Hire Local CAD Designers near Sirsa, Uttar Pradesh

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goal... Read more

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goals. My strengths include great electrical designing skills, people and time management, strong communication and interpersonal skills. I am a go-getter and work hard to achieve my goals. I am a diploma holder in electrical engineering with more than 20 years of experience and since 2000 I am working for a US based multinational automation company, which mainly deals with AC Drives, DC Drives, Higher rating thyristor bridges, MCC, PCC, Capacitor panel, CLX panels and Flex I/Os panels. Through this rich experience I have gained good knowledge in electrical switch gears and various electrical standards like NEMA and IEC. Also I realize the value of customer satisfaction and trust. I am specialized in designing layout diagrams (GA and IGA), SLD, Schematic diagrams, Cable tray layouts, Room layouts and Bill of Materials for all kinds of electrical panels. I do the panel sizing, switch gear selection and cable schedules independently. I am also an expert in designing control scheme (Ladders) for interlocking of power and control circuits. For schematic drawings I use all the features in AutoCAD electrical.

• Automobile parts designing in solidworks and product design. • Simulation of mechanical parts. • 2D to 3D designing

• Automobile parts designing in solidworks and product design. • Simulation of mechanical parts. • 2D to 3D designing

I have mastered AutoCad, Solidworks and many other 3-D modelling professional designing software. I have 3-D printed many of my designs and published many international journal research papers based o... Read more

I have mastered AutoCad, Solidworks and many other 3-D modelling professional designing software. I have 3-D printed many of my designs and published many international journal research papers based on my 3-D designs. I did internships in Honda Cars, Maruti Suzuki and University of Guelph at Advance manufacturing Lab, CANADA where I designed many 3-D components.

I AM skilled in Tekla , FrameCad, Autocad, Steel Detailing. -:Software Exposure:- CAD Tools Auto CAD 2007,08,10&12 ,Tekla steel(Tekla Steel Structure 15,16,18,19 LATEST 21) Frame Cad, Desig... Read more

I AM skilled in Tekla , FrameCad, Autocad, Steel Detailing. -:Software Exposure:- CAD Tools Auto CAD 2007,08,10&12 ,Tekla steel(Tekla Steel Structure 15,16,18,19 LATEST 21) Frame Cad, Designer Tool Staad Pro (Basic knowledge) Other Software Used M.S. Word, M.S. Excel, M.S. Power Point *Tekla structure Project* •ALPHATHUM CITY G+36 TOWER 1 ,2 AND 2 by using Trimble Tekla Structural Software.Noida Sec-90(BHUTANI INFRA). • Preparation of structural 3D Modal,GA and fabrication drawings for FlipKart Campus 10 Towers in Embassy Village Bangalore by (B L Kashyap). • Preparation of structural GA and fabrication drawings for Midspace G+15 floor Tower in Hyderabad(K Raheja). • Preparation of structural 3D Modal,GA and fabrication drawings for NICL (National Insurance Company )G+17 floor Tower in Kolkata by using (NBCC). • Preparation of structural 3D Modal,GA and fabrication drawings for MIST AVENUE FESTIVAL CITY G+36 TOWER 1 & 2 . Noida sector 143 (BHASIN). • Preparation of structural 3D Modal,GA and fabrication drawings for TONSE RIVER BRIDGE 60.8 METER SPAN by using Trimble Tekla Structural Software(GMR/SYSTRA). -:Working Experience:- Working with JINDAL STEEL & POWER LIMITED(JSPLCSB TEAM) as a post of Tekla Detailer/Designer Since NOV 2014 to till date. Working with AL MASOOD BERGUM WLL ABU DHABI (UAE) as a post of Detailer/ Designer Since July 2014 to NOV 2015. Working with Altif E Homes Pvt Ltd New Delhi as a post of Detailer/Draftsman. Since April 2012 to July 2014. Working with Elemente Homes Noida as a post of Detailer/Draftsman. From March 2009 to April 2012. Working with Raj Counstruction Moradabad as a post of Draftsman. From JAN 2008 to Fab 2009 . -:Professional Qualification:- (Total Experience 8years 6 month) 1. AutoCad (2016 Latest using ) 2. Xsteel /Tekla Structure Version. 17/18,19( 21 Latest using ) My Skill as a Structural Detailer AutoCad & Tekla :- A. 3D Modal GA Drawing and Layouts of Architectural Drawings.

I'm​ a graduate mechanical engineer. Though new to freelancing, I've certain skills that I've acquired over time. I have over 45 months of experience in working in 2-D drafting, 3-D modelling, renderi... Read more

I'm​ a graduate mechanical engineer. Though new to freelancing, I've certain skills that I've acquired over time. I have over 45 months of experience in working in 2-D drafting, 3-D modelling, rendering along with a hand in simulations (Structural/kinematic/thermal). My preferred software skills for these are SolidWorks, AutoCAD, Unigraphics NX, Fusion 360, ANSYS but can stretch out to various other software too. I'm also available for contractual work. Since I'm new at this platform, my rates would be very modest and can work over 40hrs/week.

Industrial Designer with more than 6 years of experience. worked with numerous startups and micro businesses. My experience includes but not limited to : 1. Consumer electronics, (Wearables, Startups... Read more

Industrial Designer with more than 6 years of experience. worked with numerous startups and micro businesses. My experience includes but not limited to : 1. Consumer electronics, (Wearables, Startups with different ideas, PCB Enclosures) 2. Electric Vehicles. (2-wheeler, 3-wheeler, 4-wheeler) 3. Gym Equipment Design 4. Concept Design. 5. Reverse Engineering (Military equipment) 6. 3D Printing 7. Ecommerce Product Listing (Product Renders). 8. Industrial Equipment. 9. Medical Device Design Softwares I use : - Autodesk Inventor - Autodesk Fusion360 - Autodesk AutoCAD - Solidworks - Keyshot

I am a Mechanical Engineer.i have 8+ years of industrial experience in product design. My experience is 3d modeling,drawing,detailing and technical documentation. I work on metallic or non metall... Read more

I am a Mechanical Engineer.i have 8+ years of industrial experience in product design. My experience is 3d modeling,drawing,detailing and technical documentation. I work on metallic or non metallic type of part. i will deliver your product for 3d printing or manufacturing purpose. i will use my best effort to deliver your product as per your requirement. Your suggestions are welcome. Thank you

I am professed in Solidworks and NX Cad. Right now I am a fresher and looking for clients. I am diligent and punctual.

I am professed in Solidworks and NX Cad. Right now I am a fresher and looking for clients. I am diligent and punctual.

I’m mechanical engineer having total 6+ years of experience in design and manufacturing industries. I have experience in product design, machine design, design for manufacturing, design for presentati... Read more

I’m mechanical engineer having total 6+ years of experience in design and manufacturing industries. I have experience in product design, machine design, design for manufacturing, design for presentation, sheet metal design, design of mold, design for 3D printing, etc.

A Mechanical Engineer with a passion for design and automation, who has worked to complete 11 projects for five different clients in the past year. I know how to tackle tricky design challenges and is... Read more

A Mechanical Engineer with a passion for design and automation, who has worked to complete 11 projects for five different clients in the past year. I know how to tackle tricky design challenges and is eager to extend any help possible through the design community.

I am a design enthusiast,specialise in automotive components,electrical components and anything that has wheels!!!!!

I am a design enthusiast,specialise in automotive components,electrical components and anything that has wheels!!!!!

i am blender artist as well as a solidworks mechanical design engineer I am a certified solidworks professional by Dassault systems itself (CSWPA) on the following criteria:- Sheet metal design Surf... Read more

i am blender artist as well as a solidworks mechanical design engineer I am a certified solidworks professional by Dassault systems itself (CSWPA) on the following criteria:- Sheet metal design Surface modelling Engineering drawings Mold design Weldment profiling My previous work with other clients covered mostly all design aspect such as ,solid modelling ,surface modelling , assembly modeling , and vehicle designing .

Enjoy designing while enhancing skills, and trying to achieve professional and academic excellence.

Enjoy designing while enhancing skills, and trying to achieve professional and academic excellence.

Hello, I am Deepak Kumar, a Mechanical Engineer specializing in Machine Design and Analysis. I have strong expertise in SolidWorks and ANSYS, with experience in creating detailed models, assemblies, s... Read more

Hello, I am Deepak Kumar, a Mechanical Engineer specializing in Machine Design and Analysis. I have strong expertise in SolidWorks and ANSYS, with experience in creating detailed models, assemblies, simulations, and industrial design solutions. What I Provide in SolidWorks -2D Drawings with precise dimensions and tolerances -3D Part Modelling (solid and feature-based design) -Assembly Design with motion and interference checks -Sheet Metal Design with flat patterns and fabrication drawings -Surface Modelling for complex or aesthetic geometries -File Deliverables in STEP, IGES, STL, and Parasolid (.XT) formats -Design Support for both industrial and academic projects -3D Printing Services using Bambu Lab What I Provide in ANSYS -Static Analysis: Stress, strain, deformation, FOS, and failure criteria (Von Mises, Tresca) -Modal/Vibration Analysis: Natural frequencies, mode shapes, and acoustic-structural coupling -Thermal Analysis: Steady-state, transient, and thermo-structural coupling -Dynamic Analysis: Transient, harmonic, impact, and cyclic loading simulations -Nonlinear Analysis: Material (plasticity, creep) and geometric nonlinearity, contact & friction -Fatigue & Life Analysis: Fatigue life prediction using S-N curves under cyclic stresses -Advanced Simulation: Topology optimization, composites, parametric studies, and CAD-FEA integration -Reporting: Detailed reports with contour plots, deformation animations, and research-ready documentation -Reports: 100% plagiarism-free technical and analysis reports Note -Feel free to contact me anytime for design guidance, simulation advice, or project discussions I’m always happy to help, and all advice is free of cost.

I am a Mechanical Design Engineer providing professional CAD and mechanical design services for manufacturing, fabrication, and product development. I work with SolidWorks, AutoCAD, Creo, NX (UG), a... Read more

I am a Mechanical Design Engineer providing professional CAD and mechanical design services for manufacturing, fabrication, and product development. I work with SolidWorks, AutoCAD, Creo, NX (UG), and Autodesk Inventor to help clients convert ideas, sketches, PDFs, and 2D drawings into accurate, manufacturing-ready 3D models and drawings. My approach focuses on clean design intent, practical features, and outputs that can be used directly for machining, fabrication, or production. I have hands-on experience with: - 3D part and assembly modeling - Sheet-metal and machined components - 2D drafting and detailing - Design modification and optimization - Manufacturing-oriented CAD documentation I support clients on a project-based basis, offering reliable CAD assistance for short-term or overflow design work. Clear communication, accuracy, and on-time delivery are always my priorities. Software Expertise: • SolidWorks • AutoCAD (2D & basic 3D) • Creo Parametric • Siemens NX (UG NX) • Autodesk Inventor Services I Offer • SolidWorks 3D Part Modeling • Assembly Modeling • AutoCAD 2D Drafting & Drawings • 2D to 3D Conversion • PDF / Hand Sketch to CAD • Manufacturing Drawing Preparation • Basic Design Modification & CAD Support If you need dependable mechanical CAD support using any of the above tools, feel free to contact me. I’ll be happy to review your requirement and suggest the best approach.

VMC hydraulic &Manual fixture design, HMC fixture design, CNC turning fixture design, Receiving gauge design

VMC hydraulic &Manual fixture design, HMC fixture design, CNC turning fixture design, Receiving gauge design

I am a Mechanical & Design Engineer with a passion for creative & Innovative design. I have 10 years of experience as a designer/engineer in DUBAI, currently working full time for running my business... Read more

I am a Mechanical & Design Engineer with a passion for creative & Innovative design. I have 10 years of experience as a designer/engineer in DUBAI, currently working full time for running my business managing a team of engineers and designers. We are Mostly covering the Gulf & US Companies currently & providing them the best quality assurance of work. I actively participate in every project we take on as my true passion is in design.I have a background in Mechanical Engineering degree as well as master Diploma in Design and try to apply Creativity principles into my designs. As a Designer I am expert l in most aspects of design and am highly proficient in 3d modeling and CAD design. I try to be realistic with my timelines and bidding projects. When I commit to do a project I am make sure that it is completed on time. I will not finish any assignment until the client is 100% satisfied. As an engineer I have expertise in: Product Design & Industrial Design, Interior Design, Decorative Design, 3D Design, Modelling & Rendering, Furniture Design, Web design & Development Including Graphic Design & Automotives Design.

"I am a mechanical engineer by education and a CAD enthusiast by passion." i use autocad and solidworks to do most of my work assignments, but have a good hand on other CAD platforms like PTC creo el... Read more

"I am a mechanical engineer by education and a CAD enthusiast by passion." i use autocad and solidworks to do most of my work assignments, but have a good hand on other CAD platforms like PTC creo elements & CATIA V5. With a working knowledge of adobe Photoshop, I can also add an extra charm to my rendering works.

Hardworker, Innovative Projects: SAEINDIA BAJA 2021, Toycathon 2021, Pedal operated ▒▒▒▒▒▒▒▒▒ charger. Mentor at Designing club

Hardworker, Innovative Projects: SAEINDIA BAJA 2021, Toycathon 2021, Pedal operated ▒▒▒▒▒▒▒▒▒ charger. Mentor at Designing club

13 Years of total experience as a mechanical design engineer. Expertise in Siemen's NX, solidworks, Autocad and Ansys.

13 Years of total experience as a mechanical design engineer. Expertise in Siemen's NX, solidworks, Autocad and Ansys.

I have done CAD project on the industry level.

I have done CAD project on the industry level.

Hi, I am a Mechanical engineer. I have done specialization in the field of design and analysis. Now along with having creativity, I design products based on which follow laws of mechanics, taking good... Read more

Hi, I am a Mechanical engineer. I have done specialization in the field of design and analysis. Now along with having creativity, I design products based on which follow laws of mechanics, taking good care of looks as well. To create my ideas into a virtual world, I use AutoCAD to create 2D sketches and do drafting work, and to create a 3D model, I use Solidworks. Now that I have practiced for quite some time, I have a great hand on Solidworks thus, I can create a complex design easily.

To learn the different aspects of organizational excellence in technology to contribute towards the development of organization .  2 Year 6 Month of working experience with Pro-interactive Service I... Read more

To learn the different aspects of organizational excellence in technology to contribute towards the development of organization .  2 Year 6 Month of working experience with Pro-interactive Service India Pvt ltd Maruti Suzuki) and working as Engineering Drawing Trainer. Conducting Autodesk inventor training Program . Working as a freelancer on ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ to Enhance my skills with Autodesk Inventor software. 1 year of experience in Autodesk Inventor Professional, with Immortals working as Trainer. PROJECTS HANDLED:- 1. Title : Little Demon Heater Description : Modeling of Little Demon Heater Client :BedFord Harbour Engineering (Australia) Status : In progress 2. Title : Drone Helicopter Description : Modeling of Drone Helicopter Client :Immortals Status : Completed 3. Title : Baja Sae india 2013 Description : Designing of an chassis Team : Immortals Role : Designing Status : 2nd rank all over India 5-Title : Design of Sugarcane Machine Description : Study and Design of Sugarcane Machine Working Client : Malaysian Students Status : Completed

I am b.tech mechanical 3rd year student in dayalbagh Educational Institute. Presently i have done the advance level certification course in autocad and also persuing fusion 360 software course present... Read more

I am b.tech mechanical 3rd year student in dayalbagh Educational Institute. Presently i have done the advance level certification course in autocad and also persuing fusion 360 software course presently. I am hard working and workaholic person

Results-driven CMM Programmer with hands-on experience in PolyWorks, GOM Inspect, Calypso, and AC-DMIS, specializing in precision measurement, inspection programming, and quality assurance. Highly pro... Read more

Results-driven CMM Programmer with hands-on experience in PolyWorks, GOM Inspect, Calypso, and AC-DMIS, specializing in precision measurement, inspection programming, and quality assurance. Highly proficient in offline and online CMM programming, 3D scanning inspection, and advanced dimensional analysis to ensure strict adherence to engineering specifications. Strong expertise in GD&T interpretation (ASME / ISO), first article inspection (FAI), PPAP, and detailed inspection reporting. Experienced in working with complex geometries, castings, machined, sheet metal, and molded components. Adept at collaborating with manufacturing and quality teams to resolve dimensional issues, reduce rework, and improve process capability. Known for accuracy, efficiency, and a disciplined approach to quality systems such as ISO 9001 / IATF 16949. Committed to continuous improvement and delivering reliable measurement results in high-precision manufacturing environments.

Hi, I am working as Mechanical Design Engineer. I have 4 years of experience in the position, during which I’ve become an expert in CAD software. With this experience and expertise, as well as my dr... Read more

Hi, I am working as Mechanical Design Engineer. I have 4 years of experience in the position, during which I’ve become an expert in CAD software. With this experience and expertise, as well as my drive to continually learn and develop my skills, I am confident that I could fulfill your requirements. My professional experience includes designing, developing, reverse engineering, drawing and fabrication process. The following are my most relevant skills and qualifications: A good team leader. Expert in CAD software Expert in CATIA, SOLIDWORKS, PTC CREO AND AUTOCAD. In addition to these technical skills, I am punctual, passionate and a great communicator. Thank you Sincerely, Vivek Upadhyay

i am mechanical engineer expert in cad software like Auto cad mechanical 2D and 3D, solidworks and siemens Nx (part modeling, sheet metal, assembly, drafting etc.)

i am mechanical engineer expert in cad software like Auto cad mechanical 2D and 3D, solidworks and siemens Nx (part modeling, sheet metal, assembly, drafting etc.)