BT-5 Insulated Bottle: CAD Model and Amazon Listing Image Set (Concept Study)
Concept study (self-initiated, not client work).
A 750 ml double-wall stainless bottle, built as a full CAD model and then turned into a set of images ready for an Amazon or Shopify listing.
The model
- Body: 0.5 mm outer wall, 2.6 mm vacuum gap, and 0.4 mm inner wall, joined at the neck. The outside is powder coated.
- Capacity is calculated from the CAD cavity rather than estimated: 754 ml to the shoulder (779 ml brim-full), sold as 750 ml.
- Size and weight also come from the model: Ø 74 × 280 mm with the lid, about 470 g.
- PP screw lid with a carry loop, and a silicone seal on the neck face. The 45 mm mouth is wide enough for ice cubes.
- The thread is modelled as simple rings for the renders. On a real job the bottle finish comes from the supplier's standard.
The listing set (5 images)
1. Main image: the product only, on pure white, as Amazon requires.
2. Dimensions and capacity: every number is taken from the CAD model.
3. Cutaway showing the double wall, with a zoomed inset.
4. Colourways: five powder-coat colours from the same model.
5. Exploded view of the three parts.
Because the images come from the CAD model, a new colour or a lid change is a quick re-render, with no reshoot.
Software: FreeCAD (CAD, capacity and mass), Blender (renders).