About this service
Send me your product idea, sketches, reference photos or a rough 3D file, and I will turn it into a manufacturing-ready plastic part or enclosure, designed for injection moulding from the first sketch so it is easier and cheaper to tool later.
Why clients choose this service:
- Designed for manufacture, not just to look good: uniform wall thickness, draft angles, ribs, bosses and sensible parting lines are built in from the start
- Fewer prototype and tooling surprises: snap-fits, clips, hinges, lids and screw bosses are modelled with working clearances, so the parts actually assemble
- Clean handover: you get neutral STEP and STL files that any manufacturer, 3D-print bureau or mould maker can open
- A fixed price and clear deliverables, with revisions included
What I design:
Consumer product housings, electronics and device enclosures, battery and control boxes, snap-fit lids and clips, hinged covers, handles and grips, storage and organiser products, retail fixtures and multi-part assemblies.
What you receive:
- Fully modelled 3D CAD of every part, with the full assembly
- STEP and STL files (ready for moulding quotes or 3D printing)
- Rendered images of the product, and an exploded view on request
- A short DFM note listing wall thickness, draft and parting-line decisions
- Revisions as listed in your package
How it works:
1. You send the idea, dimensions, components to be housed (PCB size, battery, switches, etc.) and any target material or process.
2. I confirm the b...
read more
Send me your product idea, sketches, reference photos or a rough 3D file, and I will turn it into a manufacturing-ready plastic part or enclosure, designed for injection moulding from the first sketch so it is easier and cheaper to tool later.
Why clients choose this service:
- Designed for manufacture, not just to look good: uniform wall thickness, draft angles, ribs, bosses and sensible parting lines are built in from the start
- Fewer prototype and tooling surprises: snap-fits, clips, hinges, lids and screw bosses are modelled with working clearances, so the parts actually assemble
- Clean handover: you get neutral STEP and STL files that any manufacturer, 3D-print bureau or mould maker can open
- A fixed price and clear deliverables, with revisions included
What I design:
Consumer product housings, electronics and device enclosures, battery and control boxes, snap-fit lids and clips, hinged covers, handles and grips, storage and organiser products, retail fixtures and multi-part assemblies.
What you receive:
- Fully modelled 3D CAD of every part, with the full assembly
- STEP and STL files (ready for moulding quotes or 3D printing)
- Rendered images of the product, and an exploded view on request
- A short DFM note listing wall thickness, draft and parting-line decisions
- Revisions as listed in your package
How it works:
1. You send the idea, dimensions, components to be housed (PCB size, battery, switches, etc.) and any target material or process.
2. I confirm the brief and the key dimensions before modelling.
3. I model the parts, check the fit between them, and send a preview for your feedback.
4. I apply your revisions and deliver the final files.
Proof of work:
My portfolio includes multi-part assemblies such as a speaker, a blender, a cordless drill, a robot vacuum, a snap-fit clip and a retail display fixture, all modelled part by part with an exploded view. Please look at the gallery and my 3D models on this profile.
Message me before ordering if you are unsure your project fits. I will give a straight answer.
read less
Send me your product idea, sketches, reference photos or a rough 3D file, and I will turn it into a manufacturing-ready plastic part or enclosure, designed for injection moulding from the first sketch so it is easier and cheaper to tool later.
Why clients choose this service:
- Designed for manufacture, not just to look good: uniform wall thickness, draft angles, ribs, bosses and sensible parting...
read more
Send me your product idea, sketches, reference photos or a rough 3D file, and I will turn it into a manufacturing-ready plastic part or enclosure, designed for injection moulding from the first sketch so it is easier and cheaper to tool later.
Why clients choose this service:
- Designed for manufacture, not just to look good: uniform wall thickness, draft angles, ribs, bosses and sensible parting lines are built in from the start
- Fewer prototype and tooling surprises: snap-fits, clips, hinges, lids and screw bosses are modelled with working clearances, so the parts actually assemble
- Clean handover: you get neutral STEP and STL files that any manufacturer, 3D-print bureau or mould maker can open
- A fixed price and clear deliverables, with revisions included
What I design:
Consumer product housings, electronics and device enclosures, battery and control boxes, snap-fit lids and clips, hinged covers, handles and grips, storage and organiser products, retail fixtures and multi-part assemblies.
What you receive:
- Fully modelled 3D CAD of every part, with the full assembly
- STEP and STL files (ready for moulding quotes or 3D printing)
- Rendered images of the product, and an exploded view on request
- A short DFM note listing wall thickness, draft and parting-line decisions
- Revisions as listed in your package
How it works:
1. You send the idea, dimensions, components to be housed (PCB size, battery, switches, etc.) and any target material or process.
2. I confirm the brief and the key dimensions before modelling.
3. I model the parts, check the fit between them, and send a preview for your feedback.
4. I apply your revisions and deliver the final files.
Proof of work:
My portfolio includes multi-part assemblies such as a speaker, a blender, a cordless drill, a robot vacuum, a snap-fit clip and a retail display fixture, all modelled part by part with an exploded view. Please look at the gallery and my 3D models on this profile.
Message me before ordering if you are unsure your project fits. I will give a straight answer.
read less