Hire Local CAD Designers near Pasay, Manila

I do shop drawing and detailing and cutlist as well for modular cabinets.

I do shop drawing and detailing and cutlist as well for modular cabinets.

Antonio will make use of all of his acquired knowledge and abilities, impart wisdom and philosophy, and fairly fulfill his given duty. I can visualize thoughts and designs well, and I welcome challeng... Read more

Antonio will make use of all of his acquired knowledge and abilities, impart wisdom and philosophy, and fairly fulfill his given duty. I can visualize thoughts and designs well, and I welcome challenges. He has worked on large-scale industrial projects including cement, poultry processing, power and solar, feed mills, flour mills, cement grinding, and poultry/hog farms for more than 8 years. His areas of expertise are land development design and structural detailing for both concrete and steel structures. Engineering services I can offer as follows; - Site Grading design with Topographic Map - Earthwork Volumes (Cut and Fill) - Cut and Fill Map - Alignment and Section Profiles - Retaining structure and Slope Protection design - Roadworks design - Fence design and Layout - Solar PV Array Earthworks - Drafting and detailing preparation of plans Softwares I used as follows; - Autodesk AutoCAD - AutoCAD Civil 3D - Google Sketchup - Google Earth - Microsoft Excel - Bentley STAAD Pro Thank you and God bless us!

it's clear that you're looking for a candidate that is extremely familiar with the responsibilities associated with the role and can perform successfully to the job adeptly perform above expectations... Read more

it's clear that you're looking for a candidate that is extremely familiar with the responsibilities associated with the role and can perform successfully to the job adeptly perform above expectations I iam a hard working recent college graduate(2.75 Gpa, Bachelor of Science in Architecture) from Tech. Institute of the Philippines. During the course of my academic career. I also manage to accrue nearly 19 years of work experience. I had the privilege of working for Al Dar Alarabia Architecture and Construction in a Autocadd Operator role i my full time, where i learned valuable professional skills such as Autocadd Designer. In both my academic and professional life, In have been consistently praised as detail oriented by my professor and peers. Whether working on academic extracurricular, or professional projects, I apply proven management and organizational skills, which i hope to leverage into the Autocadd Operator role at your company After reviewing my resume, I hope you will agree that i am the type of competent and competitive candidate you are looking for. I look forward to elaborating on how my specific skills and abilities will benefit your organization. Please contact me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or via email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ to arrange for a convenient meeting time.

Hi! I'm a Professional and Licensed Architect in the Philippines. I've been working for Design, Animation and Rendering presentation and BIM for Private Company for eight years. By hiring me, you a... Read more

Hi! I'm a Professional and Licensed Architect in the Philippines. I've been working for Design, Animation and Rendering presentation and BIM for Private Company for eight years. By hiring me, you are guaranteed excellent quality of services.

With 7 years of professional experience in the fields of architecture and engineering, expertise includes interior and house design, as well as the preparation of residential and commercial constructi... Read more

With 7 years of professional experience in the fields of architecture and engineering, expertise includes interior and house design, as well as the preparation of residential and commercial construction drawings covering architectural, structural, plumbing, electrical, mechanical, and auxiliary plans. Proficient in 3D modeling, Interior design, Architectural requirements, playgrounds, and landscape design, demonstrating a balance of technical skill and creative execution. Has 4 years of professional experience in the Philippines and has handled projects in the United States, Australia, and the Middle East for an additional 3 years, collaborating with international teams and clients across various sectors of design and construction. Services Offered: 🧱 2D Architectural Plans • Residential, commercial, and fit-out projects • Layouts for restaurants, offices, and retail spaces • Detailed drawings for cabinetry, furniture, doors, and windows • Engineering plans: structural, electrical, and plumbing 🏡 3D Modeling & Visualization • Interior and exterior modeling for residential and commercial spaces • Realistic 3D renderings and visualizations • Concept presentations and material studies

Has the ability to interact successfully with all levels of staffs. Capable to work on a collaborative process. Able to plan, organize and implement with successful and timely results. Is able to ment... Read more

Has the ability to interact successfully with all levels of staffs. Capable to work on a collaborative process. Able to plan, organize and implement with successful and timely results. Is able to mentor and direct other CAD personnel. Open to change receptive to new ideas and concepts. Specialize in (FPS) Fire Protection System Design in Piping. Pipe fittings, all plan, elevation/section and isometric detailing MTO/BOM as per clients requirements and standard. Also does personal .LSP in AutoCAD/Micro Station to expedite all workloads, and meet the clients submittal in a multi discipline projects such a Civil/Structural & Arch/Electrical drawings design concern by other Engineers and Designers.

An enthusiast 3d parametric Modeller. render my job using efficient software for architects, engineer, construction and designers. Student of Manufacturing and Mechanical Engineering but best desc... Read more

An enthusiast 3d parametric Modeller. render my job using efficient software for architects, engineer, construction and designers. Student of Manufacturing and Mechanical Engineering but best describe me as an APPLICATIONS ENGINEER, knowledgeable in the art of software management. I excel in my peformance with work experience, client interactions, trouble-shooting, continuous learning and perseverance.

Hi I'm Allan Paul Valera a Mechanical Engineer, Certified Solidworks Expert with Finite Element Analysis,Computational Fluid Dynamics and Plastic Injection Simulation Experienced. I have gained e... Read more

Hi I'm Allan Paul Valera a Mechanical Engineer, Certified Solidworks Expert with Finite Element Analysis,Computational Fluid Dynamics and Plastic Injection Simulation Experienced. I have gained extensive experience in design having worked as Mold Design Engineer, which has benefited me greatly in terms Product Development, Fabrication and Mold Design. I am now currently working as a Application Engineer in a Solidworks Reseller company which have furthered my skills not only in design but also in simulation and other solidworks multi-product solutions.

I have more than 15 years of Mechanical Design Engineering experience in the field of process engineering, piping/layout design, mechanical components, shipbuilding structural, rubber and plastic mold... Read more

I have more than 15 years of Mechanical Design Engineering experience in the field of process engineering, piping/layout design, mechanical components, shipbuilding structural, rubber and plastic mold design, CAD/CAM/CAE/Data Management. An Autodesk Certified Inventor Professional and Instructor; Certified in 3D Printing Revolution/ 3D Printing Application/ 3D Printing Software in Coursera; Strong interest in IoT, Additive Manufacturing, Embedded System (Arduino/Raspberry Pi), Robotics; Machine Learning I can provide you services; - 2D Drafting (AutoCAD DWG) - 2D Drawing and 3D Modeling (Inventor; Fusion 360; Onshape) - CAD conversions - Animation (Inventor) - Photorendering visit me at https://sg.▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I only started engaging in this kind of Industry this year. I was actually a Marketing Graduate and working in an engineering firm as a Sales. Our company caters software for Cad/Cam/Mold. Thru my... Read more

I only started engaging in this kind of Industry this year. I was actually a Marketing Graduate and working in an engineering firm as a Sales. Our company caters software for Cad/Cam/Mold. Thru my job, I found out that I have a potential on this kind of field. I did a research, self-study and educate myself to be more knowledgeable. And also thru the help of a good friend of mine, who is a License Mechanical Engineer and our Senior Engineer in our office, Mr. Remus Pacis, taught me and still guiding me up to now. He is also a cadcrowd member, you may check his profile on this link https://www.cadcrowd.com/profile/3187-remus. Additional information, We are also doing business here in the Philippines wherein we accept freelance jobs in mechanical design, architectural and rendering.

I am a licensed Civil Engineer with a strong background in technical drafting and 3D animation, holding a degree in Civil Engineering and ICT. Since high school, I’ve worked as a freelance AutoCAD and... Read more

I am a licensed Civil Engineer with a strong background in technical drafting and 3D animation, holding a degree in Civil Engineering and ICT. Since high school, I’ve worked as a freelance AutoCAD and 3D modeling specialist, earning recognition for Best Speed Performance in AutoCAD and Best in 3D Modeling. My experience includes detailed 2D and 3D modular cabinet design, cutting list, quantity takeoffs, and cost estimation for various construction elements. I’ve also worked onsite as a Project Engineer and QAQC Engineer, where I gained hands-on experience in both field operations and technical documentation. Currently, I’m employed as a Design Engineer for formwork and temporary structure, responsible for structural analysis and ensuring economical, accurate, and safe designs for temporary structure using both 2D and 3D drawings. I’m passionate about delivering precise, buildable, and cost-effective design solutions that align with engineering standards and project goals.

I am a licensed mechanical engineer with experience in designing from geometry, manufacturing, strength, all the way to a working prototype. I also have extensive experience in 3D printing and 3D mode... Read more

I am a licensed mechanical engineer with experience in designing from geometry, manufacturing, strength, all the way to a working prototype. I also have extensive experience in 3D printing and 3D modeling as well as rapid prototyping.

Licensed Civil Structural Engineer with experience in design using CAD and other software for modelling and analysis.

Licensed Civil Structural Engineer with experience in design using CAD and other software for modelling and analysis.

Structural analysis and design engineer for more than 10 years. 3D modeling, Analytical skills, Femap, Solidworks, CAD. Residential / Commercial structure building design / drawings.

Structural analysis and design engineer for more than 10 years. 3D modeling, Analytical skills, Femap, Solidworks, CAD. Residential / Commercial structure building design / drawings.

Solidworks 3D Modelling, Machine Designer.............................................................

Solidworks 3D Modelling, Machine Designer.............................................................

I've been a Civil engineering and Architectural designer of SM supermalls at Philippines. My expertise is about Building design, Structural design, 3D modeling and Rendering services using different e... Read more

I've been a Civil engineering and Architectural designer of SM supermalls at Philippines. My expertise is about Building design, Structural design, 3D modeling and Rendering services using different engineering and design softwares such as follows : Autocad Sketchup 3D modeling software Vray Rendering plug-ins ETABS structural analysis Epanet Water system With the following specialties in design and planning preparation: - Architectural plans - Interior Design - Structural plans - Structural Analysis - Sanitary/Plumbing plans - Electrical Plans - Mechanical Plans - fire protection - HVAC design - LPG Design - Bill of materials and specifications preparation I am a Building and Design Officer of SM Supermalls for almost 5 years. The responsibilities involves the handling mall constructions and operations, engineering & design operations, planning & budgeting, business leadership and experience overseeing engineering/maintenance teams in developing, testing, and remedying technical engineering problems, as well as my superior project management and team leadership abilities. I also mastered the following Engineering and design softwares which may be useful for the benefit of your office as follows: Auto-Cad, Staad, E-tabs, 3D Max ,Architectural software,3D Illustrator, Sketch-up,V-ray Render, Autodesk sketchbook, Surfer10 surveying software, Epanet Water System, Cyber link Power Director, MS Project, Microsoft Math, Mathlab, Microsoft Word, Excel, PowerPoint and Animated Presentations.

Madhouse Engineering Consultancy is an engineering and design firm that specializes in latest construction technology. Our company aims to provide clients a fast paced and cost efficient methodology... Read more

Madhouse Engineering Consultancy is an engineering and design firm that specializes in latest construction technology. Our company aims to provide clients a fast paced and cost efficient methodology that satisfies both time and budget constraint.

I am a Structural Engineer and Architect CAD Technician specializing in Structural Designs and Architecture. I have gained valuable experience in structural design and analysis, seismic analysis, and... Read more

I am a Structural Engineer and Architect CAD Technician specializing in Structural Designs and Architecture. I have gained valuable experience in structural design and analysis, seismic analysis, and various software applications like ETABS, STAAD, Planswift and AutoCAD. I am proficient in using AutoCAD and can do a Structural and Architectural related drawings. What I usually offers? (1) Structural Analysis and Design (2) Structural Plans (Structural framings, connections and detailing) (3) Analysis and Calculations (4) Architectural Drawing Plans (PDF's, sketches, and images to dwg file)

I'm passionate about helping people and companies transform their innovative ideas into parametric 3D CAD Model for design development, advanced manufacturing, or product rendering. I have the ability... Read more

I'm passionate about helping people and companies transform their innovative ideas into parametric 3D CAD Model for design development, advanced manufacturing, or product rendering. I have the ability to fit into an existing design team to understand and develop design intent, whether it is a concept, a final design for manufacture, or final product renderings for sales and marketing. SOLIDWORKS | AUTOCAD | KEYSHOT | PHOTOSHOP

Paul John B. Angel is a licensed Mechanical Engineer in the Philippines since year 2014. He is exposed more on hand drafting and using CAD softwares. He started using CAD softwares since year 2010 and... Read more

Paul John B. Angel is a licensed Mechanical Engineer in the Philippines since year 2014. He is exposed more on hand drafting and using CAD softwares. He started using CAD softwares since year 2010 and had taken a licensed user. He also taken up a licensed Solidworks user on year 2017. He started to work on March 2015 as a mechanical drafter/designer in the field of HVAC wherein he attends meeting for approved designs, design revisions and asbuilts. On August 2016, he works on a manufacturing company where he models 2D and 3D of styrofoam mold, plastic cups, bottles and machines where the clients are multi-national. He is also an assistant foreman and a technical engineer there. On July 2017, he works as a mechanical draftsman on feed milling equipments, silos and he is also the project supervisor/manager of the 60TPH Feedmill plant located in Bataan, Philippines. He managed to finished it and on July 2018 he is assigned as a AutoCAD and Solidworks designer for metal constructions such as I-beams, Z-beams and etc.

With an accumulated 16 years of experience in both design and construction. I am eager to provide my capabilities and positive attitude in a position which suits my experience. I have experience worki... Read more

With an accumulated 16 years of experience in both design and construction. I am eager to provide my capabilities and positive attitude in a position which suits my experience. I have experience working with projects in Philippines, Japan, Australia, Malaysia and Hawaii.

RipeConcepts is a US-Based Digital Company that provides Creative Design, Animation, 2D/3D Modelling, Web and App Development and Digital Marketing. Headquartered in Salt Lake City, we have over 300 e... Read more

RipeConcepts is a US-Based Digital Company that provides Creative Design, Animation, 2D/3D Modelling, Web and App Development and Digital Marketing. Headquartered in Salt Lake City, we have over 300 employees at our state-of-the-art studio in the Philippines. We are structured to help our clients flex and scale. Our clients include Fortune 500 companies, award winning agencies, technology firms, small businesses and retail shops around the world who can attest that we’re easy to work with, and consistently deliver world-class quality.

I have eight (8) years experience of using Autocad Civil 3D for civil works. Complemented with collaborative knowledge in BIM and GIS applications. Involved in a number of roadwork and railwork projec... Read more

I have eight (8) years experience of using Autocad Civil 3D for civil works. Complemented with collaborative knowledge in BIM and GIS applications. Involved in a number of roadwork and railwork projects, both local and the Asia Pacific region. Specializing in topographic drawings and road design under the supervision of a design engineer. I can do: -Topographic Plan and Profile Drawings -Parcellary and Subdivision Plans -Road Design Drawings -Digital Map overlay using GIS application -Import Civil3D Objects to REVIT and vice versa -BIM Modeling

Hi Im Graduate of Mechanical Engineering and Pass the mechanical engineer licensure exam here in our country. Im done Plumbing and Sanitary design and Calculation project for residential and commerci... Read more

Hi Im Graduate of Mechanical Engineering and Pass the mechanical engineer licensure exam here in our country. Im done Plumbing and Sanitary design and Calculation project for residential and commercial building, and LNG Terminal Hub and Combine Cycle Power Station Project.

autocad designer and mastercam programer and hadversatile knowledge in machining process almost 15 years in production supervisor..

autocad designer and mastercam programer and hadversatile knowledge in machining process almost 15 years in production supervisor..

Graduated with a diploma in Architectural Technology, worked for 2 years in a design company using AutoCAD in creating office furniture plans, quit job to study BS Architecture. Currently a 3rd year s... Read more

Graduated with a diploma in Architectural Technology, worked for 2 years in a design company using AutoCAD in creating office furniture plans, quit job to study BS Architecture. Currently a 3rd year student with a lot of time.

Need someone to create a detailed blueprint? Perhaps a 3d design of your character? background renders for your film or games? Or perhaps a drawing or illustration? My works are focused on 3D visuali... Read more

Need someone to create a detailed blueprint? Perhaps a 3d design of your character? background renders for your film or games? Or perhaps a drawing or illustration? My works are focused on 3D visualizations using Autodesk maya including: ✔️ 3d Modeling ✔️ Texture ✔️ Render It also includes using Autodesk CAD for ✔️Architectural design and render ✔️AR/VR Visualization My work experience as a freelancer also includes: ✔️ Illustration ✔️ Logo making ✔️ Photo editting and manipulation. ✔️Illustrated short comic strips ✔️Storyboarding I had made 3D models of kiosk and stands using Autodesk Maya for a part time at Onspex Solution. Worked part time at Makerspace Manila as an all around employee. And also worked as a 3d game artist for a year at AssistAsia PH.