Hire Local CAD Designers near Bethesda, Maryland

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical de... Read more

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical design services business. I have 11 US Patents My hourly rate may be a bit higher, but you get what you pay for! Your design is not a place to be cheap. I have been using Solidworks doing intensive design projects since 1997, and used other CAD systems for many years before that (in fact I started with a pencil and a drafting board). I am likely faster and more experienced than most, and can steer your design in the right direction so the parts are manufacturable and as inexpensive as possible.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings,... Read more

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings, structures, furniture, and lighting, so all aspects of the design can be seen to better make changes or improvements as needed. Industry professionals in architecture, furniture, and design also require accurate dimensions and drawings of spaces, products, and fixtures. My company listens to their needs and will met and exceed their expectations. We give one on one design development, 3D models, technical drawings, and our attention to detail is borderline obsessive because it's our promise to deliver accuracy. Do you need help visualizing a design?

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots... Read more

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots of experience with creating photorealistic renderings in Blender using PBR textures. I wont leave you disappointed!

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment w... Read more

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment while maintaining parts libraries.

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industr... Read more

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industry. BricsCAD license, capable but versatile in many other 2D and 3D programs. I work best as a Modeler and Designer.

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Scienc... Read more

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Science degree in Engineering from my local community college.

My name is Nathan Dotts, and I am a Mechanical Engineer. I graduated from Brigham Young University Idaho and currently live in Indiana with my wife and two sons. I have industry experience in food, au... Read more

My name is Nathan Dotts, and I am a Mechanical Engineer. I graduated from Brigham Young University Idaho and currently live in Indiana with my wife and two sons. I have industry experience in food, automotive, automation, and fabrication. My specialty is in the area of product design. I even started my own business, Mechanical Design and Fabrication (https://mechanicaldesignandfabrication.com), to help facilitate the process. We help others to design and fabricate their products. When desired, we can also help others to patent their design. Because of my business and previous experience, I have access to equipment such as machinery and software that aids in the engineering process. If you want something built, I can keep cost and time spent waiting on the lower end because I have the ability to do most everything in-house, all except the heaviest of fabrication processes. A more comprehensive list of previous designs and projects can be seen on my business website included above. However I am happy to include a few projects I am most proud of here: 1. Patented 1972 Ford F100 Custom Suspension Kit - Idaho 2. Patented Uddalok 3-Limb Compound Bow - Illinois 3. Epsilon Laboratory Thermocouple Ablator - Arizona

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours... Read more

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours a day, working on schools and other similar buildings, making large sums of money for other people, whilst barely making ends meat for all of my hard work. This is the reason I've decided to go freelance. Coordinating electrical systems in building has become my strong suite. Although I went into CAD classes with dreams of making video games and 3D models, I have not been able to find the right the right company or the right location. Alas, I have continued to build complex 3D models for BIM coordination. But, no more! I’m hoping that if you've found this website you have an idea, maybe a hand drawn sketch or two, or even some old drawings that you’d like to have converted to a digital format. Do you want a replacement for that plastic clip that you broke on your car? Why not let me design it for you in 3D so you can have another one (or as many as you want) 3D printed. My personal website is far from complete at the moment, but I will be sharing all of my projects there (with my clients permission of course) as they come in and/or are under the development process. Feel free to ask questions in the comment section below or shoot me an email at: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ and I’ll be happy to discuss your project with you.

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions... Read more

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions in the world which highlights my extensive expertise in the software

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm backgroun... Read more

I have been a mechanical designer for 34 years. I have worked with Autocad and CREO Parametric with Windchill (mainly). I have some Solidworks knowledge (very similar to CREO). I have a firm background with ANSI Y14.5 2009. I have worked for NASA contractors designing and detailing everything from ground support equipment, electronic boxes, instruments, to flight structures; producing drawing packages to the lead engineers specifications.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

Hello! I am currently looking for ways to help anyone who is interested in the ideation and design of products/mechanisms/prototypes/etc. of any kind. I’m currently an engineer with a manufacturing co... Read more

Hello! I am currently looking for ways to help anyone who is interested in the ideation and design of products/mechanisms/prototypes/etc. of any kind. I’m currently an engineer with a manufacturing company specializing in aluminum fenestration products. My company utilizes limited 3D modeling but extensive 2D AutoCAD software. However, I am highly proficient with the use of the software products listed at the bottom of my profile page. Please feel free to reach out if you are interested in doing business with me, and I would love to discuss our opportunity in further detail!

Bachelors Degree in Mechanical Engineering 9 Years of Daily work in Autocad Experience in Mechanical Systems Drawings Experience in Plant Layout Drawings

Bachelors Degree in Mechanical Engineering 9 Years of Daily work in Autocad Experience in Mechanical Systems Drawings Experience in Plant Layout Drawings

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks... Read more

I am a mechanical design engineer with 9+ years of experience. I worked in the plastic injection mold design, plastic product design, and robotics mechanism design fields. I am a Certified SolidWorks Professional (CSWP).

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my respons... Read more

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my responsibilities have included civil and structural engineering, drafting for preliminary and final design contract documents; cross sections, profiles, roadway alignment sheets; maintenance and protection plans; topographic and planimetric maps; graphic illustrations for promotional presentations and traffic counting. I have been trained in the use of design software packages such as Geopak and Inroads. I also have a strong working knowledge of Bentley and Autodesk products.

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-effic... Read more

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-efficiency SMPS designs (buck/boost converters, GaN/SiC integrations) and mixed analog/digital circuits, like ADC/op-amp interfaces for sensors and IoT prototypes. I’ve routed dozens of boards where EMI control and thermal management aren’t just checkboxes—they’re what keeps your device reliable from prototype to pilot run.

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided i... Read more

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided in the successful delivery of multiple projects varying in value from $100,000 to $100 Million and look forward to helping you complete yours!

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

- 10+ years of coding and CAD design experience - Love of physics, electronics, and solving problems - Full-time engineer looking to combine my passion with extra income - Focus on simple solutions to... Read more

- 10+ years of coding and CAD design experience - Love of physics, electronics, and solving problems - Full-time engineer looking to combine my passion with extra income - Focus on simple solutions to complex problems

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential... Read more

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential and commercial buildings not limited to retail stores, industrial buildings, and schools. I can do structural calculations/analysis and prepare construction documents (including plans and detailing). I am licensed in the District of Columbia(PE-Structural), Maryland(PE), and Illinois(SE). I am based out of the Washington DC area and am available for local site visits within driving distance. I have access to a variety of software including but not limited to AutoCAD, REVIT and structural analysis software. I look forward to providing solutions to your engineering needs. Please contact me if you have any questions or require any further information.

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I... Read more

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I possess strong problem-solving and communication skills. I graduated from UPenn with a degree in Mechanical Engineering and Applied Mechanics in May 2020. While there, I gained tons of CAD, CAM, DFM, & DFA experience (engineers love acronyms, don't they). I have tons of manufacturing experience in addition to my design experience which means that I will save you time and money by creating a manufacturable design in the first place. Outside of freelancing, I am currently working on a startup venture addressing period cramps using a wearable device.

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

Mechanical drafter with 15 years of experience in mechanical drawing creation in accordance with ASME Y14 drafting standards

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design