STEP, a print-ready STL in the correct orientation, and in-use and printing renders. Software: FreeCAD (CAD + overhang check script), Blender (renders).
3d-printing product-design product-rendering fdm design-for-additive headphone-hook