Hire CAD designers & engineers in College Park, Maryland

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots... Read more

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots of experience with creating photorealistic renderings in Blender using PBR textures. I wont leave you disappointed!

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment w... Read more

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment while maintaining parts libraries.

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical de... Read more

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical design services business. I have 11 US Patents My hourly rate may be a bit higher, but you get what you pay for! Your design is not a place to be cheap. I have been using Solidworks doing intensive design projects since 1997, and used other CAD systems for many years before that (in fact I started with a pencil and a drafting board). I am likely faster and more experienced than most, and can steer your design in the right direction so the parts are manufacturable and as inexpensive as possible.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings,... Read more

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings, structures, furniture, and lighting, so all aspects of the design can be seen to better make changes or improvements as needed. Industry professionals in architecture, furniture, and design also require accurate dimensions and drawings of spaces, products, and fixtures. My company listens to their needs and will met and exceed their expectations. We give one on one design development, 3D models, technical drawings, and our attention to detail is borderline obsessive because it's our promise to deliver accuracy. Do you need help visualizing a design?

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Scienc... Read more

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Science degree in Engineering from my local community college.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industr... Read more

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industry. BricsCAD license, capable but versatile in many other 2D and 3D programs. I work best as a Modeler and Designer.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-effic... Read more

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-efficiency SMPS designs (buck/boost converters, GaN/SiC integrations) and mixed analog/digital circuits, like ADC/op-amp interfaces for sensors and IoT prototypes. I’ve routed dozens of boards where EMI control and thermal management aren’t just checkboxes—they’re what keeps your device reliable from prototype to pilot run.

Product development 25 years 50 US Patent 11 International awards 2 Best Product of the Year Awards SEMA. Team of experts in Physics, Electronics, Solid Works,Firmware, 3D printing, Injection molded... Read more

Product development 25 years 50 US Patent 11 International awards 2 Best Product of the Year Awards SEMA. Team of experts in Physics, Electronics, Solid Works,Firmware, 3D printing, Injection molded plastics tooling design, metal fabrication. Their is nothing we can't build. Business development 5 successful startups. Sold companies to Tootsie-Roll, Autometer, American Fan-coil. Built the #1 Selling NASCAR gauges Spek stepper motor gauges. #1 Automated selling Cotton Candy 22 Countries. projects: https://www.youtube.com/watch?v=Rpzuwc85fRM

For me, product design is not just about solving puzzles. It’s about connecting with people through the things we create and making a product that solves a problem in their lives. I love the process... Read more

For me, product design is not just about solving puzzles. It’s about connecting with people through the things we create and making a product that solves a problem in their lives. I love the process of bringing an idea or a product to the next level, whether I’m creating an industrial design to satisfy the market’s demands, a functional prototype to get people’s attention, or a mass-manufacturable model to bring down costs. In 2013 I bought my first 3D printer as a kit, and used it to start a small business called Mindforge Design. As part of Mindforge, I designed and sold Maryland-themed 3D printed items to the University of Maryland community. Eventually I built a printer of my own which evolved into Readybox, the fastest consumer 3D printer on the market at the time. Readybox had a successful Kickstarter campaign in late 2015, reaching and exceeding its funding goal in only 18 hours. Since graduating in 2017 with a BS in mechanical engineering I’ve been working as a mechanical engineer at Harbor Designs and Manufacturing, where I’ve designed mechanical systems and parts for a multitude of consumer products. I specialize in injection molding and sheet metal design, and in bringing a project from inception through production. Today you can find me designing new products in and out of work every day. With a background in both prototyping and the founding of small businesses, plus experience in product development, CAD design, and multiple types of mass manufacturing, I’m able to guide you through any step of the product design process.

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours... Read more

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours a day, working on schools and other similar buildings, making large sums of money for other people, whilst barely making ends meat for all of my hard work. This is the reason I've decided to go freelance. Coordinating electrical systems in building has become my strong suite. Although I went into CAD classes with dreams of making video games and 3D models, I have not been able to find the right the right company or the right location. Alas, I have continued to build complex 3D models for BIM coordination. But, no more! I’m hoping that if you've found this website you have an idea, maybe a hand drawn sketch or two, or even some old drawings that you’d like to have converted to a digital format. Do you want a replacement for that plastic clip that you broke on your car? Why not let me design it for you in 3D so you can have another one (or as many as you want) 3D printed. My personal website is far from complete at the moment, but I will be sharing all of my projects there (with my clients permission of course) as they come in and/or are under the development process. Feel free to ask questions in the comment section below or shoot me an email at: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ and I’ll be happy to discuss your project with you.

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided i... Read more

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided in the successful delivery of multiple projects varying in value from $100,000 to $100 Million and look forward to helping you complete yours!

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I... Read more

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I possess strong problem-solving and communication skills. I graduated from UPenn with a degree in Mechanical Engineering and Applied Mechanics in May 2020. While there, I gained tons of CAD, CAM, DFM, & DFA experience (engineers love acronyms, don't they). I have tons of manufacturing experience in addition to my design experience which means that I will save you time and money by creating a manufacturable design in the first place. Outside of freelancing, I am currently working on a startup venture addressing period cramps using a wearable device.

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm backgroun... Read more

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm background with ANSI Y14.5 2009. I have worked for NASA contractors designing and detailing everything from ground support equipment, electronic boxes, instruments, to flight structures; producing drawing packages to the lead engineers specifications.

Civil Designer with over 7 years of experience in civil engineering and 11+ years in AutoCAD, currently serving as a Design Coordinator overseeing multidisciplinary design efforts leading a team of 7... Read more

Civil Designer with over 7 years of experience in civil engineering and 11+ years in AutoCAD, currently serving as a Design Coordinator overseeing multidisciplinary design efforts leading a team of 7 Designers. I offer competitive rates while delivering high-quality, efficient results across civil and architectural projects. I specialize in: -Utility Plans (Core competence is in Gas while I have a general understanding of Water, Sewer, Sanitary and Electrical) -Existing & Proposed Condition Plans -Civil and Architectural plan set creation for permitting and/or construction purposes -CAD File Cleanup & Conversion (incl. MicroStation to AutoCAD) -Grading Plans & Surface Modeling (using contours) -3D Utility Networks, Surfaces & Profiles -2-Line Diagrams & Construction Details -Residential & Commercial Architectural Drawings (with 3D modeling) -MEP Drafting Support (Electrical, Plumbing, HVAC coordination) Fluent in AutoCAD, Civil 3D, ArcGIS, Bluebeam, and Microsoft Office Suite for project tracking and coordination. Bonus: I have a natural eye for visual design and occasionally create graphics for presentations and proposals.

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks... Read more

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks Professional (CSWP).

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flash... Read more

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flashlight enclosure. I have also designed in sculptress but you probably don't want to hire me for that. If you want to 3D print what I designed (or others) just go to my website. I am soon going to work on designing a 3D printer and am thinking about a organic car design-and getting it printed full scale. I also have a provisional patent for a self closing watch band.

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions... Read more

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions in the world which highlights my extensive expertise in the software

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

Hello! I am currently looking for ways to help anyone who is interested in the ideation and design of products/mechanisms/prototypes/etc. of any kind. I’m currently an engineer with a manufacturing co... Read more

Hello! I am currently looking for ways to help anyone who is interested in the ideation and design of products/mechanisms/prototypes/etc. of any kind. I’m currently an engineer with a manufacturing company specializing in aluminum fenestration products. My company utilizes limited 3D modeling but extensive 2D AutoCAD software. However, I am highly proficient with the use of the software products listed at the bottom of my profile page. Please feel free to reach out if you are interested in doing business with me, and I would love to discuss our opportunity in further detail!

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

I am a mechanical engineer graduate from the University of Delaware with a very strong background in 3D modeling software, especially Solidworks. I love blending my creative side with engineering to c... Read more

I am a mechanical engineer graduate from the University of Delaware with a very strong background in 3D modeling software, especially Solidworks. I love blending my creative side with engineering to create something unique and special. Let me know how I can help you today!

Educated in ship design with a general interest in product design, I now work as the Design Director for Adventure Solutions; a company that designs, manufactures, and installs custom projects related... Read more

Educated in ship design with a general interest in product design, I now work as the Design Director for Adventure Solutions; a company that designs, manufactures, and installs custom projects related to Ninja Warrior Courses, Aerial Ropes Courses, Climbing, Playgrounds, Ziplines, Family Entertainment Centers, and Sports Therapy. I am deeply interested in refining designs to their best forms given the project goals and limitations. I have years of CAD and Digital Modeling experience to take ideas from notes, measurements, and sketches to developing a complete digital representation of the intended product. I can then take this digital model to develop a product prototype using a variety of quick production tools such as 3D printing, CNC machining, laser cutting, and mold making. The prototype can then offer insight into design refinements, or if prototype meets project goals I can advise on methods of product production to suit the project, and provide manufacturing specific drawings and models. Working with me will be very professional. I will keep in close contact to ensure work is being done to the clients standards. If you have any questions about me or the work I can perform feel free to contact me.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.