Remote
Work location
Recreate Stand in CAD as a printable object. Add a mechanism for adjusting the hieght. Ended
About the job
We have a stand that hold boxes for coffee while the machine fills them. it was made out of metal. We want to recreate it out of 3d print but we also need to be able to adjust the height.
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from the top part. Then we could put a bunch of different holes on each side that we could put pins or screws through to select the height.
The bottom part piece of metal that goes horizantal holds the bottom of the coffee box. If we cut the legs below that maybe even down to the base and then made a two risers that they could slide down into to allow us to adjust the height.
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from the top part. Then we could put a bunch of different holes on each side that we could put pins or screws through to select the height.
The bottom part piece of metal that goes horizantal holds the bottom of the coffee box. If we cut the legs below that maybe even down to the base and then made a two risers that they could slide down into to allow us to adjust the height.
We have a stand that hold boxes for coffee while the machine fills them. it was made out of metal. We want to recreate it out of 3d print but we also need to be able to adjust the height.
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from the top part. Then we could put a bunch of different holes on each side that we could put pins or screws through to select the height.
The bottom part piece of metal that goes horizantal holds the bottom of the coffee box. If we cut the legs below that maybe even down to the base and then made a two risers that they could slide down into to allow us to adjust the height.
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from the top part. Then we could put a bunch of different holes on each side that we could put pins or screws through to select the height.
The bottom part piece of metal that goes horizantal holds the bottom of the coffee box. If we cut the legs below that maybe even down to the base and then made a two risers that they could slide down into to allow us to adjust the height.
We have a stand that hold boxes for coffee while the machine fills them. it was made out of metal. We want to recreate it out of 3d print but we also need to be able to adjust the height.
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from t... read more
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from t... read more
We have a stand that hold boxes for coffee while the machine fills them. it was made out of metal. We want to recreate it out of 3d print but we also need to be able to adjust the height.
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from the top part. Then we could put a bunch of different holes on each side that we could put pins or screws through to select the height.
The bottom part piece of metal that goes horizantal holds the bottom of the coffee box. If we cut the legs below that maybe even down to the base and then made a two risers that they could slide down into to allow us to adjust the height. read less
My thought was to make it two parts
1. the top part just as it is (maybe a little thicker for strength when not made of metal)
2. The base will need to have a center open space to recieve the legs from the top part. Then we could put a bunch of different holes on each side that we could put pins or screws through to select the height.
The bottom part piece of metal that goes horizantal holds the bottom of the coffee box. If we cut the legs below that maybe even down to the base and then made a two risers that they could slide down into to allow us to adjust the height. read less
Things to know
Entry
Skill Level
$40
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D Modeling
2D & 3D Renderings
3D Modeling
3D Printing
3D Printing Design
3D modeling for 3D print
+3 more
Job categories
3D Printing Design
3D Product Modeling
3D Product Rendering and Design
About the client
Payment ready
Canada (04:33 pm)
Posted
Active
Job activity
52 Applicants
1 interviews in progress
4 unanswered invites
More open jobs from this client (1)
3D Print Design modification of existing Steamdeck carrying carrying design
Remote - Posted
We have a prototype design of a carrying case for a steamdeck but want to make some changes.
1. We want to change out the existing hinge mechanism for a zipper to make it mo...
3D Printing Design
3D Product Modeling
3D Product Rendering and Design
View job
Similar jobs
Expert in 3D Modeling, CAD Design & 3D Printing Optimization
Remote - Posted
I provide professional 3D modeling services specializing in additive manufacturing (3D printing). My goal is to ensure your ideas are functional, precise, and ready for produc...
3D Models of Machine Parts
3D Printing Design
3D Modeling
3D CAD Translation Services
View job
Mechanical Engineer / 3D CAD Designer for Small Metal Component (Eyewear Product)
Remote - Posted
I am looking for a mechanical or industrial designer with strong 3D CAD experience (SolidWorks, Fusion 360, Inventor or similar) to collaborate on the development of an innova...
3D Product Modeling
Mechanical CAD Design
Mechanical Design Services
3D Modeling
View job
Ladder Product Design
India - Posted
CAD drawing for a customized ladder. Will share more details while connect.
3D Modeling
CAD Drawing Services
3D Product Modeling
View job
CAD designer needed for modelling of lamps for 3D printing - architecturally inspired
Remote - Posted
Overview
We are looking for an experienced 3D designer to create a print-ready 3D model of a lamp based on provided reference images and a design description. The model wil...
3D Printing Design
3D Modeling
View job
CAD designer needed for modelling of lamps for 3D printing
Remote - Posted
Overview
We are looking for an experienced 3D designer to create a print-ready 3D model of a lamp based on provided reference images and a design description. The model wil...
3D Printing Design
View job
SolidWorks
Bosnia and Herzegovina - Posted
3D modeling in SolidWorks
Part design
Assembly modeling
Export to STEP, STL, and other formats
3D Modeling
3D Logo Design
3D Models of Machine Parts
3D Printing Design
View job
