Hire CAD designers & engineers near Mississippi, United States

I would like to introduce myself…I am James Johnson and I am the owner of Straight Edge Drafting and Design.I would like to give you a few reasons to use us for your next or present projects.... Read more

I would like to introduce myself…I am James Johnson and I am the owner of Straight Edge Drafting and Design.I would like to give you a few reasons to use us for your next or present projects.     We are a contract company that does most aspects of design and drafting using AutoCad and Inventor which is widely accepted in the industry. We have 28 years of experience. You will not have to go out and hire designer/draftsmen. You will not have to pay benefits, taxes or layoff personnel when your projects are finished. Our prices are reasonable. You can count on exceptional quality. We do not accept a contract unless we can finish it on your timetable. No job is too small. We can do anything from drawing conversions, "sketches to drawings", floor plans, elevations, foundation plans, sheet metal drawings, mechanical drawings, electrical drawings to full up designs with assembly drawings. Our company is based on the belief that our customers' needs are of the utmost importance. Our entire team is committed to meeting your needs. A high percentage of our business is from repeat customers and referrals. So, if you need drawings...we have you covered. Give us a call and enjoy working with seasoned veterans in the business that knows what it takes to get the job done. We would welcome the opportunity to earn your trust and deliver you the very best service in the industry.    

About Me: In the past twenty plus years, working within large manufacturing facilities, I gained a considerable amount of experience. During this time I have been exposed to various complex mechani... Read more

About Me: In the past twenty plus years, working within large manufacturing facilities, I gained a considerable amount of experience. During this time I have been exposed to various complex mechanical, tooling and manufacturing problems and have gained a tremendous amount of hands on knowledge for solving these problems, giving me the necessary skills and abilities to improve and correct such problems that impede a company causing it to have lower quality and productivity. I have strong skills in the areas of tool making, tool design, product design, electronics, CAD, and automated machinery along with a proven ability to manage a company and feel that these qualities will make a positive impact on your facility. I look forward to hearing from you in the near future. Best Regards, Eddie

I have taken many CAD classes and have earned a certificate in SolidWorks. I'm currently a junior in Mechanical Engineering, and I first started using CAD in a robotics program in high school. From de... Read more

I have taken many CAD classes and have earned a certificate in SolidWorks. I'm currently a junior in Mechanical Engineering, and I first started using CAD in a robotics program in high school. From designing a scale model of an SR-71 to unique coasters, I've learned many techniques that I'm looking forward to using for whatever your needs may be.

11 years of experience in ideation sketching, 2D illustration, 3D modeling for product, automotive, transport and architectural design. Projects range from concept, prototype to production.

11 years of experience in ideation sketching, 2D illustration, 3D modeling for product, automotive, transport and architectural design. Projects range from concept, prototype to production.

A parts designer with a creative problem solving background. Experience designing whole devices and specific parts. Emphasis on manufacturability, ease of assembly and end user needs. Through SAE coll... Read more

A parts designer with a creative problem solving background. Experience designing whole devices and specific parts. Emphasis on manufacturability, ease of assembly and end user needs. Through SAE collegiate design series learned to not only design parts but how and what makes a part easy to produce and assemble. Understands that a little extra time in the design phase can save a lot later on.

Doug Bucci is a designer and educator in the field of jewelry. His work utilizes digital processes to explore and display biological systems and the effect of disease on the body. Computer Aided techn... Read more

Doug Bucci is a designer and educator in the field of jewelry. His work utilizes digital processes to explore and display biological systems and the effect of disease on the body. Computer Aided technologies allow the maker to view and simulate not only data, but patterns and cell forms, which can be transformed into meaningful, personal, wearable art. Bucci views his digital process as one that allows for a creative freedom unfound in traditional hand-made methods. Bucci’s work has appeared in multiple periodicals and texts including Metalsmith magazine, American Craft magazine, and Lark Book’s, 500 series & Darling Publication’s, The Jewelry Compendium. His work is in the collections of the Windsor Castle, Berkshire, London; Philadelphia Museum of Art, Philadelphia, PA; Pinakothek der Moderne, Munich, Germany; Newark Museum, Newark, NJ; Deutsche Goldschmiedehaus Hanau, Germany; and Design Museo, Helsinki, Finland. In addition to CAD work, the artist has spent much of his time teaching Jewelry, and Industrial Design. Bucci earned his MFA (1998) from The Tyler School of Art at Temple University in Philadelphia and currently teaches in the Metals/Jewelry/CAD-CAM area at Tyler, and in the Industrial Design department The University of the Arts, both in Philadelphia.

I have over 9 years of professional experience working in an architectural firm and completed my Masters degree in Architecture in 2014. In the office, I was involved with each aspect of projects from... Read more

I have over 9 years of professional experience working in an architectural firm and completed my Masters degree in Architecture in 2014. In the office, I was involved with each aspect of projects from the initial programming to the final construction administration. I am adept at working on multiple projects and have strong communication skills. My experience is among many market sectors including retail, K-12, higher education, athletics, commercial and healthcare.

B.S. in Aerospace Engineering from MIT 5+ yrs in aerospace engineering industry w/ manufacturing and product design experience from several major aerospace companies. I also hold a green belt in... Read more

B.S. in Aerospace Engineering from MIT 5+ yrs in aerospace engineering industry w/ manufacturing and product design experience from several major aerospace companies. I also hold a green belt in lean six sigma so I am extremely familiar with manufacturing methods and procedures. Experienced in: CATIA V5: Part Design, Surfacing, GD&T, Assembly Design, & Kinematics Autodesk Inventor SolidWorks Hand Drafting I have proven experience taking designs from concept through to manufacturing in the aerospace industry. I have designed parts for various major aircraft, helicopters, and jet engine platforms. My main skill set is taking a concept and finalizing detailed design, dimensions, and tolerances so that it can be sent out for manufacturing. I also have a lot of experience with 3D printing, so if you need a concept quickly, I'd be happy to do the design!

I have strong problem solving skills, and I am a fast learner. I have a background in engineering and experience with a variety of CAD tools.

I have strong problem solving skills, and I am a fast learner. I have a background in engineering and experience with a variety of CAD tools.

An accomplished Design Engineer and Project Leader with experience leading multiple engineering disciplines to deliver projects on time and within budget. Experienced in new product development, optim... Read more

An accomplished Design Engineer and Project Leader with experience leading multiple engineering disciplines to deliver projects on time and within budget. Experienced in new product development, optimization, tooling and fixture design. Experienced in DFMA, FEA, and failure analysis. Strong mechanical and electrical ability. Skilled expert with multiple CAD packages and GD&T. Skilled with SolidWorks, AutoCAD, Autodesk Inventor, Unigraphics NX, ASME Y14.5 GD&T, MIL-STD-100, SolidWorks Simulation, Nastran FEA, Excel, Word, PowerPoint.

Father and husband. Full time CNC machinist. DIY designer and creator. Owner of Slay The Vision Design Studio LLC. Specializing in CNC plasma sheet steel services, CNC router services, laser engraving... Read more

Father and husband. Full time CNC machinist. DIY designer and creator. Owner of Slay The Vision Design Studio LLC. Specializing in CNC plasma sheet steel services, CNC router services, laser engraving and vinyl plotting.

My name is Sebastian, I have recently been through college and have obtained a degree in Drafting and Design. I have been working in my family business for 4 years now, doing renovations and kitchen d... Read more

My name is Sebastian, I have recently been through college and have obtained a degree in Drafting and Design. I have been working in my family business for 4 years now, doing renovations and kitchen designs for homeowners. I am currently a full-time employee as a Frame Engineer building designing high end furniture for big time commercial clients. I would like to start my own business and finally earn a reputation in making quality designs for my own clients! Contact me if you are interested in getting high quality designs from me, Thank you!!

Experienced Mechanical Designer with a demonstrated history of working in the electrical and mechanical manufacturing industry. Skilled in Product Design, AutoCAD, SolidWorks, CAD/CAM, Programming, an... Read more

Experienced Mechanical Designer with a demonstrated history of working in the electrical and mechanical manufacturing industry. Skilled in Product Design, AutoCAD, SolidWorks, CAD/CAM, Programming, and Engineering. Strong engineering professional with a Associate of Applied Sciences - AAS focused in CAD/CADD Drafting and/or Design Technology/Technician from Minnesota State College Southeast.

Hello, my name is Donnie Allen and I am a mechanical engineer with a background in design and manufacturing. I have over a decade of experience using SolidWorks and AutoCAD. I am currently Engineeri... Read more

Hello, my name is Donnie Allen and I am a mechanical engineer with a background in design and manufacturing. I have over a decade of experience using SolidWorks and AutoCAD. I am currently Engineering Manager for a manufacturing company and I know I can help you with your design and modelling needs. I look forward to working with you.

Been in business three years, with four years experience. Drywall hanging, drywall finishing and repair, paint, colors, 2d designs, layouts, moodboards, space saving organization, and purchasing lists... Read more

Been in business three years, with four years experience. Drywall hanging, drywall finishing and repair, paint, colors, 2d designs, layouts, moodboards, space saving organization, and purchasing lists.

Cad, architectural design,Draftsman,detailer 3D models Interior design Floorplans Tiny house designs Presentations Cad,SketchUp,

Cad, architectural design,Draftsman,detailer 3D models Interior design Floorplans Tiny house designs Presentations Cad,SketchUp,