Remote
Work location
Create a Parametric Digital Twin from 2D PDF Drawings (SolidWorks • STEP AP242 • FEA/Kinematics) Ended
About the job
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you ex... read more
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you ex... read more
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO... read more
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO... read more
We need an expert (or small team) to convert a full 2D PDF drawing set into a parametric, production-ready 3D digital twin in SolidWorks, with ISO-compliant drawings, BOMs, and basic simulations.
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
Scope (deliverables):
3D CAD (parametric): Top-level assembly + structured sub-assemblies/parts with materials & mass props.
Drawings (ISO): Fully dimensioned part/assembly drawings (GD&T per ISO 1101, ISO 8015/129-1/2768/286/1302/13715/2553 incl. welds & sheet-metal flat patterns).
BOMs: Top-level & purchasing BOM (XLSX/CSV); cut lists.
Simulation: Motion/kinematics check + FEA on critical parts, with short report (assumptions, safety factor).
Exports: Native SolidWorks files, STEP AP242 (preserve assembly tree), Parasolid, DXF/DWG, PDFs, 3D-PDF/eDrawings.
Quality bar:
Zero interferences, fully toleranced drawings, consistent BOMs, and a brief, reproducible FEA setup.
Standards & notes:
SolidWorks (recent version).
Risk notes per ISO 12100; awareness of EU Machinery Directive helpful.
NDA & full IP transfer required.
Include in your bid:
3–5 portfolio links (parametric assemblies, ISO drawings, FEA examples).
Your approach & timeline (milestones) and fixed price or hourly + cap.
Tools/versions (e.g., SW Simulation/Motion). Team size/roles if applicable.
Quick screening (answer briefly):
How do you structure large parametric assemblies to avoid rebuild loops?
One FEA example (loads/BCs, mesh, acceptance criteria).
Can you export STEP AP242 with correct assembly structure and supply 3D-PDF/eDrawings? read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Full-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D CAD Design
3D CAD Drafting
3D Mechanical Design
3D Modeling
3D Simulation
+2 more
Job categories
2D to 3D Modeling
2D CAD Drafting Services
3D Modeling
SolidWorks Design Services
CAD Conversion Services
+2 more
Languages
English
Professional working proficiency
About the client
Payment not ready
Iraq (09:01 pm)
Posted
Active
Job activity
41 Applicants
0 interviews in progress
9 unanswered invites
Similar jobs
Mechanical Product Designer for Compact Plastic Case (Sliding Mechanism, Prototype)
Remote - Posted
I am looking for an experienced mechanical product designer to develop a functional prototype of a small plastic consumer product.
The focus of this project is on mechanica...
Prototype Design Services
3D Modeling
3D Product Modeling
View job
Loudspeaker enclosure design
Remote - Posted
Basic speaker design needed. Enclosure with rectangular shape, two drivers, two ports and I ternal bracing. Just a development of an existing design. Just basic blueprint and...
3D Modeling
View job
Shock Assembly
Remote - Posted
I need a SolidWorks Student or Someone wanting to learn with some/minimal experience with assembly and tolerances. 3D with PDF, Sldrw, Sldprt, Step files. I have approximately...
2D to 3D Modeling
Mechanical Drawing Services
View job
Lead CAD Modeler: 1:1 3D Printed Footwear (LA Fashion Week Sprint)
Remote - Posted
The Mission
At VuelaNova, we are disrupting the footwear industry by bringing 1:1 bespoke 3D printed shoes to the mass market. We use proprietary AI scanning to create perfec...
3D Printing Design
3D Modeling
3D Printing Services
View job
Modular Snap-Fit Designer Toy – 3D CAD for FDM Printing
Remote - Posted
I need a character model rebuilt into a modular, snap-fit product for FDM 3D printing.
Key requirements:
Clean, watertight geometry (current model is from AI and unusabl...
3D CAD Translation Services
3D Modeling
3D Design Services
3D Product Modeling
3D Printing Design
View job
For Sohail (same as previous) Prepare CAD Files and PDF Explanation for retractable Handle with larger dimensions (V2)
Remote - Posted
Prepare 2D & 3D CAD files of each individual part and component of the handle for machinist to use. Also prepare a detailed PDF file with assembly explanation and diagram with...
3D Modeling
2D CAD Drafting Services
2D CAD Design Services
View job
