Hire CAD designers & engineers in Westminster, Maryland

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment w... Read more

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment while maintaining parts libraries.

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings,... Read more

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings, structures, furniture, and lighting, so all aspects of the design can be seen to better make changes or improvements as needed. Industry professionals in architecture, furniture, and design also require accurate dimensions and drawings of spaces, products, and fixtures. My company listens to their needs and will met and exceed their expectations. We give one on one design development, 3D models, technical drawings, and our attention to detail is borderline obsessive because it's our promise to deliver accuracy. Do you need help visualizing a design?

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Scienc... Read more

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Science degree in Engineering from my local community college.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical de... Read more

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical design services business. I have 11 US Patents My hourly rate may be a bit higher, but you get what you pay for! Your design is not a place to be cheap. I have been using Solidworks doing intensive design projects since 1997, and used other CAD systems for many years before that (in fact I started with a pencil and a drafting board). I am likely faster and more experienced than most, and can steer your design in the right direction so the parts are manufacturable and as inexpensive as possible.

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industr... Read more

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industry. BricsCAD license, capable but versatile in many other 2D and 3D programs. I work best as a Modeler and Designer.

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots... Read more

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots of experience with creating photorealistic renderings in Blender using PBR textures. I wont leave you disappointed!

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential... Read more

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential and commercial buildings not limited to retail stores, industrial buildings, and schools. I can do structural calculations/analysis and prepare construction documents (including plans and detailing). I am licensed in the District of Columbia(PE-Structural), Maryland(PE), and Illinois(SE). I am based out of the Washington DC area and am available for local site visits within driving distance. I have access to a variety of software including but not limited to AutoCAD, REVIT and structural analysis software. I look forward to providing solutions to your engineering needs. Please contact me if you have any questions or require any further information.

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

Civil Designer with over 7 years of experience in civil engineering and 11+ years in AutoCAD, currently serving as a Design Coordinator overseeing multidisciplinary design efforts leading a team of 7... Read more

Civil Designer with over 7 years of experience in civil engineering and 11+ years in AutoCAD, currently serving as a Design Coordinator overseeing multidisciplinary design efforts leading a team of 7 Designers. I offer competitive rates while delivering high-quality, efficient results across civil and architectural projects. I specialize in: -Utility Plans (Core competence is in Gas while I have a general understanding of Water, Sewer, Sanitary and Electrical) -Existing & Proposed Condition Plans -Civil and Architectural plan set creation for permitting and/or construction purposes -CAD File Cleanup & Conversion (incl. MicroStation to AutoCAD) -Grading Plans & Surface Modeling (using contours) -3D Utility Networks, Surfaces & Profiles -2-Line Diagrams & Construction Details -Residential & Commercial Architectural Drawings (with 3D modeling) -MEP Drafting Support (Electrical, Plumbing, HVAC coordination) Fluent in AutoCAD, Civil 3D, ArcGIS, Bluebeam, and Microsoft Office Suite for project tracking and coordination. Bonus: I have a natural eye for visual design and occasionally create graphics for presentations and proposals.

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

Bachelors Degree in Mechanical Engineering 9 Years of Daily work in Autocad Experience in Mechanical Systems Drawings Experience in Plant Layout Drawings

Bachelors Degree in Mechanical Engineering 9 Years of Daily work in Autocad Experience in Mechanical Systems Drawings Experience in Plant Layout Drawings

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-effic... Read more

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-efficiency SMPS designs (buck/boost converters, GaN/SiC integrations) and mixed analog/digital circuits, like ADC/op-amp interfaces for sensors and IoT prototypes. I’ve routed dozens of boards where EMI control and thermal management aren’t just checkboxes—they’re what keeps your device reliable from prototype to pilot run.

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my respons... Read more

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my responsibilities have included civil and structural engineering, drafting for preliminary and final design contract documents; cross sections, profiles, roadway alignment sheets; maintenance and protection plans; topographic and planimetric maps; graphic illustrations for promotional presentations and traffic counting. I have been trained in the use of design software packages such as Geopak and Inroads. I also have a strong working knowledge of Bentley and Autodesk products.

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I... Read more

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I possess strong problem-solving and communication skills. I graduated from UPenn with a degree in Mechanical Engineering and Applied Mechanics in May 2020. While there, I gained tons of CAD, CAM, DFM, & DFA experience (engineers love acronyms, don't they). I have tons of manufacturing experience in addition to my design experience which means that I will save you time and money by creating a manufacturable design in the first place. Outside of freelancing, I am currently working on a startup venture addressing period cramps using a wearable device.

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm backgroun... Read more

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm background with ANSI Y14.5 2009. I have worked for NASA contractors designing and detailing everything from ground support equipment, electronic boxes, instruments, to flight structures; producing drawing packages to the lead engineers specifications.

- 10+ years of coding and CAD design experience - Love of physics, electronics, and solving problems - Full-time engineer looking to combine my passion with extra income - Focus on simple solutions to... Read more

- 10+ years of coding and CAD design experience - Love of physics, electronics, and solving problems - Full-time engineer looking to combine my passion with extra income - Focus on simple solutions to complex problems

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided i... Read more

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided in the successful delivery of multiple projects varying in value from $100,000 to $100 Million and look forward to helping you complete yours!

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks... Read more

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks Professional (CSWP).

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airfra... Read more

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airframe manufacturer. There I learned and used CATIA v4 and was fully trained in CATIA v5. I've spent the last 10 years working in various design roles as an individual contributor and design lead of cross functional teams on simple and complex projects with values exceeding $15 million. I have advanced skills in CATIA v5 in areas of solid modeling, complex surfacing, assembly design, and drafting as well as bill of material and bill of specification creation, modification, and maintenance. I also have intermediate skills in the CATIA v5 kinematics package.

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flash... Read more

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flashlight enclosure. I have also designed in sculptress but you probably don't want to hire me for that. If you want to 3D print what I designed (or others) just go to my website. I am soon going to work on designing a 3D printer and am thinking about a organic car design-and getting it printed full scale. I also have a provisional patent for a self closing watch band.

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

I started my 2d and 3d modeling journey as a freshman in high school back in 2003. I have learned many 3d programs since then and many manufacturing processes throughout high school and college. Now l... Read more

I started my 2d and 3d modeling journey as a freshman in high school back in 2003. I have learned many 3d programs since then and many manufacturing processes throughout high school and college. Now life takes me in a career of teaching 3d modeling daily to high school students. I would love to create 3d models to help everyday people with everyday problems. I have helped many by creating fixes for existing things and created solutions to many problems family members or colleagues have using 3d modeling and 3d printing. Can’t wait to see what you will have me create!