Remote
Work location
Computational Fluid Dynamics–Based Design and Performance Analysis of Hybrid Water–Wind Turbine Systems for Decentralized Power Generation.” Ended
About the job
My thesis is titled “Computational Fluid Dynamics–Based Design and Performance Analysis of Hybrid Water–Wind Turbine Systems for Decentralized Power Generation.” The research studies two hybrid turbine configurations: a Pelton wheel combined with a horizontal-axis wind turbine (HAWT) and a floating water wheel combined with a vertical-axis wind turbine (VAWT). The turbine models are created in SOLIDWORKS, and their performance is analyzed using CFD simulations in ANSYS Fluent and CFX.
Most of the thesis is already written, but I need help with the technical simulation and analysis work, including:
* Setting up CFD simulations in ANSYS Fluent/CFX
* Performing a mesh independence study
* Generating velocity contours, pressure contours, and streamlines
* Improving the CFD methodology section
* Improving the results and discussion section
* Providing the ANSYS simulation files (.cas/.dat) and CAD models
The goal is to complete and improve the technical CFD sections of the thesis so it meets academic standards for submission.
Most of the thesis is already written, but I need help with the technical simulation and analysis work, including:
* Setting up CFD simulations in ANSYS Fluent/CFX
* Performing a mesh independence study
* Generating velocity contours, pressure contours, and streamlines
* Improving the CFD methodology section
* Improving the results and discussion section
* Providing the ANSYS simulation files (.cas/.dat) and CAD models
The goal is to complete and improve the technical CFD sections of the thesis so it meets academic standards for submission.
My thesis is titled “Computational Fluid Dynamics–Based Design and Performance Analysis of Hybrid Water–Wind Turbine Systems for Decentralized Power Generation.” The research studies two hybrid turbine configurations: a Pelton wheel combined with a horizontal-axis wind turbine (HAWT) and a floating water wheel combined with a vertical-axis wind turbine (VAWT). The turbine models are created in SOLIDWORKS, and their performance is analyzed using CFD simulations in ANSYS Fluent and CFX.
Most of the thesis is already written, but I need help with the technical simulation and analysis work, including:
* Setting up CFD simulations in ANSYS Fluent/CFX
* Performing a mesh independence study
* Generating velocity contours, pressure contours, and streamlines
* Improving the CFD methodology section
* Improving the results and discussion section
* Providing the ANSYS simulation files (.cas/.dat) and CAD models
The goal is to complete and improve the technical CFD sections of the thesis so it meets academic standards for submission.
Most of the thesis is already written, but I need help with the technical simulation and analysis work, including:
* Setting up CFD simulations in ANSYS Fluent/CFX
* Performing a mesh independence study
* Generating velocity contours, pressure contours, and streamlines
* Improving the CFD methodology section
* Improving the results and discussion section
* Providing the ANSYS simulation files (.cas/.dat) and CAD models
The goal is to complete and improve the technical CFD sections of the thesis so it meets academic standards for submission.
My thesis is titled “Computational Fluid Dynamics–Based Design and Performance Analysis of Hybrid Water–Wind Turbine Systems for Decentralized Power Generation.” The research studies two hybrid turbine configurations: a Pelton wheel combined with a horizontal-axis wind turbine (HAWT) and a floating water wheel combined with a vertical-axis wind turbine (VAWT). The turbine models are created in SOL...
read more
My thesis is titled “Computational Fluid Dynamics–Based Design and Performance Analysis of Hybrid Water–Wind Turbine Systems for Decentralized Power Generation.” The research studies two hybrid turbine configurations: a Pelton wheel combined with a horizontal-axis wind turbine (HAWT) and a floating water wheel combined with a vertical-axis wind turbine (VAWT). The turbine models are created in SOLIDWORKS, and their performance is analyzed using CFD simulations in ANSYS Fluent and CFX.
Most of the thesis is already written, but I need help with the technical simulation and analysis work, including:
* Setting up CFD simulations in ANSYS Fluent/CFX
* Performing a mesh independence study
* Generating velocity contours, pressure contours, and streamlines
* Improving the CFD methodology section
* Improving the results and discussion section
* Providing the ANSYS simulation files (.cas/.dat) and CAD models
The goal is to complete and improve the technical CFD sections of the thesis so it meets academic standards for submission. read less
Most of the thesis is already written, but I need help with the technical simulation and analysis work, including:
* Setting up CFD simulations in ANSYS Fluent/CFX
* Performing a mesh independence study
* Generating velocity contours, pressure contours, and streamlines
* Improving the CFD methodology section
* Improving the results and discussion section
* Providing the ANSYS simulation files (.cas/.dat) and CAD models
The goal is to complete and improve the technical CFD sections of the thesis so it meets academic standards for submission. read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Full-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D Modeling Solidworks
ANSYS
ANSYS CFX
ANSYS Fluent
CFD
CFD Analysis
+3 more
Job categories
Mechanical Engineering
Design Engineering Services
Computational Fluid Dynamics
Part-to-CAD Modeling
+1 more
About the client
Payment ready
Pakistan (05:23 am)
Posted
Active
Job activity
14 Applicants
0 interviews in progress
7 unanswered invites
Similar jobs
Agricultural Equipment Mechanical Design Engineer
Remote - Posted
Mechanical Design Engineer – Agricultural Sprayer Booms (contract, remote)
AME Group and Agri Automation Australia design and build agricultural machinery in South Australi...
Mechanical Design Services
Mechanical Engineering
3D Design Services
View job
Industrial Designer/Product development engineer.
Remote - Posted
I am developing a premium, modular concentrate vaporizer and am looking for an experienced industrial designer/product development engineer to help turn my concept into a prof...
Industrial Design Services
Mechanical Engineering
3D Product Rendering and Design
Mechanical CAD Design
View job
Reproduction of specialist gas control equipment P&IDs
Remote - Posted
We would like to have some manufacturers P&IDs drawn as our own, and on our own title block.
As a further note, we are looking to engage with a CAD engineer we could work w...
Mechanical Drawing Services
CAD Drawing Services
Mechanical Engineering
View job
Materials Scientist / Engineer
Remote - Posted
# Materials Scientist / Engineer
Compensation: $80–$130/hour
Job Type: Contractor
Location: Remote
Please share your linkdin
## About the Role
We are seeking ex...
Mechanical Engineering
3D Design Services
3D Modeling
View job
Mechanical Engineer for CNC-Machined Product Development
Remote - Posted
RealBlanks is seeking an experienced mechanical design engineer to develop a precision-machined product from an initial concept through production-ready files.
The project...
Product Engineering Services
Mechanical Design Services
Machine Design
CNC Programming
Mechanical Engineering
View job
AGARD 445.6 – Aeroelastic Flutter Analysis
Remote - Posted
Looking for an experienced specialist with practical experience in aeroelastic flutter analysis of the AGARD 445.6 wing, using ANSYS Fluent, Mechanical and System Coupling (2-...
Aerospace Engineering
Engineering Design
Mechanical Engineering
FEA Finite Element Analysis
Computational Fluid Dynamics
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
208,631
global members
33,367
projects delivered to clients
Trusted by
