Remote
Work location
Quick Engineering Review and Stamp-- NH, USA Ended
About the job
I need stamped framing drawings for a job in New Hampshire. Budget is $750-1200. License must apply in NH.
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top) pony walls that will serve as dividers between INDOOR sports courts.
-As designed, the walls will support themselves for the most part but a system, likely ClarkDietrich LGPW36 and PW36 supports should be utilized as necessary.
-The anchor/fasteners should be specified for anchoring in concrete slab (34 years old) with approx 1.5" of new asphalt on top.
-The asphalt will be finished with multiple layers of outdoor finishing paint, as used to finish tennis courts so it must be determined if a pressure treated bottom plate is required. Again, the project is indoors and the concrete slab is 34 years old.
-Sketchup rendition of project included. NOTE the 42" pony walls are the only new build. All other walls are existing and will not be changed.
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top) pony walls that will serve as dividers between INDOOR sports courts.
-As designed, the walls will support themselves for the most part but a system, likely ClarkDietrich LGPW36 and PW36 supports should be utilized as necessary.
-The anchor/fasteners should be specified for anchoring in concrete slab (34 years old) with approx 1.5" of new asphalt on top.
-The asphalt will be finished with multiple layers of outdoor finishing paint, as used to finish tennis courts so it must be determined if a pressure treated bottom plate is required. Again, the project is indoors and the concrete slab is 34 years old.
-Sketchup rendition of project included. NOTE the 42" pony walls are the only new build. All other walls are existing and will not be changed.
I need stamped framing drawings for a job in New Hampshire. Budget is $750-1200. License must apply in NH.
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top) pony walls that will serve as dividers between INDOOR sports courts.
-As designed, the walls will support themselves for the most part but a system, likely ClarkDietrich LGPW36 and PW36 supports should be utilized as necessary.
-The anchor/fasteners should be specified for anchoring in concrete slab (34 years old) with approx 1.5" of new asphalt on top.
-The asphalt will be finished with multiple layers of outdoor finishing paint, as used to finish tennis courts so it must be determined if a pressure treated bottom plate is required. Again, the project is indoors and the concrete slab is 34 years old.
-Sketchup rendition of project included. NOTE the 42" pony walls are the only new build. All other walls are existing and will not be changed.
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top) pony walls that will serve as dividers between INDOOR sports courts.
-As designed, the walls will support themselves for the most part but a system, likely ClarkDietrich LGPW36 and PW36 supports should be utilized as necessary.
-The anchor/fasteners should be specified for anchoring in concrete slab (34 years old) with approx 1.5" of new asphalt on top.
-The asphalt will be finished with multiple layers of outdoor finishing paint, as used to finish tennis courts so it must be determined if a pressure treated bottom plate is required. Again, the project is indoors and the concrete slab is 34 years old.
-Sketchup rendition of project included. NOTE the 42" pony walls are the only new build. All other walls are existing and will not be changed.
I need stamped framing drawings for a job in New Hampshire. Budget is $750-1200. License must apply in NH.
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top)... read more
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top)... read more
I need stamped framing drawings for a job in New Hampshire. Budget is $750-1200. License must apply in NH.
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top) pony walls that will serve as dividers between INDOOR sports courts.
-As designed, the walls will support themselves for the most part but a system, likely ClarkDietrich LGPW36 and PW36 supports should be utilized as necessary.
-The anchor/fasteners should be specified for anchoring in concrete slab (34 years old) with approx 1.5" of new asphalt on top.
-The asphalt will be finished with multiple layers of outdoor finishing paint, as used to finish tennis courts so it must be determined if a pressure treated bottom plate is required. Again, the project is indoors and the concrete slab is 34 years old.
-Sketchup rendition of project included. NOTE the 42" pony walls are the only new build. All other walls are existing and will not be changed. read less
-This is a one time project and the drawings are needed ASAP for building permit application in Lebanon, NH. I do have one more quick, related second project if this one goes well.
-~500 linear feet of 42" tall, wood frame 2x4, (finished with 1/2 drywall on both sides and 1x6 boards on top) pony walls that will serve as dividers between INDOOR sports courts.
-As designed, the walls will support themselves for the most part but a system, likely ClarkDietrich LGPW36 and PW36 supports should be utilized as necessary.
-The anchor/fasteners should be specified for anchoring in concrete slab (34 years old) with approx 1.5" of new asphalt on top.
-The asphalt will be finished with multiple layers of outdoor finishing paint, as used to finish tennis courts so it must be determined if a pressure treated bottom plate is required. Again, the project is indoors and the concrete slab is 34 years old.
-Sketchup rendition of project included. NOTE the 42" pony walls are the only new build. All other walls are existing and will not be changed. read less
Things to know
Any
Skill Level
$1,200
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D CAD Design
Job categories
Architectural Drafting Services
Structural Engineering
About the client
Payment ready
United States (06:34 pm)
Posted
Active
Job activity
21 Applicants
0 interviews in progress
1 unanswered invites
Similar jobs
Interior/Architectural CAD Drafter for Restaurant Buildout
Remote - Posted
We are seeking a CAD drafter to finalize construction documentation for the Goodfellas Pizza commercial kitchen buildout. Much of the groundwork has already been completed — e...
Architectural Drafting Services
2D Drawings and Floor Plans
View job
Freelance Architectural Drafter & 3D Modeler (Minnesota Preferred)
Remote - Posted
Designs by Bethany, LLC is a small, growing residential design studio looking for a dependable freelance drafter and 3D modeler. You’ll help transform 2D architectural drawing...
3D Architectural Modeling
Architectural 3D Modeling
Architectural Drafting Services
CAD Drafting Services
View job
Recap to Revit Structural Model
Remote - Posted
We need to scan a 14000 square metre structural steel warehouse in South Africa and create the Revit structural model for this. We will do the sacn using an FJD Trion S2 handh...
Revit Design Services
Structural Engineering
Revit Conversion Services
View job
Create CAD/Revit Single Family Dwelling permit ready plan set. Partial residential home plan set (2) floor plans (4) elevations, window schedule,
Remote - Posted
I am a custom home builder in Colorado. I am building a home for my self. I have hand drawn design to scale with dimensions, that I need turned into .dwg and .pdf preferabl...
Revit Design Services
2D Drawings and Floor Plans
Architectural Drafting Services
Architectural Site Plans
View job
Idea Statica Concrete Column-Beam, Steel Connection Design
Remote - Posted
I need a full design package for a steel connection between a reinforced-concrete column and a beam, modelled and verified exclusively in IDEA Statica Connection and IDEA Stat...
3D Design Services
Structural Design Services
Structural Engineering
Steel Detailing Services
Engineering Design
View job
SENIOR STRUCTURE ENGINEER
Remote - Posted
Preparing structural concept along with the design stage of architectural concept.
2.Finalizing the structural concept and structural design.
3..Coordination with all other...
Structural Design Services
Structural Engineering
Engineering Design
View job
