EX-20 Aluminium Extrusion Profile: Heat-Sink Rail with Section Properties and Die Check (Concept Study)

Concept study (self-initiated, not client work). A finned heat-sink rail extruded in 6063-T5 aluminium, with T-slots underneath for M4 hammer nuts. The profile is supplied as a DXF. From the CAD profile - Area 541 mm², 1.46 kg per metre, Ixx 3.9 cm^4 and Iyy 18.9 cm^4, circumscribing circle 72 mm (which sets the press size). Die check - The tongue ratio (fin height ÷ gap) decides whether a standard die can make it. Rev A's 9 fins with 5.9 mm gaps reach 4.1, which needs a special die that breaks more often. - Rev B's 6 fins with 9.9 mm gaps are at 2.4, inside the ≤ 3 guideline for a standard die. Deliverables: STEP, profile DXF, section properties, and renders. Software: FreeCAD, Blender.
mechanical-design dfm extrusion-profile heat-sink aluminium-extrusion 6063