Remote
Work location
Product/CAD designer for a custom silicone bottle boot (manufacturing-ready CAD) Ended
About the job
Project
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I can provide the physical reference bottle and boot for measurement.
Deliverables
- Manufacturing-ready 3D CAD model (native source file + STEP)
- STL files
- 2D technical drawings: dimensions, wall thickness, draft angles, parting
lines, and section views
- A cross-section/detail view of the charm socket (closed-bottom pocket)
- Manufacturing (DFM) notes
- The editable source file (I own all files and IP)
Key specs (full detail in the attached brief)
- Fits Owala FreeSip 24 oz (base diameter about 79 mm)
- Food-grade silicone, about 50–60 Shore A
- Side wall about 1.5–2 mm; thicker charm band about 6–8 mm
- 8 closed-bottom charm sockets (about 8 mm) with small drain notches
- Base about 4 mm with a ~17 mm centre drainage hole
- Designed for compression molding first (possible move to LSR later)
Requirements
- Product/industrial design or mechanical/CAD engineering background
- Experience designing SILICONE molded products (compression and/or LSR)
- Solid grasp of DFM: draft angles, parting lines, wall thickness, tooling
- Portfolio of PHYSICAL molded produc... read more
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I can provide the physical reference bottle and boot for measurement.
Deliverables
- Manufacturing-ready 3D CAD model (native source file + STEP)
- STL files
- 2D technical drawings: dimensions, wall thickness, draft angles, parting
lines, and section views
- A cross-section/detail view of the charm socket (closed-bottom pocket)
- Manufacturing (DFM) notes
- The editable source file (I own all files and IP)
Key specs (full detail in the attached brief)
- Fits Owala FreeSip 24 oz (base diameter about 79 mm)
- Food-grade silicone, about 50–60 Shore A
- Side wall about 1.5–2 mm; thicker charm band about 6–8 mm
- 8 closed-bottom charm sockets (about 8 mm) with small drain notches
- Base about 4 mm with a ~17 mm centre drainage hole
- Designed for compression molding first (possible move to LSR later)
Requirements
- Product/industrial design or mechanical/CAD engineering background
- Experience designing SILICONE molded products (compression and/or LSR)
- Solid grasp of DFM: draft angles, parting lines, wall thickness, tooling
- Portfolio of PHYSICAL molded produc... read more
Project
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I can provide the physical reference bottle and boot for measurement.
Deliverables
- Manufacturing-ready 3D CAD model (native source file + STEP)
- STL files
- 2D technical drawings: dimensions, wall thickness, draft angles, parting
lines, and section views
- A cross-section/detail view of the charm socket (closed-bottom pocket)
- Manufacturing (DFM) notes
- The editable source file (I own all files and IP)
Key specs (full detail in the attached brief)
- Fits Owala FreeSip 24 oz (base diameter about 79 mm)
- Food-grade silicone, about 50–60 Shore A
- Side wall about 1.5–2 mm; thicker charm band about 6–8 mm
- 8 closed-bottom charm sockets (about 8 mm) with small drain notches
- Base about 4 mm with a ~17 mm centre drainage hole
- Designed for compression molding first (possible move to LSR later)
Requirements
- Product/industrial design or mechanical/CAD engineering background
- Experience designing SILICONE molded products (compression and/or LSR)
- Solid grasp of DFM: draft angles, parting lines, wall thickness, tooling
- Portfolio of PHYSICAL molded products you've designed (not just renders)
Please include in your proposal
- Examples of silicone or molded consumer products you've designed (physical)
- A sample of your 2D technical drawings
- Your fee (fixed price preferred) and timeline
- Confirmation you can work from a written brief plus a physical reference sample
- To show you read this, start your reply with the word "BOOT"
This is a single, well-defined part with a clear brief, so it should be a
contained job, with potential follow-on work as the product develops. read less
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I can provide the physical reference bottle and boot for measurement.
Deliverables
- Manufacturing-ready 3D CAD model (native source file + STEP)
- STL files
- 2D technical drawings: dimensions, wall thickness, draft angles, parting
lines, and section views
- A cross-section/detail view of the charm socket (closed-bottom pocket)
- Manufacturing (DFM) notes
- The editable source file (I own all files and IP)
Key specs (full detail in the attached brief)
- Fits Owala FreeSip 24 oz (base diameter about 79 mm)
- Food-grade silicone, about 50–60 Shore A
- Side wall about 1.5–2 mm; thicker charm band about 6–8 mm
- 8 closed-bottom charm sockets (about 8 mm) with small drain notches
- Base about 4 mm with a ~17 mm centre drainage hole
- Designed for compression molding first (possible move to LSR later)
Requirements
- Product/industrial design or mechanical/CAD engineering background
- Experience designing SILICONE molded products (compression and/or LSR)
- Solid grasp of DFM: draft angles, parting lines, wall thickness, tooling
- Portfolio of PHYSICAL molded products you've designed (not just renders)
Please include in your proposal
- Examples of silicone or molded consumer products you've designed (physical)
- A sample of your 2D technical drawings
- Your fee (fixed price preferred) and timeline
- Confirmation you can work from a written brief plus a physical reference sample
- To show you read this, start your reply with the word "BOOT"
This is a single, well-defined part with a clear brief, so it should be a
contained job, with potential follow-on work as the product develops. read less
Project
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I c... read more
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I c... read more
Project
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I can provide the physical reference bottle and boot for measurement.
Deliverables
- Manufacturing-ready 3D CAD model (native source file + STEP)
- STL files
- 2D technical drawings: dimensions, wall thickness, draft angles, parting
lines, and section views
- A cross-section/detail view of the charm socket (closed-bottom pocket)
- Manufacturing (DFM) notes
- The editable source file (I own all files and IP)
Key specs (full detail in the attached brief)
- Fits Owala FreeSip 24 oz (base diameter about 79 mm)
- Food-grade silicone, about 50–60 Shore A
- Side wall about 1.5–2 mm; thicker charm band about 6–8 mm
- 8 closed-bottom charm sockets (about 8 mm) with small drain notches
- Base about 4 mm with a ~17 mm centre drainage hole
- Designed for compression molding first (possible move to LSR later)
Requirements
- Product/industrial design or mechanical/CAD engineering background
- Experience designing SILICONE molded products (compression and/or LSR)
- Solid grasp of DFM: draft angles, parting lines, wall thickness, tooling
- Portfolio of PHYSICAL molded products you've designed (not just renders)
Please include in your proposal
- Examples of silicone or molded consumer products you've designed (physical)
- A sample of your 2D technical drawings
- Your fee (fixed price preferred) and timeline
- Confirmation you can work from a written brief plus a physical reference sample
- To show you read this, start your reply with the word "BOOT"
This is a single, well-defined part with a clear brief, so it should be a
contained job, with potential follow-on work as the product develops. read less
I need manufacturing-ready CAD for a custom food-grade silicone protective
boot for a 24 oz stainless steel water bottle (Owala FreeSip 24 oz). It's a
single moulded part with 8 decorative charm sockets (Crocs/Jibbitz-style
snap-in) set into a thicker band around the upper boot, plus a drainage hole
in the base. I have a detailed written design brief with diagrams (attached),
and I can provide the physical reference bottle and boot for measurement.
Deliverables
- Manufacturing-ready 3D CAD model (native source file + STEP)
- STL files
- 2D technical drawings: dimensions, wall thickness, draft angles, parting
lines, and section views
- A cross-section/detail view of the charm socket (closed-bottom pocket)
- Manufacturing (DFM) notes
- The editable source file (I own all files and IP)
Key specs (full detail in the attached brief)
- Fits Owala FreeSip 24 oz (base diameter about 79 mm)
- Food-grade silicone, about 50–60 Shore A
- Side wall about 1.5–2 mm; thicker charm band about 6–8 mm
- 8 closed-bottom charm sockets (about 8 mm) with small drain notches
- Base about 4 mm with a ~17 mm centre drainage hole
- Designed for compression molding first (possible move to LSR later)
Requirements
- Product/industrial design or mechanical/CAD engineering background
- Experience designing SILICONE molded products (compression and/or LSR)
- Solid grasp of DFM: draft angles, parting lines, wall thickness, tooling
- Portfolio of PHYSICAL molded products you've designed (not just renders)
Please include in your proposal
- Examples of silicone or molded consumer products you've designed (physical)
- A sample of your 2D technical drawings
- Your fee (fixed price preferred) and timeline
- Confirmation you can work from a written brief plus a physical reference sample
- To show you read this, start your reply with the word "BOOT"
This is a single, well-defined part with a clear brief, so it should be a
contained job, with potential follow-on work as the product develops. read less
Things to know
Any
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Modeling
CAD / CAD Design
Mold Design
Reverse Engineering
Silicon Molds Design
+2 more
Job categories
3D Product Modeling
Design Engineering Services
Design for Manufacturability (DFM Services)
About the client
Payment ready
Singapore (09:02 pm)
Posted
Active
Job activity
37 Applicants
0 interviews in progress
Similar jobs
Need a 3D Artist to Create a Luxury Packaging Model
Remote - Posted
Perfumes Box
• Empty box with accurate real-world measurements
• Base and lid supplied as separate components
• Lid pivot positioned correctly to support an opening animati...
3D Modeling
3D Rendering Services
3D Product Modeling
View job
Design modern rechargable table lamps
Remote - Posted
Need to design aesthetic modern looking lamp which is rechargable and carry anywhere
3D Design Services
Industrial Design Services
3D Product Modeling
3D Product Rendering and Design
View job
Freelance Product Design Engineer
Remote - Posted
Freelance Product Design Engineer
Aftermarket Motorcycle Parts
Hampshire, UK · Remote · Freelance / Part-time
We're a small start-up developing specialist aftermarket...
Industrial Design Services
Product Engineering Services
3D Design Services
3D Product Modeling
Mechanical Design Services
View job
designing a candle housing with lid.
Belgium - Posted
I want a cad design for a candle housing (with separate internal candle wax recipient holder to make the candles refillable) with a lid. Separate 3D renders are a plus. These...
3D Design Services
3D Product Modeling
3D Modeling
View job
mouse development
Remote - Posted
Hi,
I've designed a custom wireless gaming mouse as a personal project, both the board and the shell. The shell is a cover, chassis, buttons and a wheel, currently modelled...
AutoCAD Design Services
PCB Design Services
3D Product Modeling
3D Product Rendering and Design
View job
Mechanical Engineer for Industrial Dust Extraction Equipment Design
Remote - Posted
We are looking for an experienced mechanical engineer or a small engineering team to design compact industrial dust extraction and aspiration equipment.
The project includes:...
Mechanical Engineering
Design Engineering Services
Machine Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
204,201
global members
33,345
projects delivered to clients
Trusted by
