Remote
Work location
Create a Parametric Digital Twin from 2D PDF Drawings (SolidWorks • STEP AP242 • FEA/Kinematics) Ended
About the job
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you ex... read more
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you ex... read more
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO... read more
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO... read more
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Full-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D CAD Design
3D CAD Drafting
3D Mechanical Design
3D Modeling
3D Simulation
+2 more
Job categories
2D to 3D Modeling
2D CAD Drafting Services
3D Modeling
SolidWorks Design Services
CAD Conversion Services
+2 more
Languages
English
Professional working proficiency
About the client
Payment not ready
Iraq (01:56 pm)
Posted
Active
Job activity
41 Applicants
0 interviews in progress
9 unanswered invites
Similar jobs
CAD Designer Needed for Detailed Dog Clothing Pieces
Remote - Posted
I’m looking for an experienced CAD designer to create detailed 3D clothing pieces for a toy dog line.
The garments will be for small dogs and should be designed with producti...
3D Design Services
3D Modeling
Engineering Design
View job
Packaging CAD Designer Needed for Toy Product
Remote - Posted
I’m looking for an experienced CAD designer to help create detailed packaging designs for a toy product line.
The packaging will include:
• plastic + cardboard packaging, si...
Packaging Design
3D Design Services
3D Modeling
View job
Fusion 360 Structural/Manufacturing Modeler for Modular Steel Buildings
Remote - Posted
We are looking for an experienced Fusion 360 modeler to create fabrication-ready 3D models and shop drawings for modular steel buildings. The work includes heavy steel frames,...
Structural Design Services
Shop Drawing Services
3D Modeling
Steel Detailing Services
Mechanical Design Services
View job
cad designer
Remote - Posted
our team has a plan of building robots for party events so i need a designer who can draw a perfect model with some expertise
2D CAD Design Services
3D Design Services
3D Modeling
View job
Injection Mould Design
Remote - Posted
Design an injection mould for a clothes peg basket, that has an external undercut and through holes. Therefore the mould requires a dual action setup (for example slider in sl...
Mold and Die Design Services
3D Design Services
3D Modeling
View job
CAD Design for Clothing Hardware
Remote - Posted
Hi, I’m looking for a CAD designer to create a variety of custom rivet, button, and metal badge concepts for a clothing project, with stainless steel as the preferred material...
Drafting and Design Services
3D Design Services
3D Modeling
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
202,725
global members
33,270
projects delivered to clients
Trusted by
