I will perform structural analysis and code-compliant design (NBCC / CSA)
About this service
I provide professional structural engineering analysis and design services for steel, concrete, and wood structures in accordance with NBCC and CSA standards.
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
• Gravity, wind, and seismic load analysis
• NBCC load calculations
• Steel, reinforced concrete, and wood member design
• Stability and drift checks
• Member sizing and optimization
• Design coordination with architectural drawings
• Clear calculation summaries (if required)
Software Used:
- SAP2000
- ETABS
- AutoCAD
Deliverables are focused on accuracy, constructability, and professional engineering standards.
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
• Gravity, wind, and seismic load analysis
• NBCC load calculations
• Steel, reinforced concrete, and wood member design
• Stability and drift checks
• Member sizing and optimization
• Design coordination with architectural drawings
• Clear calculation summaries (if required)
Software Used:
- SAP2000
- ETABS
- AutoCAD
Deliverables are focused on accuracy, constructability, and professional engineering standards.
I provide professional structural engineering analysis and design services for steel, concrete, and wood structures in accordance with NBCC and CSA standards.
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
• Gravity, wind, and seismic load analysis
• NBCC load calculations
• Steel, reinforced concrete, and wood member design
• Stability and drift checks
• Member sizing and optimization
• Design coordination with architectural drawings
• Clear calculation summaries (if required)
Software Used:
- SAP2000
- ETABS
- AutoCAD
Deliverables are focused on accuracy, constructability, and professional engineering standards.
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
• Gravity, wind, and seismic load analysis
• NBCC load calculations
• Steel, reinforced concrete, and wood member design
• Stability and drift checks
• Member sizing and optimization
• Design coordination with architectural drawings
• Clear calculation summaries (if required)
Software Used:
- SAP2000
- ETABS
- AutoCAD
Deliverables are focused on accuracy, constructability, and professional engineering standards.
I provide professional structural engineering analysis and design services for steel, concrete, and wood structures in accordance with NBCC and CSA standards.
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
•... read more
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
•... read more
I provide professional structural engineering analysis and design services for steel, concrete, and wood structures in accordance with NBCC and CSA standards.
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
• Gravity, wind, and seismic load analysis
• NBCC load calculations
• Steel, reinforced concrete, and wood member design
• Stability and drift checks
• Member sizing and optimization
• Design coordination with architectural drawings
• Clear calculation summaries (if required)
Software Used:
- SAP2000
- ETABS
- AutoCAD
Deliverables are focused on accuracy, constructability, and professional engineering standards. read less
As an Ontario P.Eng with over 9 years of experience, I deliver practical, code-compliant, and constructible structural solutions for industrial, commercial, and building projects.
Scope of Work:
• 3D structural modeling (SAP2000 / ETABS)
• Gravity, wind, and seismic load analysis
• NBCC load calculations
• Steel, reinforced concrete, and wood member design
• Stability and drift checks
• Member sizing and optimization
• Design coordination with architectural drawings
• Clear calculation summaries (if required)
Software Used:
- SAP2000
- ETABS
- AutoCAD
Deliverables are focused on accuracy, constructability, and professional engineering standards. read less
Service offer categories
Structural Engineering
Civil Engineering
Engineering Design
Software & skills
AutoCAD
Concrete Design
ETABS
Load Calculation
NBCC Load Calculations
Sap2000
Seismic Analysis
Steel Design
Structural Analysis
Structural Engineering
+7 more
Member since
December 2025
Languages
Persian (Farsi),
English
Avg. response time
1 hour
Ontario P.Eng Structural Engineer | Steel, Concrete & Wood (NBCC / CSA) | Analysis & CAD
I am a Professional Structural Engineer (P.Eng – Ontario, Canada) with over 9 years of hands-on
experience delivering practical, code-compliant structural solutions for industrial, commercial, and building projects.
I specialize in structural design and drafting for:
• Steel, reinforced concrete, and wood structures (NBCC, CSA S16, CSA A23.3, CSA O86)
• Industrial foundations, equipment supports,... read more
experience delivering practical, code-compliant structural solutions for industrial, commercial, and building projects.
I specialize in structural design and drafting for:
• Steel, reinforced concrete, and wood structures (NBCC, CSA S16, CSA A23.3, CSA O86)
• Industrial foundations, equipment supports,... read more
Questions and answers
Yes. Designs can be completed in accordance with NBCC and CSA standards. Other codes can be discussed upon request.
Industrial sheds, steel frames, commercial buildings, equipment supports, small buildings, and structural systems in steel, concrete, or wood.
Yes. Calculation summaries or detailed engineering reports can be provided when required.
Yes. I can review, analyze, and optimize existing structural systems for efficiency and cost improvement.
3D analysis model, member sizing results, design summary, and coordinated structural drawings if requested.
Cad Crowd Billing Security policy
Service quality is protected by Cad Crowd Billing Security policy.
More from Masood K.
More similar services
Top designer
Product Design from Concept to 3D Prototype
From
$80
See related services
- 3D Design services
- 3D Modeling services
- CAD Design services
- 2D & 3D Design services
- 2D & 3D Modeling services
- CAD Modeling services
- Drafting services
- Engineering Design services
- 3D Models services
- AutoCAD services
- Mechanical Design services
- Product Design services
- Mechanical 3D Design services
- Rendering services
- 2D Drafting services
- 2D Drawing services
- CAD Drafting services
- Design for Manufacturing services
- 2D AutoCAD services
- 3D Rendering services
- SolidWorks services
- Architectural Design services
- 3D Solidworks services
- CAD Drawing services
- Mechanical Engineering services
- 2D & 3D Drafting services
- 2D/3D AutoCAD services
- 2D & 3D Modeling Solidworks services
- 2D & 3D Architectural Design services
- Floor Plans services
- Assembly Design services
- Architectural Drafting services
- Mechanical Engineer services
- Design Engineer services
- Industrial Design services
- Construction Drawings services