Remote
Work location
CAD Designer — Silicone Consumer Product, Embedded Insert + Complex Geometry (NDA Required Before Details) Anyone
About the job
I'm developing a patent-pending consumer home product made from food-grade silicone with a pre-installed embedded metal insert. It's in a well-established consumer hardware category.
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, solid body)
• Native CAD file (SolidWorks or Fusion 360)
• 2D technical drawing PDF per shape — all dimensions, tolerances, material callouts, insert pocket detail
• One shape involves a cap-over-stem geometry requiring your split-line recommendation before modeling begins
✅ SKILLS REQUIRED
• Professional CAD — SolidWorks preferred, Fusion 360 accepted
• Silicone, rubber, or soft-goods product experience
• Overmolding and embedded insert cavity design
• Mold split-line and parting line experience (essential)
• STEP AP214 export for manufacturer submission
🔒 NDA + IP ASSIGNMENT — MANDATORY
This is a patent-pending product. A Non-Disclosure and IP Assignment Agreement must be signed before any project files, product name, or dimensions are shared. All work product belongs to me as client.
💰 $200–$400 for Phase 1. Follow-on phases available for the right designer.
To apply, please share:
• 2–3 examples of silicone or rubber product CAD work
• Your CAD software of choice
• Confirmation you are comfortable signing NDA/IP assignment before project start read more
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, solid body)
• Native CAD file (SolidWorks or Fusion 360)
• 2D technical drawing PDF per shape — all dimensions, tolerances, material callouts, insert pocket detail
• One shape involves a cap-over-stem geometry requiring your split-line recommendation before modeling begins
✅ SKILLS REQUIRED
• Professional CAD — SolidWorks preferred, Fusion 360 accepted
• Silicone, rubber, or soft-goods product experience
• Overmolding and embedded insert cavity design
• Mold split-line and parting line experience (essential)
• STEP AP214 export for manufacturer submission
🔒 NDA + IP ASSIGNMENT — MANDATORY
This is a patent-pending product. A Non-Disclosure and IP Assignment Agreement must be signed before any project files, product name, or dimensions are shared. All work product belongs to me as client.
💰 $200–$400 for Phase 1. Follow-on phases available for the right designer.
To apply, please share:
• 2–3 examples of silicone or rubber product CAD work
• Your CAD software of choice
• Confirmation you are comfortable signing NDA/IP assignment before project start read more
I'm developing a patent-pending consumer home product made from food-grade silicone with a pre-installed embedded metal insert. It's in a well-established consumer hardware category.
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, solid body)
• Native CAD file (SolidWorks or Fusion 360)
• 2D technical drawing PDF per shape — all dimensions, tolerances, material callouts, insert pocket detail
• One shape involves a cap-over-stem geometry requiring your split-line recommendation before modeling begins
✅ SKILLS REQUIRED
• Professional CAD — SolidWorks preferred, Fusion 360 accepted
• Silicone, rubber, or soft-goods product experience
• Overmolding and embedded insert cavity design
• Mold split-line and parting line experience (essential)
• STEP AP214 export for manufacturer submission
🔒 NDA + IP ASSIGNMENT — MANDATORY
This is a patent-pending product. A Non-Disclosure and IP Assignment Agreement must be signed before any project files, product name, or dimensions are shared. All work product belongs to me as client.
💰 $200–$400 for Phase 1. Follow-on phases available for the right designer.
To apply, please share:
• 2–3 examples of silicone or rubber product CAD work
• Your CAD software of choice
• Confirmation you are comfortable signing NDA/IP assignment before project start read less
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, solid body)
• Native CAD file (SolidWorks or Fusion 360)
• 2D technical drawing PDF per shape — all dimensions, tolerances, material callouts, insert pocket detail
• One shape involves a cap-over-stem geometry requiring your split-line recommendation before modeling begins
✅ SKILLS REQUIRED
• Professional CAD — SolidWorks preferred, Fusion 360 accepted
• Silicone, rubber, or soft-goods product experience
• Overmolding and embedded insert cavity design
• Mold split-line and parting line experience (essential)
• STEP AP214 export for manufacturer submission
🔒 NDA + IP ASSIGNMENT — MANDATORY
This is a patent-pending product. A Non-Disclosure and IP Assignment Agreement must be signed before any project files, product name, or dimensions are shared. All work product belongs to me as client.
💰 $200–$400 for Phase 1. Follow-on phases available for the right designer.
To apply, please share:
• 2–3 examples of silicone or rubber product CAD work
• Your CAD software of choice
• Confirmation you are comfortable signing NDA/IP assignment before project start read less
I'm developing a patent-pending consumer home product made from food-grade silicone with a pre-installed embedded metal insert. It's in a well-established consumer hardware category.
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, so... read more
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, so... read more
I'm developing a patent-pending consumer home product made from food-grade silicone with a pre-installed embedded metal insert. It's in a well-established consumer hardware category.
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, solid body)
• Native CAD file (SolidWorks or Fusion 360)
• 2D technical drawing PDF per shape — all dimensions, tolerances, material callouts, insert pocket detail
• One shape involves a cap-over-stem geometry requiring your split-line recommendation before modeling begins
✅ SKILLS REQUIRED
• Professional CAD — SolidWorks preferred, Fusion 360 accepted
• Silicone, rubber, or soft-goods product experience
• Overmolding and embedded insert cavity design
• Mold split-line and parting line experience (essential)
• STEP AP214 export for manufacturer submission
🔒 NDA + IP ASSIGNMENT — MANDATORY
This is a patent-pending product. A Non-Disclosure and IP Assignment Agreement must be signed before any project files, product name, or dimensions are shared. All work product belongs to me as client.
💰 $200–$400 for Phase 1. Follow-on phases available for the right designer.
To apply, please share:
• 2–3 examples of silicone or rubber product CAD work
• Your CAD software of choice
• Confirmation you are comfortable signing NDA/IP assignment before project start read less
Full product renders, patent figures, detailed measurement charts, and a complete CAD brief are ready — but shared only after NDA.
🔧 SCOPE (Phase 1 — 3 shapes)
• 3D STEP files per shape (AP214, millimetres, solid body)
• Native CAD file (SolidWorks or Fusion 360)
• 2D technical drawing PDF per shape — all dimensions, tolerances, material callouts, insert pocket detail
• One shape involves a cap-over-stem geometry requiring your split-line recommendation before modeling begins
✅ SKILLS REQUIRED
• Professional CAD — SolidWorks preferred, Fusion 360 accepted
• Silicone, rubber, or soft-goods product experience
• Overmolding and embedded insert cavity design
• Mold split-line and parting line experience (essential)
• STEP AP214 export for manufacturer submission
🔒 NDA + IP ASSIGNMENT — MANDATORY
This is a patent-pending product. A Non-Disclosure and IP Assignment Agreement must be signed before any project files, product name, or dimensions are shared. All work product belongs to me as client.
💰 $200–$400 for Phase 1. Follow-on phases available for the right designer.
To apply, please share:
• 2–3 examples of silicone or rubber product CAD work
• Your CAD software of choice
• Confirmation you are comfortable signing NDA/IP assignment before project start read less
Things to know
Any
Skill Level
$400
Fixed-rate (USD)
Part-time
Job type
1-3 months
Job duration
Areas of expertise
2D Technical Drawings
3D Modeling
CAD 3D
CAD Design
Fusion 360
SolidWorks
Solidworks
+4 more
Job categories
2D CAD Design Services
Mechanical CAD Design
3D Modeling
About the client
Payment not ready
United States (12:16 pm)
Posted
Active
Job activity
22 Applicants
0 interviews in progress
Similar jobs
Cap prototype
United States - Posted
Cap prototype 3d cad STL file to get produced at a manufacturer.
Prototype Design Services
3D Product Modeling
3D Modeling
View job
Digital design for a custom car based on a TVR Sagaris.
Remote - Posted
Project involves working on a project that would involve doing a custom car body & other parts for a TVR Sagaris made out of carbon fiber.
3D Modeling
Design Engineering Services
Automotive Design
View job
ZW3D Cad expert needed for parts and assembly
Remote - Posted
Job TitleCustom Video Tutorial: 3-Winder Staircase Modeling & Assembly in ZW3D 2024Project DescriptionI am looking for an experienced CAD designer to record a custom, step-by-...
3D Modeling
3D Design Services
Engineering Design
View job
Mask prototype
United States - Posted
I need a prototype 3d cad of this mask to test out in warm condition areas.
Rapid Prototyping Services
3D Modeling
3D Design Services
View job
Sheet Metal CAD Designer - Adapt Kiosk for New Banknote Reader (Fusion 360 / SolidWorks)
Remote - Posted
We have an existing kiosk with cash payment systems. All design files are available in STEP format. We need to adapt the kiosk to a new banknote reader / bill acceptor model....
Sheet Metal Design
SolidWorks Design Services
3D Modeling
View job
CAD designer needed to model 3D /2D and rendering Garden decor products
Remote - Posted
CAD developer who can do 2D,3D file, 3D model, rendering for our PLANTERS and other garden decors
3D Modeling
3D Design Services
AutoCAD Drawing Services
3D Rendering Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
195,218
global members
32,801
projects delivered to clients
Trusted by
