Remote
Work location
aluminum extrusion design Anyone
About the job
I need an experienced mechanical / manufacturing engineer to design a complete aluminum extrusion frame system for a gate.
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeated opening/closing).
Easy assembly with standard fasteners (self-tapping screws, bolts, corner brackets, etc.).
Profiles should be optimized for aluminum extrusion: proper wall thickness, symmetry, corner radii, and good manufacturability.
Include connection details so multiple profiles join securely at 90° and other angles.
Deliverables:
3D model of the full frame system and individual extrusion profiles
2D manufacturing drawings (DWG + PDF) with dimensions and tolerances
Bill of Materials (BOM) listing suggested aluminum alloy (e.g. 6063 or 6061), suggested fasteners, and any hardware needed
Optional: exploded assembly views and simple assembly instructions
Project Scope:
This is for the structural frame only (not including infill panels, hinges, or latch). The design should be modular and scalable.
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeated opening/closing).
Easy assembly with standard fasteners (self-tapping screws, bolts, corner brackets, etc.).
Profiles should be optimized for aluminum extrusion: proper wall thickness, symmetry, corner radii, and good manufacturability.
Include connection details so multiple profiles join securely at 90° and other angles.
Deliverables:
3D model of the full frame system and individual extrusion profiles
2D manufacturing drawings (DWG + PDF) with dimensions and tolerances
Bill of Materials (BOM) listing suggested aluminum alloy (e.g. 6063 or 6061), suggested fasteners, and any hardware needed
Optional: exploded assembly views and simple assembly instructions
Project Scope:
This is for the structural frame only (not including infill panels, hinges, or latch). The design should be modular and scalable.
I need an experienced mechanical / manufacturing engineer to design a complete aluminum extrusion frame system for a gate.
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeated opening/closing).
Easy assembly with standard fasteners (self-tapping screws, bolts, corner brackets, etc.).
Profiles should be optimized for aluminum extrusion: proper wall thickness, symmetry, corner radii, and good manufacturability.
Include connection details so multiple profiles join securely at 90° and other angles.
Deliverables:
3D model of the full frame system and individual extrusion profiles
2D manufacturing drawings (DWG + PDF) with dimensions and tolerances
Bill of Materials (BOM) listing suggested aluminum alloy (e.g. 6063 or 6061), suggested fasteners, and any hardware needed
Optional: exploded assembly views and simple assembly instructions
Project Scope:
This is for the structural frame only (not including infill panels, hinges, or latch). The design should be modular and scalable.
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeated opening/closing).
Easy assembly with standard fasteners (self-tapping screws, bolts, corner brackets, etc.).
Profiles should be optimized for aluminum extrusion: proper wall thickness, symmetry, corner radii, and good manufacturability.
Include connection details so multiple profiles join securely at 90° and other angles.
Deliverables:
3D model of the full frame system and individual extrusion profiles
2D manufacturing drawings (DWG + PDF) with dimensions and tolerances
Bill of Materials (BOM) listing suggested aluminum alloy (e.g. 6063 or 6061), suggested fasteners, and any hardware needed
Optional: exploded assembly views and simple assembly instructions
Project Scope:
This is for the structural frame only (not including infill panels, hinges, or latch). The design should be modular and scalable.
I need an experienced mechanical / manufacturing engineer to design a complete aluminum extrusion frame system for a gate.
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeate... read more
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeate... read more
I need an experienced mechanical / manufacturing engineer to design a complete aluminum extrusion frame system for a gate.
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeated opening/closing).
Easy assembly with standard fasteners (self-tapping screws, bolts, corner brackets, etc.).
Profiles should be optimized for aluminum extrusion: proper wall thickness, symmetry, corner radii, and good manufacturability.
Include connection details so multiple profiles join securely at 90° and other angles.
Deliverables:
3D model of the full frame system and individual extrusion profiles
2D manufacturing drawings (DWG + PDF) with dimensions and tolerances
Bill of Materials (BOM) listing suggested aluminum alloy (e.g. 6063 or 6061), suggested fasteners, and any hardware needed
Optional: exploded assembly views and simple assembly instructions
Project Scope:
This is for the structural frame only (not including infill panels, hinges, or latch). The design should be modular and scalable. read less
Requirements:
The frame must be built entirely from aluminum extrusion profiles that can be screwed together (no welding).
Simple, clean, modern design with straight lines and angles only (no curves).
Strong and durable for outdoor gate use (wind load, gate weight, repeated opening/closing).
Easy assembly with standard fasteners (self-tapping screws, bolts, corner brackets, etc.).
Profiles should be optimized for aluminum extrusion: proper wall thickness, symmetry, corner radii, and good manufacturability.
Include connection details so multiple profiles join securely at 90° and other angles.
Deliverables:
3D model of the full frame system and individual extrusion profiles
2D manufacturing drawings (DWG + PDF) with dimensions and tolerances
Bill of Materials (BOM) listing suggested aluminum alloy (e.g. 6063 or 6061), suggested fasteners, and any hardware needed
Optional: exploded assembly views and simple assembly instructions
Project Scope:
This is for the structural frame only (not including infill panels, hinges, or latch). The design should be modular and scalable. read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Design
DESIG
Design 3D
Design a
design
+2 more
Job categories
AutoCAD Design Services
3D Modeling
3D Design Services
About the client
Payment ready
United States (12:17 am)
Posted
Active
Job activity
12 Applicants
0 interviews in progress
Similar jobs
Tutoring...
Remote - Posted
............................................................
Tutoring
3D Modeling
3D Design Services
View job
Premium Leather Backpack — Photorealistic Product Renders
Remote - Posted
Photorealistic product renders for a premium travel backpack.
Deliverables: 6–8 hero renders showing front, side, back, top, and 3/4 views, plus a 360-degree turnaround anima...
3D Product Rendering and Design
Photorealistic Rendering
3D Modeling
View job
Cap prototype
United States - Posted
Cap prototype 3d cad STL file to get produced at a manufacturer.
Prototype Design Services
3D Product Modeling
3D Modeling
View job
Digital design for a custom car based on a TVR Sagaris.
Remote - Posted
Project involves working on a project that would involve doing a custom car body & other parts for a TVR Sagaris made out of carbon fiber.
3D Modeling
Design Engineering Services
Automotive Design
View job
CAD Designer — Silicone Consumer Product, Embedded Insert + Complex Geometry (NDA Required Before Details)
Remote - Posted
I'm developing a patent-pending consumer home product made from food-grade silicone with a pre-installed embedded metal insert. It's in a well-established consumer hardware ca...
2D CAD Design Services
Mechanical CAD Design
3D Modeling
View job
ZW3D Cad expert needed for parts and assembly
Remote - Posted
Job TitleCustom Video Tutorial: 3-Winder Staircase Modeling & Assembly in ZW3D 2024Project DescriptionI am looking for an experienced CAD designer to record a custom, step-by-...
3D Modeling
3D Design Services
Engineering Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
195,384
global members
32,817
projects delivered to clients
Trusted by
