Remote
Work location
CAD Pro Needed: Floor Plan & Full Construction Docs for Tanning Studio Ended
About the job
Looking for a skilled CAD designer or architect to bring my tanning studio to life! We need a complete set of construction-ready drawings, including floor plans, MEP, and everything needed for permits and build-out. Must be licensed to provide seal for architecture & MEP engineering in the state of Tennessee.
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restrooms, and utilities
*MEP drawings for electrical, plumbing, and HVAC
*All documentation needed to submit for permitting and construction
You should know your way around commercial build-outs and local codes, and be ready to deliver a complete, accurate set of CAD files. High attention to detail and experience with construction docs is a must. Let’s make this project smooth and professional!
See attached photo. The space is 30 ft wide by 100 ft deep. The front and rear exterior doors cannot be moved. The photo shows a side door, this is not there so please disregard. There are two restrooms side by side in the rear left corner of the space, these should stay as well. Walls on service rooms do not go all the way to the ceiling. I need a 12-15 ft deep lobby that goes all the way across the front of the space. Service rooms should be 9x9. Could get away with a few 8x8. HVAC should direct airflow towards the front of the space, where the heat emitting equipment will be placed.
This will be a one-time job for now, but will have 5-6 upcoming spaces. Timeline is ASAP.
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restrooms, and utilities
*MEP drawings for electrical, plumbing, and HVAC
*All documentation needed to submit for permitting and construction
You should know your way around commercial build-outs and local codes, and be ready to deliver a complete, accurate set of CAD files. High attention to detail and experience with construction docs is a must. Let’s make this project smooth and professional!
See attached photo. The space is 30 ft wide by 100 ft deep. The front and rear exterior doors cannot be moved. The photo shows a side door, this is not there so please disregard. There are two restrooms side by side in the rear left corner of the space, these should stay as well. Walls on service rooms do not go all the way to the ceiling. I need a 12-15 ft deep lobby that goes all the way across the front of the space. Service rooms should be 9x9. Could get away with a few 8x8. HVAC should direct airflow towards the front of the space, where the heat emitting equipment will be placed.
This will be a one-time job for now, but will have 5-6 upcoming spaces. Timeline is ASAP.
Looking for a skilled CAD designer or architect to bring my tanning studio to life! We need a complete set of construction-ready drawings, including floor plans, MEP, and everything needed for permits and build-out. Must be licensed to provide seal for architecture & MEP engineering in the state of Tennessee.
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restrooms, and utilities
*MEP drawings for electrical, plumbing, and HVAC
*All documentation needed to submit for permitting and construction
You should know your way around commercial build-outs and local codes, and be ready to deliver a complete, accurate set of CAD files. High attention to detail and experience with construction docs is a must. Let’s make this project smooth and professional!
See attached photo. The space is 30 ft wide by 100 ft deep. The front and rear exterior doors cannot be moved. The photo shows a side door, this is not there so please disregard. There are two restrooms side by side in the rear left corner of the space, these should stay as well. Walls on service rooms do not go all the way to the ceiling. I need a 12-15 ft deep lobby that goes all the way across the front of the space. Service rooms should be 9x9. Could get away with a few 8x8. HVAC should direct airflow towards the front of the space, where the heat emitting equipment will be placed.
This will be a one-time job for now, but will have 5-6 upcoming spaces. Timeline is ASAP.
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restrooms, and utilities
*MEP drawings for electrical, plumbing, and HVAC
*All documentation needed to submit for permitting and construction
You should know your way around commercial build-outs and local codes, and be ready to deliver a complete, accurate set of CAD files. High attention to detail and experience with construction docs is a must. Let’s make this project smooth and professional!
See attached photo. The space is 30 ft wide by 100 ft deep. The front and rear exterior doors cannot be moved. The photo shows a side door, this is not there so please disregard. There are two restrooms side by side in the rear left corner of the space, these should stay as well. Walls on service rooms do not go all the way to the ceiling. I need a 12-15 ft deep lobby that goes all the way across the front of the space. Service rooms should be 9x9. Could get away with a few 8x8. HVAC should direct airflow towards the front of the space, where the heat emitting equipment will be placed.
This will be a one-time job for now, but will have 5-6 upcoming spaces. Timeline is ASAP.
Looking for a skilled CAD designer or architect to bring my tanning studio to life! We need a complete set of construction-ready drawings, including floor plans, MEP, and everything needed for permits and build-out. Must be licensed to provide seal for architecture & MEP engineering in the state of Tennessee.
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restroom... read more
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restroom... read more
Looking for a skilled CAD designer or architect to bring my tanning studio to life! We need a complete set of construction-ready drawings, including floor plans, MEP, and everything needed for permits and build-out. Must be licensed to provide seal for architecture & MEP engineering in the state of Tennessee.
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restrooms, and utilities
*MEP drawings for electrical, plumbing, and HVAC
*All documentation needed to submit for permitting and construction
You should know your way around commercial build-outs and local codes, and be ready to deliver a complete, accurate set of CAD files. High attention to detail and experience with construction docs is a must. Let’s make this project smooth and professional!
See attached photo. The space is 30 ft wide by 100 ft deep. The front and rear exterior doors cannot be moved. The photo shows a side door, this is not there so please disregard. There are two restrooms side by side in the rear left corner of the space, these should stay as well. Walls on service rooms do not go all the way to the ceiling. I need a 12-15 ft deep lobby that goes all the way across the front of the space. Service rooms should be 9x9. Could get away with a few 8x8. HVAC should direct airflow towards the front of the space, where the heat emitting equipment will be placed.
This will be a one-time job for now, but will have 5-6 upcoming spaces. Timeline is ASAP. read less
What we need:
*A precise, detailed floor plan for reception, tanning rooms, restrooms, and utilities
*MEP drawings for electrical, plumbing, and HVAC
*All documentation needed to submit for permitting and construction
You should know your way around commercial build-outs and local codes, and be ready to deliver a complete, accurate set of CAD files. High attention to detail and experience with construction docs is a must. Let’s make this project smooth and professional!
See attached photo. The space is 30 ft wide by 100 ft deep. The front and rear exterior doors cannot be moved. The photo shows a side door, this is not there so please disregard. There are two restrooms side by side in the rear left corner of the space, these should stay as well. Walls on service rooms do not go all the way to the ceiling. I need a 12-15 ft deep lobby that goes all the way across the front of the space. Service rooms should be 9x9. Could get away with a few 8x8. HVAC should direct airflow towards the front of the space, where the heat emitting equipment will be placed.
This will be a one-time job for now, but will have 5-6 upcoming spaces. Timeline is ASAP. read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Part-time
Job type
3-6 months
Job duration
Areas of expertise
2D & 3D Architectural Design
2D & 3D Detailed Design
2D & 3D Floor Plans
Building Permit CAD Drawings
+1 more
Job categories
Construction Drawings
Architectural Drafting Services
2D Drawings and Floor Plans
Languages
English
Full professional proficiency
About the client
Payment not ready
United States (09:19 am)
Posted
Active
Job activity
25 Applicants
0 interviews in progress
Similar jobs
Drawings required in RFP
Remote - Posted
Require Drawings to be made as part of RFP to be floated, primarily for small interior fitout works
Architectural Drafting Services
Construction Drawings
Shop Drawing Services
View job
Looking for a industrial machine floor plan layout
Remote - Posted
I am coming with a new industrial shade it is in construction, now i have a present factory which I have to shift at this new unit , so i looking for freelance who can make a...
2D Drawings and Floor Plans
Industrial Design Services
Mechanical Drafting
2D CAD Drafting Services
Machine Design
View job
Cad precast structural designer
Remote - Posted
I want cad precast shop panel drawing urgently in the perfect manner
Structural Design Services
Construction Drawings
Shop Drawing Services
CAD Drafting Services
Steel Detailing Services
View job
CALIFORNIA - LOS ANGELES - Residential Drafter CAD
Remote - Posted
I need someone who is familiar with CBC and has experience with projects in LA
Mostly to finish drawings and make corrections per city requirements.
Work on AutoCad
AutoCAD Drafting & Design
New Residential Design
Architectural Drafting Services
CAD Drafting Services
Drafting and Design Services
View job
Structural Designer
Remote - Posted
Solar panel Mounting structure metal frame work design and 3d assembly drawing ,production or manufacturing drawing
Structural Design Services
Construction Drawings
Architectural Planning and Design
View job
Rebar bending schedules
Remote - Posted
Draw up rebar bending schedules from a mark-up plan for a house. Beams and slabs only.
Rebar Detailing and Drawing
Construction Drawings
Structural Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
214,972
global members
33,510
projects delivered to clients
Trusted by
