Remote
Work location
Custom Surface-Mount Tweeter Pods for Morel CAT 298 on VW Polo 6R A-Pillars Ended
About the job
- Please design a pair of custom surface-mount 3D-printable tweeter pods tailored for the Morel CAT 298 to be mounted on the lower A-pillars of a Volkswagen Polo 6R.
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the ferrite magnet structure.
(please see the attached measurement file for the tweeter)
- Surface-mount pod (cup style) that sits entirely on top of the flat face of the factory plastic A-pillar trim, rather than flushing inside it.
- Include a solid, flat mounting foot or base with an integrated rear-bolt hole (screw-from-behind design) so a machine screw can pass from the back of the factory plastic pillar trim into the pod for a secure, heavy-duty mechanical lock.
- Direction - Left/passenger pod → driver’s left ear, Right/driver pod → passenger’s right ear, Preferably ±10° adjustable aiming
- Provide smooth transitions and clean outer walls suitable for automotive-grade vinyl wrapping or painting.
- Please design an integrated, high-airflow plastic honeycomb mesh or protective cross-bars over the front opening of the pod. This mesh must sit at least 3mm forward away from the center of the tweeter to fully clear the protruding soft dome peak, ensuring physical protection without touching the driver diaphragm.
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the ferrite magnet structure.
(please see the attached measurement file for the tweeter)
- Surface-mount pod (cup style) that sits entirely on top of the flat face of the factory plastic A-pillar trim, rather than flushing inside it.
- Include a solid, flat mounting foot or base with an integrated rear-bolt hole (screw-from-behind design) so a machine screw can pass from the back of the factory plastic pillar trim into the pod for a secure, heavy-duty mechanical lock.
- Direction - Left/passenger pod → driver’s left ear, Right/driver pod → passenger’s right ear, Preferably ±10° adjustable aiming
- Provide smooth transitions and clean outer walls suitable for automotive-grade vinyl wrapping or painting.
- Please design an integrated, high-airflow plastic honeycomb mesh or protective cross-bars over the front opening of the pod. This mesh must sit at least 3mm forward away from the center of the tweeter to fully clear the protruding soft dome peak, ensuring physical protection without touching the driver diaphragm.
- Please design a pair of custom surface-mount 3D-printable tweeter pods tailored for the Morel CAT 298 to be mounted on the lower A-pillars of a Volkswagen Polo 6R.
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the ferrite magnet structure.
(please see the attached measurement file for the tweeter)
- Surface-mount pod (cup style) that sits entirely on top of the flat face of the factory plastic A-pillar trim, rather than flushing inside it.
- Include a solid, flat mounting foot or base with an integrated rear-bolt hole (screw-from-behind design) so a machine screw can pass from the back of the factory plastic pillar trim into the pod for a secure, heavy-duty mechanical lock.
- Direction - Left/passenger pod → driver’s left ear, Right/driver pod → passenger’s right ear, Preferably ±10° adjustable aiming
- Provide smooth transitions and clean outer walls suitable for automotive-grade vinyl wrapping or painting.
- Please design an integrated, high-airflow plastic honeycomb mesh or protective cross-bars over the front opening of the pod. This mesh must sit at least 3mm forward away from the center of the tweeter to fully clear the protruding soft dome peak, ensuring physical protection without touching the driver diaphragm.
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the ferrite magnet structure.
(please see the attached measurement file for the tweeter)
- Surface-mount pod (cup style) that sits entirely on top of the flat face of the factory plastic A-pillar trim, rather than flushing inside it.
- Include a solid, flat mounting foot or base with an integrated rear-bolt hole (screw-from-behind design) so a machine screw can pass from the back of the factory plastic pillar trim into the pod for a secure, heavy-duty mechanical lock.
- Direction - Left/passenger pod → driver’s left ear, Right/driver pod → passenger’s right ear, Preferably ±10° adjustable aiming
- Provide smooth transitions and clean outer walls suitable for automotive-grade vinyl wrapping or painting.
- Please design an integrated, high-airflow plastic honeycomb mesh or protective cross-bars over the front opening of the pod. This mesh must sit at least 3mm forward away from the center of the tweeter to fully clear the protruding soft dome peak, ensuring physical protection without touching the driver diaphragm.
- Please design a pair of custom surface-mount 3D-printable tweeter pods tailored for the Morel CAT 298 to be mounted on the lower A-pillars of a Volkswagen Polo 6R.
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the fe... read more
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the fe... read more
- Please design a pair of custom surface-mount 3D-printable tweeter pods tailored for the Morel CAT 298 to be mounted on the lower A-pillars of a Volkswagen Polo 6R.
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the ferrite magnet structure.
(please see the attached measurement file for the tweeter)
- Surface-mount pod (cup style) that sits entirely on top of the flat face of the factory plastic A-pillar trim, rather than flushing inside it.
- Include a solid, flat mounting foot or base with an integrated rear-bolt hole (screw-from-behind design) so a machine screw can pass from the back of the factory plastic pillar trim into the pod for a secure, heavy-duty mechanical lock.
- Direction - Left/passenger pod → driver’s left ear, Right/driver pod → passenger’s right ear, Preferably ±10° adjustable aiming
- Provide smooth transitions and clean outer walls suitable for automotive-grade vinyl wrapping or painting.
- Please design an integrated, high-airflow plastic honeycomb mesh or protective cross-bars over the front opening of the pod. This mesh must sit at least 3mm forward away from the center of the tweeter to fully clear the protruding soft dome peak, ensuring physical protection without touching the driver diaphragm. read less
- The design must include the following precise specifications and features:
--Outer faceplate diameter of 104 mm,
--internal recess cutout/mounting diameter of 72 mm,
--total internal depth clearance of at least 27 mm for the ferrite magnet structure.
(please see the attached measurement file for the tweeter)
- Surface-mount pod (cup style) that sits entirely on top of the flat face of the factory plastic A-pillar trim, rather than flushing inside it.
- Include a solid, flat mounting foot or base with an integrated rear-bolt hole (screw-from-behind design) so a machine screw can pass from the back of the factory plastic pillar trim into the pod for a secure, heavy-duty mechanical lock.
- Direction - Left/passenger pod → driver’s left ear, Right/driver pod → passenger’s right ear, Preferably ±10° adjustable aiming
- Provide smooth transitions and clean outer walls suitable for automotive-grade vinyl wrapping or painting.
- Please design an integrated, high-airflow plastic honeycomb mesh or protective cross-bars over the front opening of the pod. This mesh must sit at least 3mm forward away from the center of the tweeter to fully clear the protruding soft dome peak, ensuring physical protection without touching the driver diaphragm. read less
Things to know
Any
Skill Level
Open budget
Hourly
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Design
3D Modeling
Concept Design
Industrial Design
Product Development
+2 more
Job categories
3D Modeling
3D Design Services
Engineering Design
About the client
Payment ready
Jamaica (01:45 pm)
Posted
Active
Job activity
27 Applicants
2 interviews in progress
Similar jobs
Mold design
Remote - Posted
I have a 3d CAD model, I want to make a mold.for so it can run on plastic injection machine
Industrial Design Services
Mold and Die Design Services
3D Design Services
View job
HAAS CNC Programmer (Contract / Remote-Friendly)
Remote - Posted
Quad Industries / Snell Manufacturing is seeking an experienced HAAS CNC Programmer for contract, remote-friendly programming and production machining support. Our Bradford, T...
CNC Programming
Machine Design
3D Design Services
View job
CAD engineer
Remote - Posted
Looking for help to develop conceptual prototypes of a fin actuator used in a rocket motor. Start point would be CAD designs of linkages in conjunction with a linear actuator...
Mechanical Engineering
3D Design Services
3D Modeling
View job
Ground effects
Remote - Posted
3D Caf model of fiberglass ground effects - side skirts + front/rear bumper wraps for a 1989 Chevy P/Up, stepside.
I'll supply measurements, templates and photos.
Deliverab...
Automotive Design
3D Design Services
3D Modeling
View job
Wardrobe design development using Autodesk Inventor
Remote - Posted
We need a part-time furniture designer to assist with detailed drawings and 3D renderings for our company furniture. The drawings shall be in Autodesk Inventor format. It is e...
Furniture Design
Design Engineering Services
3D Design Services
View job
Class A Exterior automotive surfacing (Offroad supercar)
Remote - Posted
Seeking an experienced automotive CAD surface modeler to develop custom exterior body cladding for a limited-production off-road supercar. Work involves translating supplied d...
Automotive Design
3D Modeling
Mechanical Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
213,163
global members
33,433
projects delivered to clients
Trusted by
