Remote
Work location
Architectural Designer – Adapt BC Standardized ADU01 into Permit-Ready Plan Set Ended
About the job
Description:
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
- Develop a complete CAD plan set for ADU01.
- Ensure compliance with BC Building Code and municipal permitting standards.
- Emphasis on structure and safety (Braced wall panels, handrails & guards, etc)
- MEP scope: include only essential fixture symbols and code-required notes (e.g., plumbing fixture layout, HRV location, smoke/CO detectors). Full MEP design and load calculations will be handled by trades/engineers during permitting
Purpose:
This is a pilot project to establish workflow, quality, and compatibility. If successful, additional work will follow:
- Other designs from the BC catalogue.
- Designs from other jurisdictions
- Variations of existing catalogue units (ex. substituting a hip roof with a low-slope roof).
What We’re Looking For:
- Background in architectural design with proven experience in permit-ready drawings.
- Familiarity with the BC building code and municipal submission standards - Specifically for Victoria BC.
- Ability to balance standardized catalogue compliance with practical construction detail.
- Clear communication and ability to docu... read more
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
- Develop a complete CAD plan set for ADU01.
- Ensure compliance with BC Building Code and municipal permitting standards.
- Emphasis on structure and safety (Braced wall panels, handrails & guards, etc)
- MEP scope: include only essential fixture symbols and code-required notes (e.g., plumbing fixture layout, HRV location, smoke/CO detectors). Full MEP design and load calculations will be handled by trades/engineers during permitting
Purpose:
This is a pilot project to establish workflow, quality, and compatibility. If successful, additional work will follow:
- Other designs from the BC catalogue.
- Designs from other jurisdictions
- Variations of existing catalogue units (ex. substituting a hip roof with a low-slope roof).
What We’re Looking For:
- Background in architectural design with proven experience in permit-ready drawings.
- Familiarity with the BC building code and municipal submission standards - Specifically for Victoria BC.
- Ability to balance standardized catalogue compliance with practical construction detail.
- Clear communication and ability to docu... read more
Description:
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
- Develop a complete CAD plan set for ADU01.
- Ensure compliance with BC Building Code and municipal permitting standards.
- Emphasis on structure and safety (Braced wall panels, handrails & guards, etc)
- MEP scope: include only essential fixture symbols and code-required notes (e.g., plumbing fixture layout, HRV location, smoke/CO detectors). Full MEP design and load calculations will be handled by trades/engineers during permitting
Purpose:
This is a pilot project to establish workflow, quality, and compatibility. If successful, additional work will follow:
- Other designs from the BC catalogue.
- Designs from other jurisdictions
- Variations of existing catalogue units (ex. substituting a hip roof with a low-slope roof).
What We’re Looking For:
- Background in architectural design with proven experience in permit-ready drawings.
- Familiarity with the BC building code and municipal submission standards - Specifically for Victoria BC.
- Ability to balance standardized catalogue compliance with practical construction detail.
- Clear communication and ability to document questions or code issues.
Deliverable:
- Permit-ready CAD plan set for ADU01, suitable for municipal submission, with essential MEP notes (but no detailed MEP design), and BCBC2024 code references placed at the relevant points on the drawing.
- Full editable source files (RVT or DWG) along with PDFs.
- All intellectual property and usage rights will transfer to us upon payment. We require exclusive ownership of the adapted plan sets.
- We prefer Revit files but may accept AutoCAD drafting for the pilot project.
The housing design catalogue can be found here: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/construction-industry/building-codes-and-standards/guides/bc_std_des_catalogue_v1.pdf
List of Items to Address:
- Add window & flashing details to plan set
- Add footing and foundation details for
-- Slab,
-- 1.8m tall conditioned crawl space
-- full height basement
- Rebar requirements for foundation as listed above
- Lateral Bracing requirements for building, including Braced Wall Panel details.
- Wind and Snow Load Calculations for Lower Vancouver Island
- Include blank plan pages in the package for:
-- Site Plan & Survey (Building is to be placed in the site context at a later time).
-- Landscape plans page(s)
-- Civil / Site Servicing / Grading / Stormwater / Drainage page(s)
The ADU01 default package has been attached. read less
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
- Develop a complete CAD plan set for ADU01.
- Ensure compliance with BC Building Code and municipal permitting standards.
- Emphasis on structure and safety (Braced wall panels, handrails & guards, etc)
- MEP scope: include only essential fixture symbols and code-required notes (e.g., plumbing fixture layout, HRV location, smoke/CO detectors). Full MEP design and load calculations will be handled by trades/engineers during permitting
Purpose:
This is a pilot project to establish workflow, quality, and compatibility. If successful, additional work will follow:
- Other designs from the BC catalogue.
- Designs from other jurisdictions
- Variations of existing catalogue units (ex. substituting a hip roof with a low-slope roof).
What We’re Looking For:
- Background in architectural design with proven experience in permit-ready drawings.
- Familiarity with the BC building code and municipal submission standards - Specifically for Victoria BC.
- Ability to balance standardized catalogue compliance with practical construction detail.
- Clear communication and ability to document questions or code issues.
Deliverable:
- Permit-ready CAD plan set for ADU01, suitable for municipal submission, with essential MEP notes (but no detailed MEP design), and BCBC2024 code references placed at the relevant points on the drawing.
- Full editable source files (RVT or DWG) along with PDFs.
- All intellectual property and usage rights will transfer to us upon payment. We require exclusive ownership of the adapted plan sets.
- We prefer Revit files but may accept AutoCAD drafting for the pilot project.
The housing design catalogue can be found here: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/construction-industry/building-codes-and-standards/guides/bc_std_des_catalogue_v1.pdf
List of Items to Address:
- Add window & flashing details to plan set
- Add footing and foundation details for
-- Slab,
-- 1.8m tall conditioned crawl space
-- full height basement
- Rebar requirements for foundation as listed above
- Lateral Bracing requirements for building, including Braced Wall Panel details.
- Wind and Snow Load Calculations for Lower Vancouver Island
- Include blank plan pages in the package for:
-- Site Plan & Survey (Building is to be placed in the site context at a later time).
-- Landscape plans page(s)
-- Civil / Site Servicing / Grading / Stormwater / Drainage page(s)
The ADU01 default package has been attached. read less
Description:
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
-... read more
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
-... read more
Description:
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
- Develop a complete CAD plan set for ADU01.
- Ensure compliance with BC Building Code and municipal permitting standards.
- Emphasis on structure and safety (Braced wall panels, handrails & guards, etc)
- MEP scope: include only essential fixture symbols and code-required notes (e.g., plumbing fixture layout, HRV location, smoke/CO detectors). Full MEP design and load calculations will be handled by trades/engineers during permitting
Purpose:
This is a pilot project to establish workflow, quality, and compatibility. If successful, additional work will follow:
- Other designs from the BC catalogue.
- Designs from other jurisdictions
- Variations of existing catalogue units (ex. substituting a hip roof with a low-slope roof).
What We’re Looking For:
- Background in architectural design with proven experience in permit-ready drawings.
- Familiarity with the BC building code and municipal submission standards - Specifically for Victoria BC.
- Ability to balance standardized catalogue compliance with practical construction detail.
- Clear communication and ability to document questions or code issues.
Deliverable:
- Permit-ready CAD plan set for ADU01, suitable for municipal submission, with essential MEP notes (but no detailed MEP design), and BCBC2024 code references placed at the relevant points on the drawing.
- Full editable source files (RVT or DWG) along with PDFs.
- All intellectual property and usage rights will transfer to us upon payment. We require exclusive ownership of the adapted plan sets.
- We prefer Revit files but may accept AutoCAD drafting for the pilot project.
The housing design catalogue can be found here: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/construction-industry/building-codes-and-standards/guides/bc_std_des_catalogue_v1.pdf
List of Items to Address:
- Add window & flashing details to plan set
- Add footing and foundation details for
-- Slab,
-- 1.8m tall conditioned crawl space
-- full height basement
- Rebar requirements for foundation as listed above
- Lateral Bracing requirements for building, including Braced Wall Panel details.
- Wind and Snow Load Calculations for Lower Vancouver Island
- Include blank plan pages in the package for:
-- Site Plan & Survey (Building is to be placed in the site context at a later time).
-- Landscape plans page(s)
-- Civil / Site Servicing / Grading / Stormwater / Drainage page(s)
The ADU01 default package has been attached. read less
We are seeking an architectural designer to review ADU01 from the BC Standardized Housing Design Catalogue and develop it into a permit-ready plan set except for some items as noted at the end of this post. This job is focused on the primary structural elements of the building itself; the other plans, surveys, and landscaping to be added at a later date.
Scope (This Project):
- Develop a complete CAD plan set for ADU01.
- Ensure compliance with BC Building Code and municipal permitting standards.
- Emphasis on structure and safety (Braced wall panels, handrails & guards, etc)
- MEP scope: include only essential fixture symbols and code-required notes (e.g., plumbing fixture layout, HRV location, smoke/CO detectors). Full MEP design and load calculations will be handled by trades/engineers during permitting
Purpose:
This is a pilot project to establish workflow, quality, and compatibility. If successful, additional work will follow:
- Other designs from the BC catalogue.
- Designs from other jurisdictions
- Variations of existing catalogue units (ex. substituting a hip roof with a low-slope roof).
What We’re Looking For:
- Background in architectural design with proven experience in permit-ready drawings.
- Familiarity with the BC building code and municipal submission standards - Specifically for Victoria BC.
- Ability to balance standardized catalogue compliance with practical construction detail.
- Clear communication and ability to document questions or code issues.
Deliverable:
- Permit-ready CAD plan set for ADU01, suitable for municipal submission, with essential MEP notes (but no detailed MEP design), and BCBC2024 code references placed at the relevant points on the drawing.
- Full editable source files (RVT or DWG) along with PDFs.
- All intellectual property and usage rights will transfer to us upon payment. We require exclusive ownership of the adapted plan sets.
- We prefer Revit files but may accept AutoCAD drafting for the pilot project.
The housing design catalogue can be found here: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/construction-industry/building-codes-and-standards/guides/bc_std_des_catalogue_v1.pdf
List of Items to Address:
- Add window & flashing details to plan set
- Add footing and foundation details for
-- Slab,
-- 1.8m tall conditioned crawl space
-- full height basement
- Rebar requirements for foundation as listed above
- Lateral Bracing requirements for building, including Braced Wall Panel details.
- Wind and Snow Load Calculations for Lower Vancouver Island
- Include blank plan pages in the package for:
-- Site Plan & Survey (Building is to be placed in the site context at a later time).
-- Landscape plans page(s)
-- Civil / Site Servicing / Grading / Stormwater / Drainage page(s)
The ADU01 default package has been attached. read less
Things to know
Intermediate
Skill Level
Open budget
Hourly
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D Architectural Design
2D & 3D CAD Design
2D & 3D Drafting
Architectural Drawings
+1 more
Job categories
Architectural Drafting Services
Construction Drawings
As-Built Drawings
Architectural Planning and Design
+1 more
About the client
Payment ready
Canada (10:30 am)
Posted
Active
Job activity
28 Applicants
2 interviews in progress
Similar jobs
Drawings required in RFP
Remote - Posted
Require Drawings to be made as part of RFP to be floated, primarily for small interior fitout works
Architectural Drafting Services
Construction Drawings
Shop Drawing Services
View job
Industrial machine floor plan layout
Remote - Posted
Machine floor plan layout for my new factory where I want to shift my existing factory so I want a machine floor plan drawing so that I can plan my whole manufacturer process
Floor Plan Design
3D Floor Plan Design
Architectural Planning and Design
Industrial Design Services
Mechanical Drafting
View job
Site Survey
Remote - Posted
Need to convert survey report to autocad version. We have attached site survey report in Zip file.
Architectural Planning and Design
Design & Drafting
3D Design Services
View job
Junior Architectural Lighting Designer
Remote - Posted
Architecture / Interior Architecture / Lighting Design
AutoCAD proficiency
Excellent RCP/documentation ability
Understanding of architectural details
Interior-desi...
Lighting Design
Interior Design
Architectural Planning and Design
2D CAD Design Services
View job
Cad precast structural designer
Remote - Posted
I want cad precast shop panel drawing urgently in the perfect manner
Structural Design Services
Construction Drawings
Shop Drawing Services
CAD Drafting Services
Steel Detailing Services
View job
CALIFORNIA - LOS ANGELES - Residential Drafter CAD
Remote - Posted
I need someone who is familiar with CBC and has experience with projects in LA
Mostly to finish drawings and make corrections per city requirements.
Work on AutoCad
AutoCAD Drafting & Design
New Residential Design
Architectural Drafting Services
CAD Drafting Services
Drafting and Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
215,014
global members
33,512
projects delivered to clients
Trusted by
