Hire CAD designers & engineers in Boonsboro, Maryland

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings,... Read more

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings, structures, furniture, and lighting, so all aspects of the design can be seen to better make changes or improvements as needed. Industry professionals in architecture, furniture, and design also require accurate dimensions and drawings of spaces, products, and fixtures. My company listens to their needs and will met and exceed their expectations. We give one on one design development, 3D models, technical drawings, and our attention to detail is borderline obsessive because it's our promise to deliver accuracy. Do you need help visualizing a design?

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical de... Read more

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical design services business. I have 11 US Patents My hourly rate may be a bit higher, but you get what you pay for! Your design is not a place to be cheap. I have been using Solidworks doing intensive design projects since 1997, and used other CAD systems for many years before that (in fact I started with a pencil and a drafting board). I am likely faster and more experienced than most, and can steer your design in the right direction so the parts are manufacturable and as inexpensive as possible.

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots... Read more

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots of experience with creating photorealistic renderings in Blender using PBR textures. I wont leave you disappointed!

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industr... Read more

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industry. BricsCAD license, capable but versatile in many other 2D and 3D programs. I work best as a Modeler and Designer.

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment w... Read more

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment while maintaining parts libraries.

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Scienc... Read more

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Science degree in Engineering from my local community college.

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm backgroun... Read more

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm background with ANSI Y14.5 2009. I have worked for NASA contractors designing and detailing everything from ground support equipment, electronic boxes, instruments, to flight structures; producing drawing packages to the lead engineers specifications.

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I... Read more

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I possess strong problem-solving and communication skills. I graduated from UPenn with a degree in Mechanical Engineering and Applied Mechanics in May 2020. While there, I gained tons of CAD, CAM, DFM, & DFA experience (engineers love acronyms, don't they). I have tons of manufacturing experience in addition to my design experience which means that I will save you time and money by creating a manufacturable design in the first place. Outside of freelancing, I am currently working on a startup venture addressing period cramps using a wearable device.

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks... Read more

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks Professional (CSWP).

For me, product design is not just about solving puzzles. It’s about connecting with people through the things we create and making a product that solves a problem in their lives. I love the process... Read more

For me, product design is not just about solving puzzles. It’s about connecting with people through the things we create and making a product that solves a problem in their lives. I love the process of bringing an idea or a product to the next level, whether I’m creating an industrial design to satisfy the market’s demands, a functional prototype to get people’s attention, or a mass-manufacturable model to bring down costs. In 2013 I bought my first 3D printer as a kit, and used it to start a small business called Mindforge Design. As part of Mindforge, I designed and sold Maryland-themed 3D printed items to the University of Maryland community. Eventually I built a printer of my own which evolved into Readybox, the fastest consumer 3D printer on the market at the time. Readybox had a successful Kickstarter campaign in late 2015, reaching and exceeding its funding goal in only 18 hours. Since graduating in 2017 with a BS in mechanical engineering I’ve been working as a mechanical engineer at Harbor Designs and Manufacturing, where I’ve designed mechanical systems and parts for a multitude of consumer products. I specialize in injection molding and sheet metal design, and in bringing a project from inception through production. Today you can find me designing new products in and out of work every day. With a background in both prototyping and the founding of small businesses, plus experience in product development, CAD design, and multiple types of mass manufacturing, I’m able to guide you through any step of the product design process.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

Civil Designer with over 7 years of experience in civil engineering and 11+ years in AutoCAD, currently serving as a Design Coordinator overseeing multidisciplinary design efforts leading a team of 7... Read more

Civil Designer with over 7 years of experience in civil engineering and 11+ years in AutoCAD, currently serving as a Design Coordinator overseeing multidisciplinary design efforts leading a team of 7 Designers. I offer competitive rates while delivering high-quality, efficient results across civil and architectural projects. I specialize in: -Utility Plans (Core competence is in Gas while I have a general understanding of Water, Sewer, Sanitary and Electrical) -Existing & Proposed Condition Plans -Civil and Architectural plan set creation for permitting and/or construction purposes -CAD File Cleanup & Conversion (incl. MicroStation to AutoCAD) -Grading Plans & Surface Modeling (using contours) -3D Utility Networks, Surfaces & Profiles -2-Line Diagrams & Construction Details -Residential & Commercial Architectural Drawings (with 3D modeling) -MEP Drafting Support (Electrical, Plumbing, HVAC coordination) Fluent in AutoCAD, Civil 3D, ArcGIS, Bluebeam, and Microsoft Office Suite for project tracking and coordination. Bonus: I have a natural eye for visual design and occasionally create graphics for presentations and proposals.

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided i... Read more

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided in the successful delivery of multiple projects varying in value from $100,000 to $100 Million and look forward to helping you complete yours!

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flash... Read more

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flashlight enclosure. I have also designed in sculptress but you probably don't want to hire me for that. If you want to 3D print what I designed (or others) just go to my website. I am soon going to work on designing a 3D printer and am thinking about a organic car design-and getting it printed full scale. I also have a provisional patent for a self closing watch band.

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions... Read more

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions in the world which highlights my extensive expertise in the software

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airfra... Read more

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airframe manufacturer. There I learned and used CATIA v4 and was fully trained in CATIA v5. I've spent the last 10 years working in various design roles as an individual contributor and design lead of cross functional teams on simple and complex projects with values exceeding $15 million. I have advanced skills in CATIA v5 in areas of solid modeling, complex surfacing, assembly design, and drafting as well as bill of material and bill of specification creation, modification, and maintenance. I also have intermediate skills in the CATIA v5 kinematics package.

Product development 25 years 50 US Patent 11 International awards 2 Best Product of the Year Awards SEMA. Team of experts in Physics, Electronics, Solid Works,Firmware, 3D printing, Injection molded... Read more

Product development 25 years 50 US Patent 11 International awards 2 Best Product of the Year Awards SEMA. Team of experts in Physics, Electronics, Solid Works,Firmware, 3D printing, Injection molded plastics tooling design, metal fabrication. Their is nothing we can't build. Business development 5 successful startups. Sold companies to Tootsie-Roll, Autometer, American Fan-coil. Built the #1 Selling NASCAR gauges Spek stepper motor gauges. #1 Automated selling Cotton Candy 22 Countries. projects: https://www.youtube.com/watch?v=Rpzuwc85fRM

- 10+ years of coding and CAD design experience - Love of physics, electronics, and solving problems - Full-time engineer looking to combine my passion with extra income - Focus on simple solutions to... Read more

- 10+ years of coding and CAD design experience - Love of physics, electronics, and solving problems - Full-time engineer looking to combine my passion with extra income - Focus on simple solutions to complex problems

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my respons... Read more

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my responsibilities have included civil and structural engineering, drafting for preliminary and final design contract documents; cross sections, profiles, roadway alignment sheets; maintenance and protection plans; topographic and planimetric maps; graphic illustrations for promotional presentations and traffic counting. I have been trained in the use of design software packages such as Geopak and Inroads. I also have a strong working knowledge of Bentley and Autodesk products.

Hello! I am currently looking for ways to help anyone who is interested in the ideation and design of products/mechanisms/prototypes/etc. of any kind. I’m currently an engineer with a manufacturing co... Read more

Hello! I am currently looking for ways to help anyone who is interested in the ideation and design of products/mechanisms/prototypes/etc. of any kind. I’m currently an engineer with a manufacturing company specializing in aluminum fenestration products. My company utilizes limited 3D modeling but extensive 2D AutoCAD software. However, I am highly proficient with the use of the software products listed at the bottom of my profile page. Please feel free to reach out if you are interested in doing business with me, and I would love to discuss our opportunity in further detail!

My name is Nathan Dotts, and I am a Mechanical Engineer. I graduated from Brigham Young University Idaho and currently live in Indiana with my wife and two sons. I have industry experience in food, au... Read more

My name is Nathan Dotts, and I am a Mechanical Engineer. I graduated from Brigham Young University Idaho and currently live in Indiana with my wife and two sons. I have industry experience in food, automotive, automation, and fabrication. My specialty is in the area of product design. I even started my own business, Mechanical Design and Fabrication (https://mechanicaldesignandfabrication.com), to help facilitate the process. We help others to design and fabricate their products. When desired, we can also help others to patent their design. Because of my business and previous experience, I have access to equipment such as machinery and software that aids in the engineering process. If you want something built, I can keep cost and time spent waiting on the lower end because I have the ability to do most everything in-house, all except the heaviest of fabrication processes. A more comprehensive list of previous designs and projects can be seen on my business website included above. However I am happy to include a few projects I am most proud of here: 1. Patented 1972 Ford F100 Custom Suspension Kit - Idaho 2. Patented Uddalok 3-Limb Compound Bow - Illinois 3. Epsilon Laboratory Thermocouple Ablator - Arizona