Flat-Pack Plywood Base Cabinet with CNC Nesting Sheet and Cut List
Flat-pack 600 mm base cabinet in 18 mm birch plywood, drawn for cutting on a CNC router.
600 wide x 560 deep x 720 high: two sides, bottom, two top rails, toe kick, adjustable shelf, 6 mm back and a full-overlay door
Sides machined on the inside face with 5 mm shelf-pin holes on a 32 mm pitch and clearance holes for confirmat screws into the bottom and rails
Door with two 35 mm hinge cups, 13 mm deep, and a 2 mm gap all round
All eight 18 mm parts nested on one 2440 x 1220 sheet with 10 mm between parts, using 65 percent of the sheet. The right side is nested as a mirror image of the left
Cut list with the size, quantity and machining for each part
Panels checked in 3D for zero overlap, and the shelf sits exactly on its pin row. About 25 kg
Files: the CNC nest as a 1:1 DXF and as STEP, STEP of every panel and the assembly (opens in SolidWorks, Fusion 360, Inventor, Creo and Onshape), a shop drawing with elevations, cut list and nest (PDF and DXF) and presentation renders.
Toolpaths depend on your machine and cutter, so the DXF carries geometry only. The model is parametric: width, depth, height, material thickness and shelf positions are quick to change, and the nest updates with them. Message me if you need cabinets, wardrobes or other panel furniture drawn for CNC cutting with shop drawings.
Files (14)
License:
CC - Attribution - Non-Commercial
Learn more
Published