CM-28 Plate Cam with Roller Follower: Cycloidal Profile and Pressure-Angle Check (Concept Study)
Concept study (self-initiated, not client work).
A plate cam driving a translating roller follower for a small packaging-line pusher: 20 mm cycloidal rise over 120°, dwell, cycloidal return and dwell.
- The cam profile is generated point by point from the motion law and offset by the roller radius, not sketched.
- Rev A with a 15 mm base circle reaches a 32.8° pressure angle, over the usual 30° limit for a translating follower, so it would jam the guide.
- Rev B with a 30 mm base circle peaks at 22.9°. No undercut (minimum pitch-curve radius 35 mm against a 6 mm roller).
Deliverables: STEP assembly, profile points, pressure-angle chart, and renders.
Software: FreeCAD (profile generation + checks), Blender.
Published