Hire CAD designers & engineers in Richmond, Virginia

Seven years ago I started out learning to draft by hand, spending hours ensuring my paper was aligned with my T-square, drawing construction lines, and lettering to my hearts content. While continuing... Read more

Seven years ago I started out learning to draft by hand, spending hours ensuring my paper was aligned with my T-square, drawing construction lines, and lettering to my hearts content. While continuing with that practice I moved on to 2d drafting in AutoCAD, and after becoming proficient moved into both architectural drafting and mechanical modeling. After beginning my early college years I was able to earn a certification in SolidWorks and began fulfilling clients needs in 3d modeling. I have accrued experience in 2d CNC work, injection molding, large scale manufacturing, small scale assembly, and am expanding into CAM. Through M. L. McKinney LLC I am able to offer quality modeling and drafting services using industry standard software with 1 on 1 consultation. Together we can tweak your design until it is exactly what you want!

Twelve years experience in AutoCAD and Inventor designing mechanical, HVAC, piping, structural, and electrical fabrication and ship installation drawings for the United States Navy. I specialize in we... Read more

Twelve years experience in AutoCAD and Inventor designing mechanical, HVAC, piping, structural, and electrical fabrication and ship installation drawings for the United States Navy. I specialize in weldments and adapting to whatever the job requires.

I am an efficient and innovative design engineer with ~4 years experience in product design and manufacturing. I am proficient in solid 3D modeling as well as complex 3D surfacing. I have experience w... Read more

I am an efficient and innovative design engineer with ~4 years experience in product design and manufacturing. I am proficient in solid 3D modeling as well as complex 3D surfacing. I have experience with machined part design, injection-molded part design, flat patterning (sewn goods), stamped part design, thermoforming, and metal fabrication. The bulk of my work experience has taken place in a small business setting that has not only provided the opportunity to fully hash out designs from the sketchpad to prototypes to full production, but has also given me the creative freedom to try new or innovative production methods not afforded to a standard engineer. My strengths lie in my versatility, my ability to quickly find creative, cost-effective solutions to product design problems and my strong CAD background.

I am a 22 year-old graduate with an AAS in Engineering Design Technology looking to get experience, practice my CAD skills, and working on a variety of projects. I have a passion for design, and love... Read more

I am a 22 year-old graduate with an AAS in Engineering Design Technology looking to get experience, practice my CAD skills, and working on a variety of projects. I have a passion for design, and love 3D modeling. Between FIRST Robotics and college, I have over 5 years of CAD Experience.

I’m a passionate CAD designer who enjoys bringing concepts to life through precise and creative digital modeling. With a strong eye for detail and a commitment to quality, I strive to design solutions... Read more

I’m a passionate CAD designer who enjoys bringing concepts to life through precise and creative digital modeling. With a strong eye for detail and a commitment to quality, I strive to design solutions that are both functional and visually appealing.

I am a civil engineer with over 10 years of hands-on experience in river engineering, flood modeling, and topographic & geotechnical drafting. I specialize in using industry-standard software includi... Read more

I am a civil engineer with over 10 years of hands-on experience in river engineering, flood modeling, and topographic & geotechnical drafting. I specialize in using industry-standard software including HEC-RAS, AutoCAD Civil 3D, ArcGIS, and AutoCAD 2D/3D to deliver high-quality hydraulic models and technical drawings. ✅ Services I offer: - 1D hydraulic modeling for rivers, bridges, and culverts - Floodplain mapping and inundation analysis - Earth structure design (embankments, culvert, spillways) - Topographic and contour drafting based on survey or DEM data - Geotechnical cross-section and longitudinal profile drafting - Preparation of construction-ready CAD drawings I am detail-oriented, reliable, and committed to delivering precise, on-time results that meet your project requirements. Let's collaborate to bring your civil engineeringidea's

Having more than 12 years experience in 2D and 3D artwork, with various different design fields, I know we are the ones who can bring your desings to life. I have always been enthusiastic about design... Read more

Having more than 12 years experience in 2D and 3D artwork, with various different design fields, I know we are the ones who can bring your desings to life. I have always been enthusiastic about design, not only for its use in the world, but for its sense of innovation and sophistication. As an Industrial Designer, my experience, skills, passion, and enthusiasm have lead me to find a team who also meet that criteria. I feel my experience, skills, personality and enthusiasm would make me an ideal choice for your design needs.With extensive experience in 2D and 3D artwork and different design fields,I can make your ideas become reality.I am providing most comprehensive Computer Aided Design services available today and is an offshore solution for CAD contracting services like CAD conversion, CAD drafting, Auto CAD drawing drafting, CAD digitization,SolidWorks 3D modeling Conversion of manual drawings to CAD,High Resolution Animation,Surface Design.Animation,WebDesign,LogoDesign,Ilustration etc.. -CAD (3D Modeling, Product & Manufacturing Design, Drafting, Mold Making, Reverse Engineering, Sketch to 3D, Mechanical Eng., HQ Animation, Surface Design, Piping, Weldment Design, Sheet Metal Design, 3D Printing Service, CNC, Electrical Engineering. -Architecture (Planning, Economic Analysis, Interior Design, Landscape Architecture, Urban Design, Structural Architecture, Exterior Design, Furniture Design, Windows & Doors, Kitchen Design, Roof projection, 2D Drawings, HQ Renderings, Unique Design. -Design (Graphic Design, Videos, Logos, Illustration, Animation, Emails & Newsletters, Brochures, Page & Book Design, Digital Image Editing, Web Page Design, Mobile Design, Photography, Design Project Managemen

I am an architectural designer with 15 years of experience specializing in high-quality 2D/3D drafting, modeling, and visualization. I create accurate architectural drawings in AutoCAD and produce det... Read more

I am an architectural designer with 15 years of experience specializing in high-quality 2D/3D drafting, modeling, and visualization. I create accurate architectural drawings in AutoCAD and produce detailed 3D models and photorealistic renderings using SketchUp and Lumion. My focus is delivering clean, precise work that aligns with client goals, deadlines, and design intent.

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in... Read more

Dietrich Linde, P.E. graduated from Virginia Tech (2011) with a B.S. in Mechanical Engineering and obtained his PE license in 2017. He has 6 years of experience in design engineering with a focus in materials and machine design and specializes in custom mechanical assemblies and automated systems. Specific capabilities include mechanical and electromechanical design, CAD, FEA and design validation, component and assembly manufacturing, procurement, assembly, and testing. Dietrich worked as a Systems Engineer, mechanical engineer, and sr. mechanical engineer. He has developed custom tooling for unique and specific projects. He has designed and manufactured a large scale metal 3D printer. Additionally he has designed equipment for automating processes to speed up manufacturing or reduce labor intensive applications. Dietrich is able to design with a wide variety of materials including alloy steels, aluminum, Inconel and other nickel-based alloys, carbides, and a wide variety of polymers. He has experience with mechanical systems such as linear actuators, miniature and large scale electric motors, combustion engines, pulleys, gears, solenoids, weldments, belts and other drivetrain components. His manufacturing capabilities include CNC milling, CNC turning (lathe), electro-discharge machining, welding, and 3D printing in both polymers and metals. Deliverables include consultation, design, CAD models, 2D manufacturing drawings, manufacturing of custom parts and assemblies, sourcing and selection of off-the-shelf parts, and component and assembly testing and validation.

• Architect and Civil Engineer with a background in interior design and architecture that ranges through a wide diversity of project sectors from design to execution: residential, hospitality, commerc... Read more

• Architect and Civil Engineer with a background in interior design and architecture that ranges through a wide diversity of project sectors from design to execution: residential, hospitality, commercial and retail both new build and refurbishment from small to large multi-million euro projects. • Certified as BIM Level 2 BS1192/2 Project Information Manager (PIM) and Task Information Manager (TIM). • Excellent design competency and technical detailing skills using a range of software. • Excellent communication skills. Able to converse fluently in English, Greek, Italian and German with colleagues, clients and partners in order to build positive working relationships and work towards common goals. • Strong commercial awareness and organizational skills. A proven record of undertaking projects from conception to completion, meeting and exceeding competitive business targets and delivering projects on time and on budget. • Strong commitment to the development and research of BIM Strategies, workflows, and approaches to improve collaboration.

Senior Mechanical Design Engineer with over 8 years of experience. Most of that experience has been in industrial machine design in the lumber and rubber/tire industry. Additionally, I spent time wit... Read more

Senior Mechanical Design Engineer with over 8 years of experience. Most of that experience has been in industrial machine design in the lumber and rubber/tire industry. Additionally, I spent time with a kitchen equipment manufacturer creating stainless sheetmetal designs for manufacturing, automated food equipment. I've also completed several freelance projects focusing on sheetmetal design. Focus: -Industrial Machine Design (Lumber and Rubber/Tire Industries) -Custom Conveyor Design (Belt, Chain, Roller, Drag Chain) -Automation Equipment (Robotic Work Cells, Automated Dispenser, ect.) -Custom Platforms Design (Machine access, safety fencing, ect.) -Sheetmetal Design (Machine guarding, Kitchen Equipment, ect.) Mechanical Calculations for: -Motors and Gearboxes -Shafts -Chains and Sprockets -Belts and Sheaves -Pneumatic Actuators and Valves -Hydraulic Actuators and Valves

I'm an aerospace engineering professional who has a passion for design and modeling work. During my academic career, I worked with peers to design 2 aerospace systems, a hybrid powered rocket and a ra... Read more

I'm an aerospace engineering professional who has a passion for design and modeling work. During my academic career, I worked with peers to design 2 aerospace systems, a hybrid powered rocket and a radio controlled aircraft to design requirements that was later tested and met all design requirements. I enjoy manufacturing and designing, and bring a wealth of 10 years of metal fabrication experience to the table to support that.

I am a Experienced Mechanical Design Engineer with 5+ years of experience in design of LEO Satellites (Spacecraft and its ground station antennas), Airborne and Defense products like Radar for Militar... Read more

I am a Experienced Mechanical Design Engineer with 5+ years of experience in design of LEO Satellites (Spacecraft and its ground station antennas), Airborne and Defense products like Radar for Military and weather applications as per MIL-STD, LRU Chassis as per ARINC std (Air and Conduction cooled) IP rated enclosures, Display systems, Aircraft Cabin systems, Avionics systems, RF and Digital modules (COTS), sheet metal enclosures, Ground support systems, Test jigs and Standard Racks. * 3D designing, Part modelling, sheet metal modeling, part and Assembly Drawing. * Experience in PCB mechanical design * Experience in designing EMI/EMC, IP rated rugged electronic enclosures, Custom RF shields, 19" rack mountable chassis. * Good knowledge in Torque calculation for Motor drive selection, Thermal and structural hand calculation, stack-up calculation, heat sink and cooling fan selection. * Knowledge in Geometric dimensioning & Tolerancing (GD&T) as per ISO and ASME standards and Tolerance stack-up. * Experience in 3D modelling on CREO, Catia and Solid works. * Experience in Thermal analysis on Ansys Workbench, Icepak, Flotherm , Flotherm XT and FLOEFD. * Experience in Structural analysis on Ansys Workbench and Hypermesh / nastran patran

Mechatronics engineer with hands-on experience in CAD, circuit design, embedded systems, and system design. I have successfully designed and built projects such as a maize milling machine and a plane... Read more

Mechatronics engineer with hands-on experience in CAD, circuit design, embedded systems, and system design. I have successfully designed and built projects such as a maize milling machine and a plane tire lifting system, managing them from concept to completion. Skilled in delivering standalone, fully functional mechanical and electrical systems, I combine practical engineering knowledge with innovative solutions to create meaningful, high-quality projects.

Hi, I’m Alex! I have 3+ years of professional experience as a designer and project manager for both Architecture firms and a Misc Metals subcontractor. I’ve been using Rhino, Illustrator, AutoCAD, and... Read more

Hi, I’m Alex! I have 3+ years of professional experience as a designer and project manager for both Architecture firms and a Misc Metals subcontractor. I’ve been using Rhino, Illustrator, AutoCAD, and Grasshopper for about 7 years. Although I’m best versed in Rhino, I consider myself a strong all-around draftsman and modeler, though most of my experience is relevant mainly to architectural elements. I quickly moved from a position as an intern architect to a misc metals project manager overseeing most aspects of large, multi-floor and multi-million dollar projects for companies such as Microsoft, Google, and Amazon. I’m just now beginning to dabble in freelance work, so my available time is mostly on weekends, but if demand for my services grows, that is certainly subject to change.

I have 15 years of experience using Autocad and Microstation. I have done numerous models for roadways, bridges, and tunnels. I have contributed to multiple multi-billion dollar projects in the Virg... Read more

I have 15 years of experience using Autocad and Microstation. I have done numerous models for roadways, bridges, and tunnels. I have contributed to multiple multi-billion dollar projects in the Virginia Area.

Did very well in Virginia Polytechnic Institute and State University's civil engineering program for five semesters from 2000 until 2003. Years of experience in manufacturing in both customer service... Read more

Did very well in Virginia Polytechnic Institute and State University's civil engineering program for five semesters from 2000 until 2003. Years of experience in manufacturing in both customer service and as an Engineering Technician I allow me to bring a unique perspective and skill set to your project.

30+ years in the field of residential and light commercial construction. Provide accurate build-able plans for any size project. Specializing in quick conceptual turn around to provide conceptual esti... Read more

30+ years in the field of residential and light commercial construction. Provide accurate build-able plans for any size project. Specializing in quick conceptual turn around to provide conceptual estimates and present sales ideas.

BryCAD Design was established in 2006, specializing in residential architectural and structural engineering design. We also tackle concept designs and MEP coordination plans.

BryCAD Design was established in 2006, specializing in residential architectural and structural engineering design. We also tackle concept designs and MEP coordination plans.

We’re a team of talented and dedicated designers 50+ years of combined experience in professional architectural, landscape, and urban design. We thrive to earn the utmost satisfaction from our clients... Read more

We’re a team of talented and dedicated designers 50+ years of combined experience in professional architectural, landscape, and urban design. We thrive to earn the utmost satisfaction from our clients.

I have 8 years of experience working with machines like punch press, press brake, hydraulic press, shear, and also powder coating machines, to transform the sheet metal into products for the electrica... Read more

I have 8 years of experience working with machines like punch press, press brake, hydraulic press, shear, and also powder coating machines, to transform the sheet metal into products for the electrical industry and network (metal enclosures and cabinets, cable trays), and the roofing and green roofing industry. I have experience with CNC punching machines and I'm able to make NC CODES for those machines.

I am a detail-oriented CAD Design Engineer with expertise in creating precise 2D and 3D models for engineering, manufacturing, and product development. I specialize in SolidWorks, and engineering simu... Read more

I am a detail-oriented CAD Design Engineer with expertise in creating precise 2D and 3D models for engineering, manufacturing, and product development. I specialize in SolidWorks, and engineering simulations with experience across industries including mechanical design, product prototyping, process equipment, and fabrication drawings. I focus on delivering accurate, optimized, and fabrication-ready models for clients, ensuring functionality, manufacturability, and cost-effectiveness. My remote collaboration skills allow me to efficiently handle international freelance projects. Core Skills CAD Software: SolidWorks, 3D Modeling & Simulation: Parametric modeling, assemblies, sheet metal, surfacing, weldments Technical Drafting: Engineering drawings, GD&T, BOM generation, fabrication detailing Engineering Analysis: FEA (stress/thermal), CFD, motion simulation Industry Applications: -Mechanical systems & components -Process equipment (reactors, vessels, piping) -Product design & prototyping -Fabrication & manufacturing design -Plant design and layout Portfolio Projects 🔧 1. Process Equipment Design – Pyrolysis Reactor (300L) -Designed a 3D CAD model of a pyrolysis reactor wit assembly drawings included, section views, and fabrication detailing.- -Optimized material selection for cost efficiency and durability. 🔧2. Fluidized Bed Boiler System Created a SolidWorks model of a screw feeder with lock hopper system and purge lines. Integrated sight glass and adjustable feed rate controls for operator usability. 🔧 3. Fabrication Drawings – Structural Support Frame Designed a steel support structure with full fabrication drawings and weld details, Provided cut lists, BOM, and shop-ready drawings. 🔧 4. Process Flow Diagrams & P&IDs Drafted process flow diagrams and P&IDs for ethanol production and gasification projects. 5. Mechanical systems -Designed an auto-reclining wheelchair with independent wheel suspension Work Experience Freelance CAD Engineer – 4years Process Design Engineer – Dangote fertilizer limited -Developed CAD models and engineering drawings for plant facility upgrades, piping and plant layout modification Collaborated with manufacturing teams to ensure fabrication feasibility.

Experienced mechanical designer with over 15 years in CNC machinery and fiber laser cutting systems. I specialize in production-ready sheet metal designs using SolidWorks and SolidCAM. My expertise in... Read more

Experienced mechanical designer with over 15 years in CNC machinery and fiber laser cutting systems. I specialize in production-ready sheet metal designs using SolidWorks and SolidCAM. My expertise includes aluminum gantry structures, laser cutting heads, and remote support for industrial laser systems. I’ve successfully delivered custom machine designs from concept to export, and I’m passionate about creating zero-defect, efficient solutions. Let’s bring your technical vision to life with precision and speed.

I hold a B.S. in Mechanical Engineering and have been working with CAD of different sorts for 20+ years.

I hold a B.S. in Mechanical Engineering and have been working with CAD of different sorts for 20+ years.

I have a background in Mechanical and Manufacturing Engineering with a passion for Computer Aided Design, Product Design, Innovation, and Education. I am looking for opportunities to transform your i... Read more

I have a background in Mechanical and Manufacturing Engineering with a passion for Computer Aided Design, Product Design, Innovation, and Education. I am looking for opportunities to transform your idea concepts into reality! From simply bringing an idea to life, to optimizing an existing product, and everything in between, I personally guarantee each and every one of my customers will be satisfied with the work they receive from me. I take great pride in my work and hold myself to the highest standard of quality. Based on your needs, you may choose from a number of the following services: • Concept Development • 3D Modeling & Rendering • Mechanical Analysis • Drawings & Documentation • Revamp/Update old CAD files to 3D SolidWorks models and drawings-All jobs considered

2d/3d drafting on cad software Placement/removal of cables, poles, and can task code all on MicroStation( Done with Previous job working with Pike corporation.) CAD Projects: Two story Home with eleva... Read more

2d/3d drafting on cad software Placement/removal of cables, poles, and can task code all on MicroStation( Done with Previous job working with Pike corporation.) CAD Projects: Two story Home with elevations. - 1 level clinic building with parking lot( and a 3d rendering.) - drafted tools and parts Ex. Hammers, screws, Bolts. - drawn a toy train with 3d rendering.

Career progression: President Eric Homan Design 3 years Senior Director of Design and Product Development at Frontgate - 7yrs Lead Designer at McGuire Furniture - 4yrs Designer at Restoration Hardware... Read more

Career progression: President Eric Homan Design 3 years Senior Director of Design and Product Development at Frontgate - 7yrs Lead Designer at McGuire Furniture - 4yrs Designer at Restoration Hardware - 5 years Designer for Consumer Products - 2yrs