BJ-27 Bolted Gearmotor Mount: Bolt Preload and Friction-Grip Joint Check (Concept Study)
Concept study (self-initiated, not client work).
A gearmotor adaptor plate bolted to a 10 mm steel bracket with 4 bolts on a 66 mm square. The joint has to carry a 1.5 kN belt pull and a 20 N·m torque reaction by friction, so the bolts never slip into bearing.
- Preload at 75 % of proof load (class 8.8), tightening torque from T = K·F·d, with a 1.6 tightening factor for torque-wrench scatter.
- Rev A with 4 × M4 gives a slip safety factor of 0.77, so the plate would slip.
- Rev B with 4 × M6 8.8 at 10.9 N·m gives 1.76, above the 1.5 minimum.
Deliverables: STEP assembly, bolt calculation, and renders.
Software: FreeCAD (model + calculation script), Blender.