Remote
Work location
Using OnShape, prepare parts for laser cutting or CNC routing of plywood. Ended
About the job
We are developing a mechanical vacuum pump system intended for low-resource environments. The design uses laser-cut or CNC routed plywood parts.
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the parts for either laser cutting or CNC routing.
- Optimize the layout for minimal stock usage. Optimization does not need to be extreme but simply first order optimization.
- Identify and make contact with shops in Bangalore to do either laser cutting or CNC routing.
- Coordinate with me to select a shop.
- Supply DXF files, or similar, to the chosen shop.
- The parts must be labeled by laser or CNC and cut by laser or CNC.
- Ensure that the job is clearly described and coordinated with the chosen shop.
I am a foreign engineer from the USA working in Bangalore. You must be willing to communicate with me in English.
Below is a link to the OnShape design. The tab of interest for this job is titled: “Plywood frame”.
https://cad.onshape.com/documents/a5d1f0ab7bb07463af66f741/w/331ec68709459bf681e46a28/e/279efdd30ac46f726886ae0e?renderMode=0&uiState=69d8a57113bdc8529ff9bfb3
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the parts for either laser cutting or CNC routing.
- Optimize the layout for minimal stock usage. Optimization does not need to be extreme but simply first order optimization.
- Identify and make contact with shops in Bangalore to do either laser cutting or CNC routing.
- Coordinate with me to select a shop.
- Supply DXF files, or similar, to the chosen shop.
- The parts must be labeled by laser or CNC and cut by laser or CNC.
- Ensure that the job is clearly described and coordinated with the chosen shop.
I am a foreign engineer from the USA working in Bangalore. You must be willing to communicate with me in English.
Below is a link to the OnShape design. The tab of interest for this job is titled: “Plywood frame”.
https://cad.onshape.com/documents/a5d1f0ab7bb07463af66f741/w/331ec68709459bf681e46a28/e/279efdd30ac46f726886ae0e?renderMode=0&uiState=69d8a57113bdc8529ff9bfb3
We are developing a mechanical vacuum pump system intended for low-resource environments. The design uses laser-cut or CNC routed plywood parts.
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the parts for either laser cutting or CNC routing.
- Optimize the layout for minimal stock usage. Optimization does not need to be extreme but simply first order optimization.
- Identify and make contact with shops in Bangalore to do either laser cutting or CNC routing.
- Coordinate with me to select a shop.
- Supply DXF files, or similar, to the chosen shop.
- The parts must be labeled by laser or CNC and cut by laser or CNC.
- Ensure that the job is clearly described and coordinated with the chosen shop.
I am a foreign engineer from the USA working in Bangalore. You must be willing to communicate with me in English.
Below is a link to the OnShape design. The tab of interest for this job is titled: “Plywood frame”.
https://cad.onshape.com/documents/a5d1f0ab7bb07463af66f741/w/331ec68709459bf681e46a28/e/279efdd30ac46f726886ae0e?renderMode=0&uiState=69d8a57113bdc8529ff9bfb3
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the parts for either laser cutting or CNC routing.
- Optimize the layout for minimal stock usage. Optimization does not need to be extreme but simply first order optimization.
- Identify and make contact with shops in Bangalore to do either laser cutting or CNC routing.
- Coordinate with me to select a shop.
- Supply DXF files, or similar, to the chosen shop.
- The parts must be labeled by laser or CNC and cut by laser or CNC.
- Ensure that the job is clearly described and coordinated with the chosen shop.
I am a foreign engineer from the USA working in Bangalore. You must be willing to communicate with me in English.
Below is a link to the OnShape design. The tab of interest for this job is titled: “Plywood frame”.
https://cad.onshape.com/documents/a5d1f0ab7bb07463af66f741/w/331ec68709459bf681e46a28/e/279efdd30ac46f726886ae0e?renderMode=0&uiState=69d8a57113bdc8529ff9bfb3
We are developing a mechanical vacuum pump system intended for low-resource environments. The design uses laser-cut or CNC routed plywood parts.
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the part... read more
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the part... read more
We are developing a mechanical vacuum pump system intended for low-resource environments. The design uses laser-cut or CNC routed plywood parts.
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the parts for either laser cutting or CNC routing.
- Optimize the layout for minimal stock usage. Optimization does not need to be extreme but simply first order optimization.
- Identify and make contact with shops in Bangalore to do either laser cutting or CNC routing.
- Coordinate with me to select a shop.
- Supply DXF files, or similar, to the chosen shop.
- The parts must be labeled by laser or CNC and cut by laser or CNC.
- Ensure that the job is clearly described and coordinated with the chosen shop.
I am a foreign engineer from the USA working in Bangalore. You must be willing to communicate with me in English.
Below is a link to the OnShape design. The tab of interest for this job is titled: “Plywood frame”.
https://cad.onshape.com/documents/a5d1f0ab7bb07463af66f741/w/331ec68709459bf681e46a28/e/279efdd30ac46f726886ae0e?renderMode=0&uiState=69d8a57113bdc8529ff9bfb3 read less
The design is partially complete in OnShape. One part studio is complete and that will be the focus of this job.
There are about 32 pieces of plywood in the part studio. Your tasks will include:
- Uniquely label each part.
- Lay out the parts for either laser cutting or CNC routing.
- Optimize the layout for minimal stock usage. Optimization does not need to be extreme but simply first order optimization.
- Identify and make contact with shops in Bangalore to do either laser cutting or CNC routing.
- Coordinate with me to select a shop.
- Supply DXF files, or similar, to the chosen shop.
- The parts must be labeled by laser or CNC and cut by laser or CNC.
- Ensure that the job is clearly described and coordinated with the chosen shop.
I am a foreign engineer from the USA working in Bangalore. You must be willing to communicate with me in English.
Below is a link to the OnShape design. The tab of interest for this job is titled: “Plywood frame”.
https://cad.onshape.com/documents/a5d1f0ab7bb07463af66f741/w/331ec68709459bf681e46a28/e/279efdd30ac46f726886ae0e?renderMode=0&uiState=69d8a57113bdc8529ff9bfb3 read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
CNC Laser
CNC Routing
DXF Files
Layout Optimization
Onshape
+2 more
Job categories
3D Modeling
About the client
Payment ready
India (05:41 pm)
Posted
Active
Job activity
14 Applicants
2 interviews in progress
Similar jobs
Design Engineer (Electrical / Mechanical)
Kolkata, India - Posted
We are seeking a versatile Design Engineer with a strong background in either Mechanical or Electrical design (ideally a mix of both) to join our production team. You will be...
2D CAD Design Services
3D Modeling
3D Design Services
View job
MET414 – Structural Analysis with ANSYS: Guided Practice & Project Assignments
Remote - Posted
A comprehensive collection of guided practice exercises and project assignments focused on conducting linear static structural analyses using ANSYS Mechanical. Topics include...
Mechanical Engineering
FEA Finite Element Analysis
3D Modeling
View job
Tennis Serve dynamic & Motion simulation
Remote - Posted
I simulated with another tools the motion of a person doing a tennis serve. I have represented the skeleton of a human with 75 points and I have coordinates of those point ove...
FEA Finite Element Analysis
Structural Engineering
3D Modeling
View job
Precast Villa Construction – Simple CAD Drawings (Urgent, 4 Sheets)
Remote - Posted
We need a CAD designer to prepare 4 simple, clear drawings for a precast villa construction concept: (1) construction sequence diagram, (2) structural grid with typical sectio...
CAD Drawing Services
3D Modeling
3D Design Services
View job
Project Title: ANSYS Mechanical FEA — 3D Triangular Plate Static Structural Analysis
Remote - Posted
Software Required: ANSYS Mechanical 2025 R1 or R2
Deliverables Needed:
I need a completed static structural FEA on a 3D triangular plate. I will provide the geometry file (....
Mechanical Engineering
3D Modeling
Mechanical Design Services
View job
Product Design for Rugged digital scope Device (Military-Style, Aluminum, FEA/CFD Analysis Required)
Remote - Posted
Project Description:
We are looking for a talented product designer to create a military-style (rugged) enclosure for our "digital scope" device. The main focus of this proj...
Design for Manufacturability (DFM Services)
3D Modeling
3D Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
193,048
global members
32,719
projects delivered to clients
Trusted by
