FP-23 Flat-Pack Plywood Stool: CNC Slot-Together Design and Sheet Nesting (Concept Study)
Concept study (self-initiated, not client work).
A stool CNC-routed from 18 mm birch plywood. It slots together with no glue or screws.
- Slots are cut 18.6 mm wide, because 18 mm ply varies by about ±0.4 mm. Dog-bone relief goes in at CAM, since a router bit can't cut a square inside corner. I'd still cut a test joint from the actual sheet first.
- The seat takes a 120 kg centre load at 5.1 MPa (safety factor about 12 against birch ply's bending strength) and deflects 0.5 mm.
- Sheet nesting on a 2440 × 1220 board with the same packing routine: rev A fits 4 stools per sheet, and rev B turns the legs 90° to fit 5, so 20 % less plywood per stool.
Deliverables: STEP, nesting layout, and renders.
Software: FreeCAD (CAD + nesting script), Blender.